Moving Integration Filter-Based Open-Switch Fault-Diagnosis Method for Three-Phase Induction Motor Drive Systems

Reliable fault-diagnosis is essential to the induction motor drive systems in some special applications. In this article, we present a simple and robust fault-diagnosis scheme for three-phase induction motor drive systems. As the proposed fault-diagnosis method is based on the framework of model predictive control, many shared data can be fully utilized, and the computation burden is greatly reduced. To improve the robustness of fault detection, a moving integration filter-based residuals’ construction method is proposed, which reduces both the false alarms rate and the rate of missed detection. According to the order of the constructed residuals and the sign of current errors, it is easy to accomplish the task of fault isolation. Experimental results are presented to demonstrate the effectiveness of the proposed fault-diagnosis method.

[1]  Yantao Song,et al.  Survey on Reliability of Power Electronic Systems , 2013, IEEE Transactions on Power Electronics.

[2]  Mohamed Benbouzid,et al.  An improved fault-tolerant control scheme for PWM inverter-fed induction motor-based EVs. , 2013, ISA transactions.

[3]  Mohamed Trabelsi,et al.  PWM-switching pattern-based diagnosis scheme for single and multiple open-switch damages in VSI-fed induction motor drives. , 2012, ISA transactions.

[4]  D. Diallo,et al.  Fault detection and diagnosis in an induction Machine drive: a pattern recognition approach based on concordia stator mean current vector , 2005, IEEE Transactions on Energy Conversion.

[5]  Li Sun,et al.  Current Residual Vector-Based Open-Switch Fault Diagnosis of Inverters in PMSM Drive Systems , 2015, IEEE Transactions on Power Electronics.

[6]  Daniel U. Campos-Delgado,et al.  Fault-tolerant control in variable speed drives: a survey , 2008 .

[7]  Mei Su,et al.  Hybrid predictive control strategy for a low-cost converter-fed IM drive , 2018 .

[8]  Xinbo Chen,et al.  Motor/Generator Applications in Electrified Vehicle Chassis—A Survey , 2019, IEEE Transactions on Transportation Electrification.

[9]  Peter C. Müller,et al.  A simple improved velocity estimation for low-speed regions based on position measurements only , 2006, IEEE Transactions on Control Systems Technology.

[10]  A. J. Marques Cardoso,et al.  Voltage source inverter fault diagnosis in variable speed AC drives, by Park's vector approach , 1998 .

[11]  Imed Jlassi,et al.  A Robust Observer-Based Method for IGBTs and Current Sensors Fault Diagnosis in Voltage-Source Inverters of PMSM Drives , 2017, IEEE Transactions on Industry Applications.

[12]  Mario J. Duran,et al.  Open-Switch Fault Detection in Five-Phase Induction Motor Drives Using Model Predictive Control , 2018, IEEE Transactions on Industrial Electronics.

[13]  Antonio Marcus Nogueira Lima,et al.  Fault detection of open-switch damage in voltage-fed PWM motor drive systems , 2003 .

[14]  Annette Muetze,et al.  Enhanced and Fast Detection of Open-Switch Faults in Inverters for Electric Drives , 2017, IEEE Transactions on Industry Applications.

[15]  Hans-Peter Nee,et al.  A general algorithm for speed and position estimation of AC motors , 2000, IEEE Trans. Ind. Electron..

[16]  T.A. Lipo,et al.  Fault tolerant three-phase AC motor drive topologies: a comparison of features, cost, and limitations , 2003, IEEE Transactions on Power Electronics.

[17]  Ralph Kennel,et al.  Predictive control in power electronics and drives , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[18]  António J. Marques Cardoso,et al.  Open-Circuit Fault Diagnosis in PMSG Drives for Wind Turbine Applications , 2013, IEEE Transactions on Industrial Electronics.

[19]  Mei Su,et al.  Error-voltage based open-switch fault diagnosis strategy for matrix converters with model predictive control method , 2016, 2016 IEEE Energy Conversion Congress and Exposition (ECCE).

[20]  Marco Rivera,et al.  Model Predictive Control for Power Converters and Drives: Advances and Trends , 2017, IEEE Transactions on Industrial Electronics.

[21]  Leon M. Tolbert,et al.  Fault Diagnosis and Reconfiguration for Multilevel Inverter Drive Using AI-Based Techniques , 2007, IEEE Transactions on Industrial Electronics.

[22]  Antonio J. Marques Cardoso,et al.  A new approach for real-time multiple open-circuit fault diagnosis in voltage source inverters , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[23]  Shiyi Shao,et al.  Stator-Flux-Oriented Vector Control for Brushless Doubly Fed Induction Generator , 2009, IEEE Transactions on Industrial Electronics.

[24]  Cursino B. Jacobina,et al.  Single-phase ac–dc–ac topology for grid overvoltage and voltage harmonic mitigation , 2017 .

[25]  Janusz Nieznanski,et al.  Open-Transistor Fault Diagnostics in Voltage-Source Inverters by Analyzing the Load Currents , 2007, IEEE Transactions on Industrial Electronics.

[26]  Yi Tang,et al.  A Voltage-Based Open-Circuit Fault Detection and Isolation Approach for Modular Multilevel Converters With Model-Predictive Control , 2018, IEEE Transactions on Power Electronics.

[27]  Zhanshan Wang,et al.  A Diagnosis Algorithm for Multiple Open-Circuited Faults of Microgrid Inverters Based on Main Fault Component Analysis , 2018, IEEE Transactions on Energy Conversion.

[28]  António J. Marques Cardoso,et al.  A New Algorithm for Real-Time Multiple Open-Circuit Fault Diagnosis in Voltage-Fed PWM Motor Drives by the Reference Current Errors , 2013, IEEE Transactions on Industrial Electronics.

[29]  Bin Lu,et al.  A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters , 2008, 2008 IEEE Industry Applications Society Annual Meeting.

[30]  B. A. Welchko,et al.  Fault tolerant three-phase AC motor drive topologies; a comparison of features, cost, and limitations , 2003, IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03..