Vibrations induced by high initial stress release during underground excavations

Abstract Excavation unloading under high initial stress is a typical dynamic process subjected to the combined effects of different factors. In this study, a mathematical physics method for a two-dimensional circular excavation was developed to investigate the mechanism involved in unloading vibration, which is capable of providing insights into the quantitative relationships between vibration features and correlative factors such as the initial stress, cross-sectional area of the tunnel, unloading rates and unloading paths. Then the dynamic unloading excavation process was implemented in the discrete element program PFC 2D for numerical analysis after verifications against the theoretical results. In particular, the characteristics of unloading waveform under high initial stress were investigated for various ratios of horizontal and vertical in situ stresses and aspect ratios of rectangular tunnels. The temporal and spatial characteristics of the excavation process can also be illustrated. In a practical project which considered the combined action of both the blast and unloading vibration, the finite difference program FLAC 3D was further adopted to investigate the contribution of unloading vibration to the character of the seismogram. Results are presented which indicate the 2D numerical analysis provides satisfactory approximation to the excavation process. While the peak particle velocity (PPV) is in direct proportion to the in situ stress variation, it decreases significantly along with the increase of unloading time. In addition, excavation by drill-and-blast (D&B) method should be taken as a dynamic process of blast loading before unloading in a period of time, instead of instantaneous unloading. Although unloading vibration can be generated and significant damage around the tunnel can be induced in the process, distinct unloading vibration can only be generated under high in situ stress and unloading rate.

[1]  Ming Cai,et al.  Influence of Unloading Rate on the Strainburst Characteristics of Beishan Granite Under True-Triaxial Unloading Conditions , 2014, Rock Mechanics and Rock Engineering.

[2]  Usama El Shamy,et al.  Discrete element method simulations of the seismic response of shallow foundations including soil‐foundation‐structure interaction , 2012 .

[3]  Joseph F Labuz,et al.  SIMULATION OF FAILURE AROUND A CIRCULAR OPENING IN ROCK , 2002 .

[4]  Thomas C. Bache,et al.  The effect of tectonic stress release on explosion P-wave signatures , 1976, Bulletin of the Seismological Society of America.

[5]  G. C. Werth,et al.  Comparison of amplitudes of seismic waves from nuclear explosions in four mediums , 1963 .

[6]  Xibing Li,et al.  Numerical Simulation of the Rock SHPB Test with a Special Shape Striker Based on the Discrete Element Method , 2014, Rock Mechanics and Rock Engineering.

[7]  Seokwon Jeon,et al.  A Numerical Study on the Screening of Blast-Induced Waves for Reducing Ground Vibration , 2009 .

[8]  M. Nafi Toksöz,et al.  Tectonic Strain Release by Underground Nuclear Explosions and its Effect on Seismic Discrimination , 1972 .

[9]  Ming Cai,et al.  Influence of stress path on tunnel excavation response – Numerical tool selection and modeling strategy , 2008 .

[10]  Jianchun Li,et al.  A case study on rock damage prediction and control method for underground tunnels subjected to adjacent excavation blasting , 2013 .

[11]  Julius Miklowitz,et al.  Plane-Stress Unloading Waves Emanating From a Suddenly Punched Hole in a Stretched Elastic Plate , 1960 .

[12]  A. G. Corkum,et al.  Modelling a mine-by test at the Mont Terri rock laboratory, Switzerland , 2007 .

[13]  J. Rutqvist,et al.  Characterizing Excavation Damaged Zone and Stability of Pressurized Lined Rock Caverns for Underground Compressed Air Energy Storage , 2013, Rock Mechanics and Rock Engineering.

[14]  Thorne Lay,et al.  Evidence of tectonic release in long-period S waves from underground nuclear explosions at the Novaya Zemlya test sites , 1986 .

[15]  A. Talbot.  The Accurate Numerical Inversion of Laplace Transforms , 1979 .

[16]  E. T. Brown,et al.  Rock Mechanics: For Underground Mining , 1985 .

[17]  Peng Yan,et al.  Microseism Induced by Transient Release of In Situ Stress During Deep Rock Mass Excavation by Blasting , 2013, Rock Mechanics and Rock Engineering.

[18]  John R. Murphy,et al.  Seismic characteristics of underground nuclear detonations Part I. Seismic spectrum scaling , 1971 .

[19]  Christopher J. Bean,et al.  Numerical simulation of seismic waves using a discrete particle scheme , 2000 .

[20]  Xibing Li,et al.  Influence of stress path on excavation unloading response , 2014 .

[21]  A. M. Cohen.  Numerical Methods for Laplace Transform Inversion , 2007 .

[22]  Jianhua Yang,et al.  Numerical Simulation of Rock Mass Damage Evolution During Deep-Buried Tunnel Excavation by Drill and Blast , 2015, Rock Mechanics and Rock Engineering.

[23]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[24]  Chuangbing Zhou,et al.  Contributions of In-Situ Stress Transient Redistribution to Blasting Excavation Damage Zone of Deep Tunnels , 2015, Rock Mechanics and Rock Engineering.

[25]  J. Lysmer,et al.  Finite Dynamic Model for Infinite Media , 1969 .

[26]  Ke Ma,et al.  Excavation-induced microseismicity: microseismic monitoring and numerical simulation , 2012 .

[27]  Y. Shin,et al.  Brittle Rock Property and Damage Index Assessment for Predicting Brittle Failure in Excavations , 2012, Rock Mechanics and Rock Engineering.

[28]  F. Press,et al.  Release of tectonic strain by underground nuclear explosions , 1962 .

[29]  P. K. Kaiser,et al.  Quantification of rock mass damage in underground excavations from microseismic event monitoring , 2001 .

[30]  M. A. Kayupov,et al.  Studies of the effect of dynamic processes during explosive break-out upon the roof of mining excavations , 1988 .

[31]  Mao Chen Ge,et al.  Efficient mine microseismic monitoring , 2005 .

[32]  M. He,et al.  Rock burst process of limestone and its acoustic emission characteristics under true-triaxial unloading conditions , 2010 .

[33]  Wancheng Zhu,et al.  2D numerical simulation on excavation damaged zone induced by dynamic stress redistribution , 2014 .

[34]  Peng Li,et al.  Comparison of vibrations induced by excavation of deep-buried cavern and open pit with method of bench blasting , 2011 .

[35]  T. Wallace.  Body Wave Observations of Tectonic Release , 2013 .

[36]  R. P. Young,et al.  Dynamic modelling of induced seismicity , 2004 .

[37]  Li-Li Wang,et al.  Foundations of Stress Waves , 2007 .

[38]  Jianhua Yang,et al.  An equivalent method for blasting vibration simulation , 2011, Simul. Model. Pract. Theory.

[39]  T. Moodie,et al.  Waves From Suddenly Punched Hole in Finitely Stretched Elastic Sheet , 1978 .

[40]  Peng Yan,et al.  Dynamic response of rock mass induced by the transient release of in-situ stress , 2012 .

[41]  R. S. Read,et al.  20 years of excavation response studies at AECL's Underground Research Laboratory , 2004 .

[42]  José V. Lemos,et al.  Micromechanical Modelling of Stress Waves in Rock and Rock Fractures , 2010 .

[43]  Xibing Li,et al.  Characteristics of the unloading process of rocks under high initial stress , 2012 .

[44]  John P. Carter,et al.  SUDDEN EXCAVATION OF A LONG CIRCULAR TUNNEL IN ELASTIC GROUND , 1990 .

[45]  J. B. Haddow,et al.  Waves from a Suddenly Punched Hole in an Elastic Sheet Subjected to Finite Simple Tension , 2003 .

[46]  T. Lay,et al.  The effects of tectonic release on short-period P waves from NTS explosions , 1984 .

[47]  D. L. Anderson,et al.  Earthquake Prediction: Variation of Seismic Velocities before the San Francisco Earthquake , 1973, Science.