Electrophoresis and orientation of multiple wall carbon nanotubes in polymer solution

This paper contains an in-depth analysis of the electrophoresis of multi-wall carbon nanotubes (MWNTs) in liquid epoxy where electrophoresis experiments under DC and AC fields were carried out for five different types of multi-wall carbon nanotubes (MWNTs). DC electrophoresis and particle image velocimetry were used to determine the electrophoretic particle mobility and zeta potential, where the MWNTs with the largest outer diameter and length led to the highest mobility values. The orientation and agglomeration of MWNTs into “striation” lines under AC electrophoresis were investigated by analysing the hue, saturation and intensity of the transmitted polarised light under microscope, following a schedule of step-wise applied voltage in the range of 0 to 100 V. Plots of hue and saturation as a function of the applied voltage were used to assess the degree of orientation and density of orientated MWNT structures, respectively, and to determine an optimum AC electric field value for the orientation of a specific MWNT type by electrophoresis.

[1]  Malcolm L. H. Green,et al.  Optical anisotropy of dispersed carbon nanotubes induced by an electric field , 1997 .

[2]  Christian A. Martin,et al.  Electric field-induced aligned multi-wall carbon nanotube networks in epoxy composites , 2005 .

[3]  Christian A. Martin,et al.  Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites , 2004 .

[4]  Hui-Ming Cheng,et al.  The fabrication of a carbon nanotube transparent conductive film by electrophoretic deposition and hot-pressing transfer , 2009, Nanotechnology.

[5]  Qing Wang,et al.  The effects of CNT alignment on electrical conductivity and mechanical properties of SWNT/epoxy nanocomposites , 2008 .

[6]  Wei Zhang,et al.  Alignment of multiwalled carbon nanotubes in bulk epoxy composites via electric field , 2009 .

[7]  F. Román,et al.  Vitrification, devitrification, and dielectric relaxations during the non‐isothermal curing of diepoxy‐cycloaliphatic diamine , 2006 .

[8]  M.-W. Wang,et al.  Alignment of MWCNTs in polymer composites by dielectrophoresis , 2008 .

[9]  Seiji Akita,et al.  RAPID COMMUNICATION: Orientation and purification of carbon nanotubes using ac electrophoresis , 1998 .

[10]  C. Lekakou,et al.  Processability studies of silica‐thermoset polymer matrix nanocomposites , 2008 .

[11]  M. Yumura,et al.  Polymer Composites of Carbon Nanotubes Aligned by a Magnetic Field , 2002 .

[12]  Z. Ounaies,et al.  Determination of the orientation distribution function in aligned single wall nanotube polymer nanocomposites by polarized Raman spectroscopy , 2008 .

[13]  E. Mendoza,et al.  In situ and real time determination of metallic and semiconducting single-walled carbon nanotubes in suspension via dielectrophoresis , 2006 .

[14]  R. Smalley,et al.  Neat macroscopic membranes of aligned carbon nanotubes , 2003 .

[15]  D. O’Carroll,et al.  Alignment and Dynamic Manipulation of Conjugated Polymer Nanowires in Nematic Liquid Crystal Hosts , 2008 .

[16]  Yoon Keun Kwak,et al.  Carbon nanotube samples prepared by an electric-field-assisted assembly method appropriate for the fabrication processes of tip-based nanodevices , 2008 .

[17]  L. Flandin,et al.  In situ observation of electric field induced agglomeration of carbon black in epoxy resin , 1998 .

[18]  Ji Liang,et al.  Macroscopic Networks of Carbon Nanotubes in PMMA Matrix Induced by AC Electric Field , 2008 .

[19]  M. Grimsditch,et al.  Advantages of ultraviolet Raman scattering for high temperature investigations , 1998 .