Low power-consumption quantum cascade lasers

Quantum cascade lasers (QCLs) are promising light sources for real time high-sensitivity gas sensing in the mid-infrared region. For the practical use of QCLs as a compact and portable gas sensor, their power-consumption needs to be reduced. We report a successful operation of a low power-consumption distributed feedback (DFB) QCL. For the reduction of power consumption, we introduced a vertical-transition structure in a core region to improve carrier transition efficiency and reduced the core volume. DFB-QCL epitaxial structure was grown by low-pressure OMVPE. The core region consists of AlInAs/GaInAs superlattices lattice-matched to InP. A first-order Bragg-grating was formed near the core region to obtain a large coupling coefficiency. A mesa-strip was formed by reactive ion etching and a buried-heterostructure was fabricated by the regrowth of semi-insulating InP. High-reflective facet coatings were also performed to decrease the mirror loss for the reduction of the threshold current. A device (5x500μm) operated with a single mode in the wavelength region from 7.23μm to 7.27μm. The threshold current and threshold voltage under CW operation at 20 °C were 52mA and 8.4V respectively. A very low threshold power-consumption as low as 0.44 W was achieved, which is among the lowest values at room temperature to our knowledge.

[1]  Manijeh Razeghi,et al.  High-power continuous-wave operation of a 6 μm quantum-cascade laser at room temperature , 2003 .

[2]  Hiroyuki YOSHINAGA,et al.  Low Power Consumption ( < 1 W ) Mid-Infrared Quantum Cascade Laser for Gas Sensing , 2014 .

[3]  Hirofumi Kan,et al.  Room temperature, continuous-wave operation of quantum cascade lasers with single phonon resonance-continuum depopulation structures grown by metal organic vapor-phase epitaxy , 2007 .

[4]  Mattias Beck,et al.  Continuous Wave Operation of a Mid-Infrared Semiconductor Laser at Room Temperature , 2001, Science.

[5]  Manijeh Razeghi,et al.  Room temperature continuous wave operation of quantum cascade lasers with watt-level optical power , 2008 .

[6]  Federico Capasso,et al.  Room temperature continuous-wave operation of quantum-cascade lasers grown by metal organic vapour phase epitaxy , 2005 .

[7]  Carlo Sirtori,et al.  Distributed feedback quantum cascade lasers , 1997 .

[8]  Catherine Caneau,et al.  High-temperature continuous-wave operation of low power consumption single-mode distributed-feedback quantum-cascade lasers at λ∼5.2 μm , 2009 .

[9]  E. Gini,et al.  Mid-infrared quantum cascade lasers combs for spectroscopy , 2012, ISLC 2012 International Semiconductor Laser Conference.

[10]  Yargo Bonetti,et al.  Singlemode quantum cascade lasers with power dissipation below 1 W , 2012 .

[11]  J. Faist,et al.  The Quantum Cascade Laser , 1994 .

[12]  Yagi Hideki,et al.  Mid-IR vertical transition DFB quantum cascade laser , 2012 .

[13]  Yargo Bonetti,et al.  Room-temperature, continuous-wave, single-mode quantum-cascade lasers at λ≃5.4μm , 2005 .

[14]  Carlo Sirtori,et al.  VERTICAL TRANSITION QUANTUM CASCADE LASER WITH BRAGG CONFINED EXCITED STATE , 1995 .

[15]  Manijeh Razeghi,et al.  Very high average power at room temperature from λ≈5.9-μm quantum-cascade lasers , 2003 .

[16]  Makoto Murata,et al.  Low Power-Consumption Distributed Feedback Quantum Cascade Laser , 2014, 2014 International Semiconductor Laser Conference.

[17]  Manijeh Razeghi,et al.  High-power, room-temperature, and continuous-wave operation of distributed-feedback quantum-cascade lasers at λ∼4.8μm , 2005 .

[18]  Manijeh Razeghi,et al.  Room temperature continuous wave operation of quantum cascade lasers with 12.5% wall plug efficiency , 2008 .