Dynamic insulation of the building envelope: Numerical modeling under transient conditions and coupling with nocturnal free cooling

Abstract Dynamic insulation consists of building envelope components that are air-permeable. Presently, the scientific literature provides various studies on the achievable performance of this technology during the heating season and in steady-state conditions, showing energetic benefits due to the reduction of the walls' thermal transmittance. Diversely, this paper investigates the behavior of dynamic insulation under transient conditions and is focused on the cooling season. In this study, a numerical model is proposed in order to evaluate the profiles of temperature and water vapor concentration, as well as the heat and vapor fluxes through air-permeable walls. This model is implemented in a home-made MATLAB® code, which adopts a finite difference method (FDM), and validated by comparison with: I) a simple case study from an authoritative literature reference; II) a CFD model run in COMSOL®, which adopts a finite element method (FEM). Then, the code is used to explore the benefits induced by dynamic insulation on nocturnal free cooling. For this purpose, nocturnal free cooling potential is investigated in two cases: a) under the hypothesis of dynamic building insulation (i.e., airflow crosses the walls) and b) under the hypothesis of static insulation (i.e., the envelope is not air-permeable). The study shows the advantages of air flowing through the walls. In particular, a reduction of the indoor temperature is verified. The analysis is performed for three geographical locations (Cairo, Naples and Munich), characterized by different climates, in order to assess how the achieved benefits vary depending on the latitude.

[1]  Mohammed S. Imbabi,et al.  Evaluation of thermal conductivity in air permeable concrete for dynamic breathing wall construction , 2007 .

[2]  Vincent Sambou,et al.  Theoretical and experimental study of heat transfer through a vertical partitioned enclosure: Application to the optimization of the thermal resistance , 2008 .

[3]  S. Lykoudis,et al.  Experimental work on a linked, dynamic and ventilated, wall component , 2004 .

[4]  Mohammed S. Imbabi,et al.  The building envelope as an air filter , 1998 .

[5]  Gerardo Maria Mauro,et al.  Experimental validation of a numerical code by thin film heat flux sensors for the resolution of thermal bridges in dynamic conditions , 2014 .

[6]  Esam Elsarrag,et al.  Modelling the thermal energy demand of a Passive-House in the Gulf Region: The impact of thermal insulation , 2012 .

[7]  Christina J. Hopfe,et al.  Transient thermal behaviour of crumb rubber-modified concrete and implications for thermal response and energy efficiency in buildings , 2012 .

[8]  Mohammed S. Imbabi,et al.  Modular breathing panels for energy efficient, healthy building construction , 2006 .

[9]  Catherine Langlais,et al.  What scope for ‘dynamic insulation’? , 1986 .

[10]  Nathan Mendes,et al.  Heat, air and moisture transfer through hollow porous blocks , 2009 .

[11]  Laura Bellia,et al.  Effects of solar shading devices on energy requirements of standalone office buildings for Italian climates , 2013 .

[12]  Guohui Gan,et al.  Numerical evaluation of thermal comfort in rooms with dynamic insulation , 2000 .

[13]  Giuseppe Peter Vanoli,et al.  Simplified state space representation for evaluating thermal bridges in building: Modelling, application and validation of a methodology , 2013 .

[14]  Mohammed S. Imbabi,et al.  Dynamic insulation in multistorey buildings , 1999 .

[15]  Bj Taylor,et al.  The application of dynamic insulation in buildings , 1998 .

[16]  Moncef Krarti.  Effect of Air Flow on Heat Transfer in Walls , 1994 .

[17]  Mohammed S. Imbabi,et al.  A passive–active dynamic insulation system for all climates , 2012 .

[18]  B. J. Taylor,et al.  Analytical investigation of the steady-state behaviour of dynamic and diffusive building envelopes , 1996 .

[19]  Nathan Mendes,et al.  Numerical analysis of passive cooling using a porous sandy roof , 2013 .

[20]  Riccardo Angiuli,et al.  Thermographic analysis of polyurethane foams integrated with phase change materials designed for dynamic thermal insulation in refrigerated transport , 2014 .

[21]  A. Bejan,et al.  Convection in Porous Media , 1992 .

[22]  M. D. Paepe,et al.  On coupling 1D non-isothermal heat and mass transfer in porous materials with a multizone building energy simulation model , 2010 .

[23]  Mohammed S. Imbabi,et al.  The effect of air film thermal resistance on the behaviour of dynamic insulation. , 1997 .

[24]  A. Öchsner,et al.  Cellular and Porous Materials : Thermal Properties Simulation and Prediction , 2008 .