Polymer Electrolyte Blend Gate Dielectrics for High-Performance Ultrathin Organic Transistors: Toward Favorable Polymer Blend Miscibility and Reliability.

We report on systematic mobility enhancements in electrolyte-gated organic field-effect transistors (OFETs) by thinning down the active layer and exploiting polymer solid-state electrolyte gate insulators (SEGIs). The SEGI is composed of homogeneous poly(vinylidene fluoride- co-hexafluoropropylene) [P(VDF-HFP)] polymer solution-ion gel blends of high areal capacitance of >10 μF cm-2 at 1 Hz. By scaling up the poly(3-hexylthiophene) (P3HT) semiconducting layer by 1 order of magnitude (5-50 nm), an ultraviolet photoelectron spectroscopy examination reveals a downward vacuum-level shift generating a substantial hole injection barrier that originates from different interfacial dipole layer formations. The ultrathin (5.1 nm) P3HT FETs outperformed the other devices, exhibiting stable device characteristics with a highest field-effect mobility of >2 cm2 V-1 s-1 (effective mobility of 0.83 ± 0.05 cm2 V-1 s-1), on/off ratio of ∼106, low threshold voltage of <-0.6 V, and low gate-leakage current levels of ∼105 below the on-current levels in 10 μm channel length devices. We observed a positive threshold voltage shift in the P3HT/SEGI FETs with decreasing semiconductor thickness. The aforementioned mobility is at least 10 times greater than that of neat P(VDF-HFP) devices. The significant FET performance is attributed to a better insulator/semiconductor interface, efficient hole injection from the Au electrode resulting in a low contact resistance of <500 Ω  cm, and boosted charge-carrier densities in the transistor channel. This work demonstrates an excellent approach for carrier mobility enhancement and reliability assessment in low-voltage-operated electrolyte-gated OFETs.

[1]  Yong‐Young Noh,et al.  Recent Progress on High‐Capacitance Polymer Gate Dielectrics for Flexible Low‐Voltage Transistors , 2018, Advanced Functional Materials.

[2]  W. Wong,et al.  Energy level alignment of blended organic semiconductors and electrodes at the interface , 2018, Current Applied Physics.

[3]  Yong‐Young Noh,et al.  Difluorobenzothiadiazole and Selenophene-Based Conjugated Polymer Demonstrating an Effective Hole Mobility Exceeding 5 cm2 V-1 s-1 with Solid-State Electrolyte Dielectric. , 2018, ACS applied materials & interfaces.

[4]  Yang Han,et al.  Recent Progress in High‐Mobility Organic Transistors: A Reality Check , 2018, Advanced materials.

[5]  Lifeng Chi,et al.  High- k Gate Dielectrics for Emerging Flexible and Stretchable Electronics. , 2018, Chemical reviews.

[6]  Yong-Young Noh,et al.  Uniaxial Alignment of Conjugated Polymer Films for High‐Performance Organic Field‐Effect Transistors , 2018, Advanced materials.

[7]  Yong‐Young Noh,et al.  Effect of vacuum metalized gate electrode in top-gate solid-state electrolyte-gated organic transistors , 2018 .

[8]  Ian E. Jacobs,et al.  Controlling Molecular Doping in Organic Semiconductors , 2017, Advanced materials.

[9]  Wen‐Chang Chen,et al.  Stretchable Polymer Dielectrics for Low-Voltage-Driven Field-Effect Transistors. , 2017, ACS applied materials & interfaces.

[10]  M. Caironi,et al.  Ultrahigh Mobility in Solution‐Processed Solid‐State Electrolyte‐Gated Transistors , 2017, Advanced materials.

[11]  H. Sirringhaus,et al.  High operational and environmental stability of high-mobility conjugated polymer field-effect transistors through the use of molecular additives. , 2017, Nature materials.

[12]  Yong‐Young Noh,et al.  Planar‐Processed Polymer Transistors , 2016, Advanced materials.

[13]  H. Sirringhaus,et al.  Remarkable enhancement of charge carrier mobility of conjugated polymer field-effect transistors upon incorporating an ionic additive , 2016, Science Advances.

[14]  Zhihua Chen,et al.  Macroscopic and high-throughput printing of aligned nanostructured polymer semiconductors for MHz large-area electronics , 2015, Nature Communications.

[15]  Yong-Young Noh,et al.  Contact engineering in organic field-effect transistors , 2015 .

[16]  Myung‐Gil Kim,et al.  Gradual Controlling the Work Function of Metal Electrodes by Solution‐Processed Mixed Interlayers for Ambipolar Polymer Field‐Effect Transistors and Circuits , 2014 .

[17]  Wei Zhang,et al.  Aerosol-jet-printed, 1 volt H-bridge drive circuit on plastic with integrated electrochromic pixel. , 2013, ACS applied materials & interfaces.

[18]  C. Daniel Frisbie,et al.  Performance and stability of aerosol-jet-printed electrolyte-gated transistors based on poly(3-hexylthiophene). , 2013, ACS applied materials & interfaces.

[19]  Se Hyun Kim,et al.  Electrolyte‐Gated Transistors for Organic and Printed Electronics , 2013, Advanced materials.

[20]  T. Lodge,et al.  “Cut and Stick” Rubbery Ion Gels as High Capacitance Gate Dielectrics , 2012, Advanced materials.

[21]  K. Müllen,et al.  Microstructure evolution and device performance in solution-processed polymeric field-effect transistors: the key role of the first monolayer. , 2012, Journal of the American Chemical Society.

[22]  G. Ghibaudo,et al.  Power transfer-length method for full biasing contact resistance evaluation of organic field-effect transistors , 2011 .

[23]  Gerard Ghibaudo,et al.  Direct evaluation of low-field mobility and access resistance in pentacene field-effect transistors , 2010 .

[24]  Timothy P. Lodge,et al.  Ion Gel-Gated Polymer Thin-Film Transistors: Operating Mechanism and Characterization of Gate Dielectric Capacitance, Switching Speed, and Stability , 2009 .

[25]  U. Pietsch,et al.  Thickness Dependence of the Crystalline Structure and Hole Mobility in Thin Films of Low Molecular Weight Poly(3-hexylthiophene) , 2008 .

[26]  Y. Aoyagi,et al.  Charge injection process in organic field-effect transistors , 2007 .

[27]  Tobin J Marks,et al.  Low-voltage organic field-effect transistors and inverters enabled by ultrathin cross-linked polymers as gate dielectrics. , 2005, Journal of the American Chemical Society.

[28]  Henning Sirringhaus,et al.  Critical assessment of charge mobility extraction in FETs. , 2017, Nature materials.

[29]  Yong‐Young Noh,et al.  Large Enhancement of Carrier Transport in Solution‐Processed Field‐Effect Transistors by Fluorinated Dielectric Engineering , 2016, Advanced materials.

[30]  T. Shin,et al.  A Timely Synthetic Tailoring of Biaxially Extended Thienylenevinylene‐Like Polymers for Systematic Investigation on Field‐Effect Transistors , 2015 .