Control of hybrid AC/DC microgrid involving energy storage, renewable energy and pulsed loads

This paper proposes the coordinated control of a hybrid AC/DC power system with renewable energy source, energy storages and critical loads. The hybrid microgrid consists of both AC and DC sides. A synchronous generator and a PV farm supply power to the system's AC and DC sides, respectively. A bidirectional fully controlled AC/DC converter with active and reactive power decoupling technique is used to link the AC bus with the DC bus while regulating the system voltage and frequency. A DC/DC boost converter with a maximum power point tracking (MPPT) function is implemented to maximize the energy generation from the PV farm. Current controlled bidirectional DC/DC converters are applied to connect each lithium-ion battery bank to the DC bus. Lithium-ion battery banks act as energy storage devices that serve to increase the system stability by absorbing or injecting power to the grid as ancillary services. The proposed system can function in both grid-connected mode and islanding mode. Power electronic converters with different control strategies are analyzed in both modes in detail. Simulation results in MATLAB Simulink verify that the proposed topology is coordinated for power management in both AC and DC sides under critical loads with high efficiency, reliability, and robustness under both grid-connected and islanding modes.

[1]  Osama A. Mohammed,et al.  Optimal Charging of Plug-in Electric Vehicles for a Car-Park Infrastructure , 2014 .

[2]  Marc Keyser,et al.  Knowledge Is Power: Efficiently Integrating Wind Energy and Wind Forecasts , 2013, IEEE Power and Energy Magazine.

[3]  Charles Sao,et al.  Control and Power Management of Converter Fed Microgrids , 2008 .

[4]  Osama A. Mohammed,et al.  Reactive power compensation in hybrid AC/DC Networks for Smart Grid applications , 2012, 2012 3rd IEEE PES Innovative Smart Grid Technologies Europe (ISGT Europe).

[5]  S. Gonzalez,et al.  Development of a MATLAB/Simulink Model of a Single-Phase Grid-Connected Photovoltaic System , 2009, IEEE Transactions on Energy Conversion.

[6]  Osama A. Mohammed,et al.  Optimal charging of plug-in electric vehicles for a car park infrastructure , 2012, 2012 IEEE Industry Applications Society Annual Meeting.

[7]  Kara Clark,et al.  Emergency Response: U.S. System Frequency with High Wind Penetration , 2013, IEEE Power and Energy Magazine.

[8]  Osama Mohammed,et al.  Economic analysis of real-time large scale PEVs network power flow control algorithm with the consideration of V2G services , 2014, 2013 IEEE Industry Applications Society Annual Meeting.

[9]  Leon Roose,et al.  Catching Some Rays: Variable Generation Integration on the Island of Oahu , 2013, IEEE Power and Energy Magazine.

[10]  Osama A. Mohammed,et al.  Laboratory-Based Smart Power System, Part II: Control, Monitoring, and Protection , 2012, IEEE Transactions on Smart Grid.

[11]  Peng Wang,et al.  A Hybrid AC/DC Microgrid and Its Coordination Control , 2011, IEEE Transactions on Smart Grid.

[12]  M. Ceraolo,et al.  High fidelity electrical model with thermal dependence for characterization and simulation of high power lithium battery cells , 2012, 2012 IEEE International Electric Vehicle Conference.

[13]  Tan Ma,et al.  Operation and protection of photovoltaic systems in hybrid AC/DC smart grids , 2012, IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society.

[14]  R.H. Lasseter,et al.  Microgrid: a conceptual solution , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[15]  Shuang Gao,et al.  Opportunities and Challenges of Vehicle-to-Home, Vehicle-to-Vehicle, and Vehicle-to-Grid Technologies , 2013, Proceedings of the IEEE.

[16]  F. Baronti,et al.  Battery Management System: An Overview of Its Application in the Smart Grid and Electric Vehicles , 2013, IEEE Industrial Electronics Magazine.