A Smart-Card E-paper Display System Based on RF Power Harvesting

ABSTRACT This study investigated technologies related to a smart-card display and its wireless charging system, where the wireless receiver in the smart card receives not only the data but also the power required for the display circuitry. The goal of this research was to achieve the required energy transfer during the extremely short reading time when a person swipes his or her smart card. This paper describes the design considerations and the analysis procedures of the transmitter and receiver pair for an electronic paper (E-paper) display. A series of magnetic simulations as well as experimental tests were conducted to investigate the various design factors. The design considerations included the shape and effect of using ferromagnetic cores, the component design for frequency tuning, the geometric arrangements, and the number of turns of the coils. A novel design for power transmission is then proposed using a ferromagnetic core to enhance its energy efficiency. In experiments the transmitter unit provided 250 mW of power to the transmitter antenna. The resultant transmission efficiency (S21) was −5.1 dB over a distance of 4.3 mm. Experimental results show that the smart card receives 220 mW, representing a high transmission efficiency of 88%.

[1]  W. Marsden.  I and J , 2012 .

[2]  Jochen Teizer,et al.  SmartHat: A battery-free worker safety device employing passive UHF RFID technology , 2011, 2011 IEEE International Conference on RFID.

[3]  A. Akhnoukh,et al.  An Integration Scheme for RF Power Harvesting , 2005 .

[4]  Martin Fischer,et al.  Fully integrated passive UHF RFID transponder IC with 16.7-μW minimum RF input power , 2003, IEEE J. Solid State Circuits.

[5]  Yoshihiro Kawahara,et al.  A battery-less, wireless mote for scavenging wireless power at UHF (470–570 MHz) frequencies , 2011, 2011 IEEE International Symposium on Antennas and Propagation (APSURSI).

[6]  Maysam Ghovanloo,et al.  A Wide-Band Power-Efficient Inductive Wireless Link for Implantable Microelectronic Devices Using Multiple Carriers , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[7]  G. Iannaccone,et al.  Design criteria for the RF section of UHF and microwave passive RFID transponders , 2005, IEEE Transactions on Microwave Theory and Techniques.

[8]  Klaus Finkenzeller,et al.  Book Reviews: RFID Handbook: Fundamentals and Applications in Contactless Smart Cards and Identification, 2nd ed. , 2004, ACM Queue.

[9]  Hamid Jabbar,et al.  RF energy harvesting system and circuits for charging of mobile devices , 2010, IEEE Transactions on Consumer Electronics.

[10]  Stavros Chatzandroulis,et al.  A RF power harvester with integrated antenna capable of operating near ground planes , 2012 .

[11]  C.M. Zierhofer,et al.  Geometric approach for coupling enhancement of magnetically coupled coils , 1996, IEEE Transactions on Biomedical Engineering.

[12]  Yvonne Schuhmacher,et al.  Rfid Handbook Fundamentals And Applications In Contactless Smart Cards And Identification , 2016 .

[13]  Shih-Yuan Chen,et al.  A Novel Dual-Antenna Structure for UHF RFID Tags , 2011 .

[14]  Erwin S. Hochmair,et al.  System Optimization for Improved Accuracy in Transcutaneous Signal and Power Transmission , 1984, IEEE Transactions on Biomedical Engineering.

[15]  Stavros Chatzandroulis,et al.  A low power RF harvester for a smart passive sensor tag with integrated antenna , 2012 .

[16]  Thomas Steven Salter,et al.  Low Power Smartdust Receiver with Novel Applications and Improvements of an RF Power Harvesting Circuit , 2009 .

[17]  L. Hannakam.  Berechnung der Gegeninduktivität achsenparalleler Zylinderspulen , 1967 .

[18]  Hsueh-Jyh Li,et al.  A Novel Dual-Antenna Structure for UHF RFID Tags , 2011, IEEE Transactions on Antennas and Propagation.

[19]  Jorge R. Fernandes,et al.  Energy harvesting circuit using integrated transformer , 2011, 2011 IEEE International Symposium of Circuits and Systems (ISCAS).

[20]  Fei Yuan,et al.  Design techniques for power harvesting of passive wireless microsensors , 2008, 2008 51st Midwest Symposium on Circuits and Systems.