This paper proposes a force magnifying mechanism for a parallel jaw gripper that can exert a large grasp force. A parallel jaw gripper requires speed when opening and closing its jaws, and force when grasping an object. The proposed force magnifying mechanism consists of a slider, feed screws, gears, a lever, etc. It runs sequentially with only one DC-motor. Basically the motor rotates a feed screw to move its output jaw quickly to an object with a gear. When the output jaw makes contact with an object, the gear is loosened from a stopper and starts to move axially along the feed screw. Then it pushes a lever, which generates a large fingertip force. We have developed an 86g gripper with this mechanism and experimentally verified that it can grasp objects of various sizes with a large grasp force over 200N. It is also experimentally verified that the gripper can grasp and ungrasp an object reliably over 4500 times if machine lubricant is properly supplied.
[1]
T. Omata,et al.
Load-sensitive continuously variable transmission for powerful and inexpensive robot hands
,
2004,
IEEE Conference on Robotics and Automation, 2004. TExCRA Technical Exhibition Based..
[2]
Paul Ciprian Patic,et al.
THE BARRETTHAND GRASPER - PROGRAMMABLY FLEXIBLE PART HANDLING AND ASSEMBLY
,
2006
.
[3]
Toru Omata,et al.
Load-sensitive continuously variable transmission for robot hands
,
2004,
IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.
[4]
Shigeo Hirose,et al.
Development of X-screw: a load-sensitive actuator incorporating a variable transmission
,
1999,
Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).