The research of parallel-connected power conversion system based on power series decoupling

The energy storage system can operate in two modes, including grid-connected mode and islanding mode. The current sharing control of multiple parallel-connected energy storage subsystems is discussed in this paper. Firstly, the circuit configuration of parallel-connected energy storage system based on centralized control is introduced, and the equivalent model is established. Then the expressions of active and reactive circulating current in parallel system are deduced and analyzed. The result shows that the circulating current is related to the output voltage as well as parallel impedance, and can be suppressed by adjusting the output voltage. Moreover, considering the coupling between active and reactive circulation and the static error of impedance, a current sharing control strategy based on power series decoupling is proposed. The decoupling controller is designed and verified to have good robustness. The experimental results show that regardless of various loads, the proposed control method can not only maintain the stability of system voltage and frequency, but also has good static and dynamic current sharing accuracy.

[1]  Michael Z. Q. Chen,et al.  Centralized Control for Parallel Operation of Distributed Generation Inverters in Microgrids , 2012, IEEE Transactions on Smart Grid.

[2]  Shanxu Duan,et al.  Centralized control of parallel connected power conditioning system for battery energy storage system in charge-discharge-storage power station , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[3]  Alex Q. Huang,et al.  A 98.3% Efficient GaN Isolated Bidirectional DC–DC Converter for DC Microgrid Energy Storage System Applications , 2017, IEEE Transactions on Industrial Electronics.

[4]  Haijun Liu,et al.  Lyapunov-based control strategy for precise power sharing and voltage regulation of multi-inverter islanded micro-grids , 2017, 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe).

[5]  Shanxu Duan,et al.  Centralized control of large capacity parallel connected power conditioning system for battery energy storage system in microgrid , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[6]  Yu Zhang,et al.  Instantaneous Current-Sharing Control Strategy for Parallel Operation of UPS Modules Using Virtual Impedance , 2013, IEEE Transactions on Power Electronics.

[7]  Xiao Hu,et al.  A Novel Frequency and Voltage Control Method for Islanded Microgrid Based on Multienergy Storages , 2016, IEEE Transactions on Smart Grid.

[8]  Juan C. Vasquez,et al.  A Control Architecture to Coordinate Renewable Energy Sources and Energy Storage Systems in Islanded Microgrids , 2015, IEEE Transactions on Smart Grid.

[9]  Jinjun Liu,et al.  A Unified Virtual Power Decoupling Method for Droop-Controlled Parallel Inverters in Microgrids , 2016, IEEE Transactions on Power Electronics.

[10]  Yundong Ma,et al.  Simulation design of parallel inverters without interconnections based on improved PQ droop algorithm , 2015, 2015 IEEE 10th Conference on Industrial Electronics and Applications (ICIEA).

[11]  Josep M. Guerrero,et al.  Design and Analysis of the Droop Control Method for Parallel Inverters Considering the Impact of the Complex Impedance on the Power Sharing , 2011, IEEE Transactions on Industrial Electronics.

[12]  Bo Zhang,et al.  Control design and small-signal modeling of multi-parallel virtual synchronous generators , 2017, 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG).

[13]  Yuqing Zhu,et al.  Control analysis of inverter parallel system based on virtual synchronous generator , 2017, IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society.

[14]  M Bragard,et al.  The Balance of Renewable Sources and User Demands in Grids: Power Electronics for Modular Battery Energy Storage Systems , 2010, IEEE Transactions on Power Electronics.

[15]  Behrooz Mirafzal,et al.  A Method of Seamless Transitions Between Grid-Tied and Stand-Alone Modes of Operation for Utility-Interactive Three-Phase Inverters , 2014, IEEE Transactions on Industry Applications.