Mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane composites

A study on mechanical properties of soil buried kenaf fibre reinforced thermoplastic polyurethane (TPU) composites is presented in this paper. Kenaf bast fibre reinforced TPU composites were prepared via melt-mixing method using Haake Polydrive R600 internal mixer. The composites with 30% fibre loading were prepared based on some important parameters; i.e. 190 °C for reaction temperature, 11 min for reaction time and 400 rpm for rotating speed. The composites were subjected to soil burial tests where the purpose of these tests was to study the effect of moisture absorption on the mechanical properties of the composites. Tensile and flexural properties of the composites were determined before and after the soil burial tests for 20, 40, 60 and 80 days. The percentages of both moisture uptake and weight gain after soil burial tests were recorded. Tensile strength of kenaf fibre reinforced TPU composite dropped to ∼16.14 MPa after 80 days of soil burial test. It was also observed that there was no significant change in flexural properties of soil buried kenaf fibre reinforced TPU composite specimens.

[1]  D. Ahmad,et al.  Concept selection of car bumper beam with developed hybrid bio-composite material , 2011 .

[2]  S. Sapuan,et al.  Water absorption and tensile properties of soil buried kenaf fibre reinforced unsaturated polyester composites (KFRUPC) , 2009 .

[3]  K. Abdan,et al.  Review of kenaf fiber reinforced polymer composites , 2009 .

[4]  S. Sapuan,et al.  COMBINED EFFECTS OF WATER ABSORPTION DUE TO WATER IMMERSION, SOIL BURIED AND NATURAL WEATHER ON MECHANICAL PROPERTIES OF KENAF FIBRE UNSATURATED POLYESTER COMPOSITES (KFUPC) , 2010 .

[5]  Z. Ishak,et al.  Behavior of kenaf fibers after immersion in several water conditions , 2011, BioResources.

[6]  Jilei Zhang,et al.  Temperature and loading rate effects on tensile properties of kenaf bast fiber bundles and composites , 2008 .

[7]  S. Sapuan,et al.  Influence of chemical treatment on the tensile properties of kenaf fiber reinforced thermoplastic polyurethane composite , 2012 .

[8]  Khalina Abdan,et al.  KENAF FIBRES AS REINFORCEMENT FOR POLYMERIC COMPOSITES: A REVIEW , 2009 .

[9]  S. M. Sapuan,et al.  The Effect of Environmental Treatments on Fiber Surface Properties and Tensile Strength of Sugar Palm Fiber-Reinforced Epoxy Composites , 2008 .

[10]  S. Zakaria,et al.  Removal of Copper(II) Ions from Aqueous Solution Using Alkali-Treated Kenaf Core Fibres , 2010 .

[11]  Z. Ishak,et al.  Kenaf fiber reinforced composites: A review , 2011 .

[12]  M. Couturier,et al.  Resin transfer molding of natural fiber reinforced composites: cure simulation , 2004 .

[13]  S. M. Sapuan,et al.  Influence of fiber content on the mechanical and thermal properties of Kenaf fiber reinforced thermoplastic polyurethane composites , 2012 .

[14]  S. Sapuan,et al.  Effect of alkali treatment on mechanical and thermal properties of Kenaf fiber-reinforced thermoplastic polyurethane composite , 2012, Journal of Thermal Analysis and Calorimetry.

[15]  I. Choi,et al.  Biodegradability of bio-flour filled biodegradable poly(butylene succinate) bio-composites in natural and compost soil , 2006 .

[16]  Mohd Sapuan Salit,et al.  Development of a new kenaf bast fiber-reinforced thermoplastic polyurethane composite , 2011, BioResources.

[17]  M. Paridah,et al.  Retting process of some bast plant fibers and its effect on fibre quality: A review , 2011, BioResources.