Structural performance of light steel framing panels using screw connections subjected to lateral loading
暂无分享,去创建一个
Paulo Santos | Helena Gervásio | L. Simões da Silva | J. Henriques | N. Rosa | P. Santos | L. Silva | H. Gervásio | J. Henriques | N. Rosa
[1] Raffaele Landolfo,et al. Experimental investigation of seismic behaviour of low dissipative CFS strap-braced stud walls , 2016 .
[2] Benjamin W. Schafer,et al. Lateral stiffness and strength of sheathing braced cold-formed steel stud walls , 2012 .
[3] Eray Baran,et al. Behavior of cold-formed steel wall panels under monotonic horizontal loading , 2012 .
[4] Reynaud Serrette,et al. Shear Resistance of Gypsum-Sheathed Light-Gauge Steel Stud Walls , 1996 .
[5] Antonio Rodríguez-Ferran,et al. Experimental testing of joints for seismic design of lightweight structures. Part 1. Screwed joints in straps , 2006 .
[6] Shahrin Mohammad,et al. Review on Cold-Formed Steel Connections , 2014, TheScientificWorldJournal.
[7] Y. S. Tian,et al. Racking Strength and Stiffness of Cold-Formed Steel Wall Frames , 2004 .
[8] Stephen G. Buonopane,et al. Computationally Efficient Fastener-Based Models of Cold-Formed Steel Shear Walls with Wood Sheathing , 2015 .
[9] Raffaele Landolfo,et al. Seismic response of Cfs strap-braced stud walls: Theoretical study , 2014 .
[10] L. Simões da Silva. Towards a consistent design approach for steel joints under generalized loading , 2008 .
[11] D Dubina,et al. PERFORMANCE OF WALL-STUD COLD-FORMED SHEAR PANELS UNDER MONOTONIC AND CYCLIC LOADING PART I: EXPERIMENTAL RESEARCH , 2004 .
[12] Jörg Lange,et al. Behaviour of cold-formed steel shear walls under horizontal and vertical loads , 2006 .
[13] Dan Dubina,et al. Design Criteria for Seam and Sheeting-to-Framing Connections of Cold-Formed Steel Shear Panels , 2006 .
[14] Colin A. Rogers,et al. Light-gauge steel-frame wood structural panel shear wall design method , 2006 .
[15] Dan Dubina,et al. Performance of wall-stud cold-formed shear panels under monotonic and cyclic loading. Part II: Numerical modelling and performance analysis , 2004 .
[16] Raffaele Landolfo,et al. Experimental tests on typical screw connections for cold-formed steel housing , 2007 .
[17] Ralph M. Richard,et al. Versatile Elastic-Plastic Stress-Strain Formula , 1975 .
[18] Reynaud Serrette,et al. Static racking behavior of plywood, OSB, gypsum, and FiberBond walls with metal framing , 1997 .
[19] Colin A. Rogers,et al. Behaviour of light-gauge steel-frame - wood structural panel shear walls , 2006 .
[20] Luís Simões da Silva,et al. Numerical modeling of composite beam to reinforced concrete wall joints: part I: calibration of joint components , 2013 .
[21] R. A. Laboube,et al. Behavior of Screw Connections in Residential Construction , 2002 .
[22] Raffaele Landolfo,et al. Seismic response of Cfs strap-braced stud walls: Experimental investigation , 2014 .
[23] Raffaele Landolfo,et al. Sheathed cold-formed steel housing: A seismic design procedure , 2009 .