Influence of shape fabric and crystal texture on marble degradation phenomena: simulations

Microstructure-based finite element simulations were used to study the influence of grain shape fabric and crystal texture on thermoelastic responses related to marble degradation phenomena. Calcite was used as an illustrative example for studying extremes of shape preferred orientation (SPO) in shape fabric and lattice preferred orientation (LPO) in crystal texture. Three SPOs were analyzed: equiaxed grains, elongated grains, and a mixture of equiaxed and elongated grains. Three LPOs were considered: a random orientation distribution function and two degrees of strong directional crystal texture. Finally, the correlation between the direction of the LPO with respect to that of the SPO was examined. Results show that certain combinations of SPO, LPO, and their directional relationship have significant influence on the thermomechanical behavior of marble. For instance, while there is no major dependence of the elastic strain energy density and the maximum principal stress on SPO for randomly textured microstructures, there is a strong synergy between LPO and its directional relationship with respect to the SPO direction. Microcracking precursors, elastic strain energy density, and maximum principal stress, decrease when the crystalline c-axes have fiber texture perpendicular to the SPO direction, but increase significantly when the c-axes have fiber texture parallel to the SPO direction. Moreover, the microstructural variability increases dramatically for these latter configurations. In general, the influence of LPO was as expected, namely, the strain energy density and the maximum principal stress decreased with more crystal texture, apart from for the exception noted above. Spatial variations of these precursors indicated regions in the microstructure with a propensity for microcracking. Unexpectedly, important variables were the microstructural standard deviations of the spatial distributions of the microcracking indicators. These microstructural standard deviations were as large as or larger than the variables themselves. The elastic misfit-strain contributions to the coefficients of thermal expansion were also calculated, but their dependence was as expected.

[1]  B. Atkinson.  Subcritical crack growth in geological materials , 1984 .

[2]  A. Koch,et al.  Marble bowing: comparative studies of three different public building facades , 2008 .

[3]  S. Clark,et al.  Handbook of physical constants , 1966 .

[4]  Rolf Snethlage,et al.  Stone in Architecture , 2011 .

[5]  Mark Miodownik,et al.  On boundary misorientation distribution functions and how to incorporate them into three-dimensional models of microstructural evolution , 1999 .

[6]  J. D. Sage.  Thermal microfracturing of marble , 1988 .

[7]  J. Bass.  Elasticity of Minerals, Glasses, and Melts , 2013 .

[8]  M. Atherton.  Igneous and Metamorphic Rocks under the Microscope , 1993 .

[9]  G. Koukis,et al.  Engineering geology of ancient works, monuments, and historical sites , 1990 .

[10]  S. Siegesmund,et al.  Thermal degradation of marble: indications from finite-element modelling , 2003 .

[11]  J. P. Henry,et al.  Experimental study of crack propagation in calcite rocks , 1977 .

[12]  Siegfried Siegesmund,et al.  Physical weathering of marbles caused by anisotropic thermal expansion , 2000 .

[13]  E. Fuller,et al.  Determination of Texture from Individual Grain Orientation Measurements , 2004 .

[14]  K. Chawla,et al.  Microstructure-based simulation of thermomechanical behavior of composite materials by object-oriented finite element analysis , 2002 .

[15]  A. Rollett,et al.  Statistically representative three-dimensional microstructures based on orthogonal observation sections , 2004 .

[16]  E. Fuller,et al.  Homology metrics for microstructure response fields in polycrystals , 2010 .

[17]  Siegfried Siegesmund,et al.  Physical and Mechanical Properties of Rocks , 2011 .

[18]  D. W. Kessler,et al.  Physical and chemical tests on the commercial marbles of the United States , 1919 .

[19]  K. Ullemeyer,et al.  Texture characterisation of carbonate rocks and some implications for the modeling of physical anisotropies, derived from idealized texture types , 1999 .

[20]  S. Siegesmund,et al.  Thermal expansion and its control on the durability of marbles , 2002, Geological Society, London, Special Publications.

[21]  A. Koch,et al.  The combined effect of moisture and temperature on the anomalous expansion behaviour of marble , 2004 .

[22]  Erhard M. Winkler,et al.  Stone in Architecture: Properties, Durability , 2013 .

[23]  E. Bechler,et al.  Pure shear and simple shear calcite textures. Comparison of experimental, theoretical and natural data , 1987 .

[24]  Stephen A. Langer,et al.  OOF: an image-based finite-element analysis of material microstructures , 2001, Comput. Sci. Eng..

[25]  D. Saylor,et al.  Thermal-elastic response of marble polycrystals: Influence of grain orientation configuration , 2007 .

[26]  W. A. Dollase,et al.  Correction of intensities for preferred orientation in powder diffractometry: application of the March model , 1986 .

[27]  F. Mango,et al.  High-sensitivity apparatus for measuring linear thermal expansion: Preliminary results on the response of marbles to thermal cycles , 1993 .

[28]  E. Fuller,et al.  Computer modelling of anisotropic grain microstructure in two dimensions , 1993 .

[29]  B. Leiss,et al.  ‘High-temperature’ texture in naturally deformed Carrara marble from the Alpi Apuane, Italy , 2003 .

[30]  J. M. Logan,et al.  A case study of the properties of marble as building veneer , 1993 .

[31]  H. Wenk,et al.  Calcite texture development in experimentally induced ductile shear zones , 1983 .

[32]  S. Siegesmund,et al.  Thermal tresses and microcracking in calcite and dolomite marbles via finite element modelling , 2002, Geological Society, London, Special Publications.