Application of amorphous silica nanoparticles in improving the rheological properties, filtration and shale stability of glycol-based drilling fluids

Abstract The drilling process in shale formations and well stability in the presence of shale are among the most challenging issues in the drilling industry. Routinely, oil-based drilling fluids are used for drilling troublesome shale formations. However, oil-based drilling muds have a number of significant disadvantages, including very high cost, causing severe damage to the environment, and interfering with the well-logging process. To address this issue, a sustainable glycol-based drilling fluid is designed in this study to substitute the routinely used oil-based drilling fluids. In the first step, amorphous silica nanoparticles with different particle sizes (12, 22, and 54 nm) are prepared from rice husks. The prepared nanoparticles are then dispersed in water and added to the glycol-based mud as a liquid-based additive. Finally, the effect of silica nanoparticles on rheological properties, filtration, and shale stability of glycol drilling fluid is studied. The results show that the use of silica nanoparticles improves the rheological properties of glycol drilling fluid. This improvement is a function of the amount and size of nanoparticles. Adding silica nanoparticles also decreases fluid loss and increases the thermal stability of the drilling fluid. Moreover, silica nanoparticles can effectively plug nanoscale pores of Gurpi shale resulting in increasing the shale cutting recovery and decreasing the penetration rate of glycol drilling fluid into the Gurpi shale samples.

[1]  T. Subhani,et al.  Towards tunable size of silica particles from rice husk , 2015 .

[2]  Tae-sun Chang,et al.  One-step synthesis of structurally controlled silicate particles from sodium silicates using a simple precipitation process. , 2010, Langmuir : the ACS journal of surfaces and colloids.

[3]  Z. Qiu,et al.  Preparation and performance properties of polymer latex SDNL in water-based drilling fluids for drilling troublesome shale formations , 2017 .

[4]  Mohammad Mehdi Rashidi,et al.  Lattice Boltzmann simulation of 3D natural convection in a cuboid filled with KKL-model predicted nanofluid using Dual-MRT model , 2019, International Journal of Numerical Methods for Heat & Fluid Flow.

[5]  M. Afrand,et al.  On evaluation of thermophysical properties of transformer oil-based nanofluids: A comprehensive modeling and experimental study , 2020 .

[6]  Zisis Vryzas,et al.  Nano-Based Drilling Fluids: A Review , 2017 .

[7]  D. Bassett,et al.  The effect of alkali halides and silver nitrate on the crystallization of silica powders , 1972 .

[8]  M. Moraveji,et al.  Synthesis, structure and mechanical properties of nanocomposites based on exfoliated nano magnesium silicate crystal and poly(acrylamide) , 2018, Journal of Dispersion Science and Technology.

[9]  Mostafa Keshavarz Moraveji,et al.  Experimental and field test analysis of different loss control materials for combating lost circulation in bentonite mud , 2017 .

[10]  R. Rafati,et al.  Effect of nanoparticles on the modifications of drilling fluids properties : A review of recent advances , 2018 .

[11]  J. Cunha,et al.  Pressure Losses Of Non-Newtonian Fluids In Drilling Operations , 2007 .

[12]  A. Purusothaman.  Investigation of natural convection heat transfer performance of the QFN-PCB electronic module by using nanofluid for power electronics cooling applications , 2018 .

[13]  Farough Agin,et al.  The effect of 1,6-hexamethylenediamine on thermal stability and shale cutting recovery of heavy weight drilling fluids , 2019, Journal of Petroleum Exploration and Production Technology.

[14]  R. Grant,et al.  Development of a chronic inhalation reference value for hexamethylenediamine using an exposure model based on the dihydrochloride salt , 2015, Inhalation toxicology.

[15]  Hao Zhang,et al.  Experimental study of nano-drilling fluid based on nano temporary plugging technology and its application mechanism in shale drilling , 2019, Applied Nanoscience.

[16]  D. Estenoz,et al.  Functional characterization on colloidal suspensions containing xanthan gum (XGD) and polyanionic cellulose (PAC) used in drilling fluids for a shale formation , 2017 .

[17]  André Guinier,et al.  X-ray Crystallography. (Book Reviews: X-Ray Diffraction in Crystals, Imperfect Crystals, and Amorphous Bodies) , 1963 .

[18]  V. P. Della,et al.  Rice husk ash as an alternate source for active silica production , 2002 .

[19]  Ali J. Chamkha,et al.  3D modeling of natural convective heat transfer from a varying rectangular heat generating source , 2019, Journal of Thermal Analysis and Calorimetry.

[20]  R. Sekar,et al.  Magnetic field and vibration effects on the onset of thermal convection in a grade fluid permeated anisotropic porous module , 2019, Thermal Science and Engineering Progress.

[21]  Oscar M. Contreras,et al.  Experimental Investigation on Wellbore Strengthening In Shales by Means of Nanoparticle-Based Drilling Fluids , 2014 .

[22]  Ahmadreza Ghaffarkhah,et al.  Effect of silica nanoparticle size on the mechanical strength and wellbore plugging performance of SPAM/chromium (III) acetate nanocomposite gels , 2019, Polymer Journal.

[23]  Richard A Becker,et al.  Approaches for describing and communicating overall uncertainty in toxicity characterizations: U.S. Environmental Protection Agency's Integrated Risk Information System (IRIS) as a case study. , 2016, Environment international.

[24]  Zhiping Luo,et al.  Silica nanoparticles and frameworks from rice husk biomass. , 2012, ACS applied materials & interfaces.

[25]  B. Safi,et al.  Valorization of KCl/PHPA system of water-based drilling fluid in presence of reactive clay: Application on Algerian field , 2017 .

[26]  Wenqin Dai,et al.  Thermo-sensitive polymer nanospheres as a smart plugging agent for shale gas drilling operations , 2016, Petroleum Science.

[27]  Jie Cao,et al.  Synergistic stabilization of shale by a mixture of polyamidoamine dendrimers modified bentonite with various generations in water-based drilling fluid , 2015 .

[28]  Ryen Caenn,et al.  Drilling fluids : State of the art , 1996 .

[29]  Mortadha Alsaba,et al.  Application of In-House Prepared Nanoparticles as Filtration Control Additive to Reduce Formation Damage , 2014 .

[30]  Michael T. Wilson,et al.  Clay mineralogy and shale instability: an alternative conceptual analysis , 2014, Clay Minerals.

[31]  A. Baïri,et al.  3D natural convection on a horizontal and vertical thermally active plate in a closed cubical cavity , 2016 .

[32]  F. Growcock,et al.  Membrane Efficiency in Shale - An Empirical Evaluation of Drilling Fluid Chemistries and Implications for Fluid Design , 2002 .

[33]  Farough Agin,et al.  Application of decision tree, artificial neural networks, and adaptive neuro-fuzzy inference system on predicting lost circulation: A case study from Marun oil field , 2019, Journal of Petroleum Science and Engineering.

[34]  H. Oztop,et al.  An analysis on Free Convection Cooling of a 3×3 Heater Array in Rectangular Enclosure using Cu-EG-Water Nanofluid , 2016 .

[35]  M. Chenevert,et al.  Minimizing Water Invasion in Shales Using Nanoparticles , 2009 .

[36]  S. Akhtarmanesh,et al.  Improvement of wellbore stability in shale using nanoparticles , 2013 .

[37]  E. Oort,et al.  How Do Nanoparticles Stabilize Shale? , 2019, SPE Drilling & Completion.

[38]  Me Chenevert Me,et al.  Shale control with balanced- activity oil- continuous muds , 1970 .

[39]  Qinglin Wu,et al.  Water-based bentonite drilling fluids modified by novel biopolymer for minimizing fluid loss and formation damage , 2016 .

[40]  E. Oort.  On the physical and chemical stability of shales , 2003 .

[41]  C. H. Thuc,et al.  Synthesis of silica nanoparticles from Vietnamese rice husk by sol–gel method , 2013, Nanoscale Research Letters.

[42]  Ling Lin,et al.  Hyperbranched polyethylenimine modified with silane coupling agent as shale inhibitor for water-based drilling fluids , 2019, Journal of Petroleum Science and Engineering.

[43]  M. Moraveji,et al.  Bridging performance of new eco-friendly lost circulation materials , 2018, Petroleum Exploration and Development.

[44]  H. Zhong,et al.  Inhibiting shale hydration and dispersion with amine-terminated polyamidoamine dendrimers , 2016 .

[45]  Carl J. Thaemlitz,et al.  Functionalized Nanosilicas as Shale Inhibitors in Water-Based Drilling Fluids , 2017 .

[46]  Y. Leong,et al.  Stability and ageing behaviour and the formulation of potassium-based drilling muds , 2015 .

[47]  Evren Ozbayoglu,et al.  Frictional Pressure Loss Estimation of Non-Newtonian Fluids in Realistic Annulus With Pipe Rotation , 2009 .

[48]  R. Pode.  Potential applications of rice husk ash waste from rice husk biomass power plant , 2016 .

[49]  R. Gholami,et al.  A review on borehole instability in active shale formations: Interactions, mechanisms and inhibitors , 2018 .

[50]  Ahmed. A. Alsubaih.  Shale instability of deviated wellbores in southern Iraqi fields , 2016 .

[51]  M. Salavati‐Niasari,et al.  Ball milling synthesis of silica nanoparticle from rice husk ash for drug delivery application. , 2013, Combinatorial chemistry & high throughput screening.

[52]  Luyi Sun,et al.  Harvesting silica nanoparticles from rice husks , 2011 .

[54]  Ziad Abdullrahman Alabdullatif,et al.  Preliminary Test Results of Nano-based Drilling Fluids for Oil and Gas Field Application , 2011 .

[55]  Mohamed Khodja,et al.  Shale problems and water-based drilling fluid optimisation in the Hassi Messaoud Algerian oil field , 2010 .

[56]  Oscar M. Contreras,et al.  Wellbore Strengthening In Sandstones by Means of Nanoparticle-Based Drilling Fluids , 2014 .

[57]  Qinglin Wu,et al.  Cellulose nanoparticles as modifiers for rheology and fluid loss in bentonite water-based fluids. , 2015, ACS applied materials & interfaces.

[58]  H. D. Banerjee,et al.  Investigations on the production of silicon from rice husks by the magnesium method , 1982 .

[59]  Zhangxin Chen,et al.  Experimental study on the application of an ionic liquid as a shale inhibitor and inhibitive mechanism , 2017 .

[60]  I. Markovska,et al.  A Study on the thermal destruction of rice husk in air and nitrogen atmosphere , 2007 .

[61]  Tzong-Horng Liou.  Preparation and characterization of nano-structured silica from rice husk , 2004 .

[62]  R. Clark,et al.  Polyacrylamide/potassium-chloride mud for drilling water-sensitive shales , 1976 .

[63]  E. H. Malekshah,et al.  Lattice Boltzmann modeling of MHD free convection of nanofluid in a V-shaped microelectronic module , 2019, Thermal Science and Engineering Progress.

[64]  Fan Zhang,et al.  A novel film-forming silicone polymer as shale inhibitor for water-based drilling fluids , 2019, e-Polymers.

[65]  E. van Oort,et al.  Silicate-based drilling fluids : Competent, cost-effective and benign solutions to wellbore stability problems , 1996 .

[66]  Asphaltene precipitation modeling with PR and PC-SAFT equations of state based on normal alkanes titration data in a Multisolid approach , 2017, Fluid Phase Equilibria.

[67]  Gong-rang Li,et al.  Nanotechnology to Improve Sealing Ability of Drilling Fluids for Shale with Micro-cracks During Drilling , 2012 .

[68]  Steven Young,et al.  Wellbore Stability in Unconventional Shales - The Design of a Nano-Particle Fluid , 2012 .

[69]  Qinglin Wu,et al.  Cellulose Nanoparticles: Structure–Morphology–Rheology Relationships , 2015 .