Elastic buckling of elliptical tubes

Hot-rolled and cold-formed structural steel tubular members of elliptical cross-section have recently been introduced into the construction sector. However, there is currently limited knowledge of their structural behaviour and stability, and comprehensive design guidance is not yet available. This paper examines the elastic buckling response of elliptical hollow sections in compression, which has been shown to be intermediate between that of circular hollow sections and flat plates. The transition between these two boundaries is dependant upon both the aspect ratio and relative thickness of the section. Based on the results of numerical and analytical studies, formulae to accurately predict the elastic buckling stress of elliptical tubes have been proposed, and shortcomings of existing expressions have been highlighted. Length effects have also been investigated. The findings have been employed to derive slenderness parameters in a system of cross-section classification for elliptical hollow sections, and form the basis for the development of effective section properties for slender elliptical tubes.

[1]  Joseph Kempner,et al.  BUCKLING AND POSTBUCKLING OF AN AXIALLY COMPRESSED OVAL CYLINDRICAL SHELL. , 1966 .

[2]  K. M. Liew,et al.  Buckling solutions for Mindlin plates of various shapes , 1994 .

[3]  M J Ryall,et al.  BRITANNIA BRIDGE: FROM CONCEPT TO CONSTRUCTION. , 1999 .

[4]  Y. N. Chen,et al.  Buckling of Clamped Oval Cylindrical Shells under Axial Loads , 1971 .

[5]  J. Kempner.  SOME RESULTS ON BUCKLING AND POSTBUCKLING OF CYLINDRICAL SHELLS , 1962 .

[6]  J. Kempner,et al.  Large deflections of an axially compressed oval cylindrical shell , 1966 .

[7]  J. M. Rotter,et al.  Buckling of thin metal shells , 2004 .

[8]  John Binding.  Brunel's Royal Albert Bridge: A study of the design and construction of his 'Gateway to Cornwall' at Saltash , 1997 .

[9]  Tak-Ming Chan,et al.  Compressive resistance of hot-rolled elliptical hollow sections , 2008 .

[10]  Viggo Tvergaard,et al.  Buckling of elastic-plastic oval cylindrical shells under axial compression , 1976 .

[11]  Tak-Ming Chan,et al.  Bending strength of hot-rolled elliptical hollow sections , 2008 .

[12]  G. Sun,et al.  Buckling and Initial Post-Buckling Behavior of Laminated Oval Cylindrical Shells Under Axial Compression , 1991 .

[13]  Karl Marguerre.  Stability of the cylindrical shell of variable curvature , 1951 .

[14]  R. C. Tennyson,et al.  Buckling of imperfect elliptical cylindrical shells under axial compression , 1971 .

[15]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[16]  A. R. Collins.  Structural Engineering: Two Centuries of British Achievement , 1983 .

[17]  Leroy Gardner.  Structural behaviour of oval hollow sections , 2005 .

[18]  P. S. Bulson,et al.  Background to buckling , 1980 .

[19]  D. Dawe,et al.  Buckling of rectangular mindlin plates , 1982 .

[20]  Tak-Ming Chan,et al.  Cross-section classification of elliptical hollow sections , 2007 .