Statistical design of polymeric composites reinforced with banana fibres and silica microparticles

The study describes a design of experiment analysis performed on hybrid polymeric composites reinforced with unidirectional banana fibres and silica microparticles. Maleic anhydride was also evaluated as a chemical additive to improve the adhesion between phases. A full factorial design (2231) and the analyses of variance were performed to identify the significance of the microstructure constituents against different mechanical and physical properties in a total population of 120 biocomposites samples. The microstructure parameters considered were fibre volume fraction (30% and 50%), silica addition (0%, 20 wt% and 33 wt%) and maleic anhydride addition (0% and 2 wt%). The mechanical and physical properties of the composite considered as factorial and analyses of variance responses were the apparent density, apparent porosity, water absorption, modulus of elasticity and mechanical strength under tensile and flexural loading. The design of experiment analysis has shown that the volume fraction of the fibres significantly affects all responses, with the composite made from 30% of banana fibres exhibiting superior mechanical strength and modulus of elasticity. While the addition of silica has featured a statistically noticeable contribution to the porosity and the water absorption, the presence of the particles did not provide any significant enhancement to the composites mechanical strength. Maleic anhydride showed a significant contribution to the apparent density, water absorption and flexural modulus, not improving the adhesion between phases, with a consequent decrease of the Young’s modulus and increase of the water absorption within the composites.

[1]  J. Tsai,et al.  Investigating Silica Nanoparticle Effect on Dynamic and Quasi-static Compressive Strengths of Glass Fiber/Epoxy Nanocomposites , 2009 .

[2]  J. E. Mark,et al.  Physical properties of polymers handbook , 2007 .

[3]  Abdullah Al Mamun,et al.  Abaca fibre reinforced PP composites and comparison with jute and flax fibre PP composites , 2007 .

[4]  Rosana Vilarim da Silva.  Compósito de resina poliuretano derivada de óleo de mamona e fibras vegetais , 2003 .

[5]  Cement - steatite composites reinforced with carbon fibres: an alternative for restoration of brazilian historical buildings , 2011 .

[6]  Satyendra Mishra,et al.  The compatibilising effect of maleic anhydride on swelling and mechanical properties of plant-fiber-reinforced novolac composites , 2000 .

[7]  Sabu Thomas,et al.  A review on interface modification and characterization of natural fiber reinforced plastic composites , 2001 .

[8]  M. Arroyo,et al.  Enhancement of mechanical properties and interfacial adhesion of PP/EPDM/flax fiber composites using maleic anhydride as a compatibilizer , 2003 .

[9]  Derrick Dean,et al.  S2-Glass/Epoxy Polymer Nanocomposites: Manufacturing, Structures, Thermal and Mechanical Properties , 2003 .

[10]  R. Oréfice,et al.  Porcelain tile surface modification with isocyanate coupling agent: interactions between EVA modified mortar and silane improving adherence , 2011 .

[11]  Arun K. Subramaniyan,et al.  Enhancing compressive strength of unidirectional polymeric composites using nanoclay , 2006 .

[12]  J. Jog,et al.  Natural fiber polymer composites: A review , 1999 .

[13]  Satyendra Mishra,et al.  Esterification effect of maleic anhydride on swelling properties of natural fiber/high density polyethylene composites , 2007 .

[14]  J. Lyons,et al.  Factors Affecting the Bond Between Polymer Composites and Wood , 2005 .

[15]  B. Kokta,et al.  Influence of polar monomers on the performance of wood fiber reinforced polystyrene composites. I: Evaluation of critical conditions , 1990 .

[16]  I. Daniel,et al.  Processing of clay/epoxy nanocomposites by shear mixing , 2003 .

[17]  N. Sombatsompop,et al.  Influence of Type and Concentration of Maleic Anhydride Grafted Polypropylene and Impact Modifiers on Mechanical Properties of PP/Wood Sawdust Composites , 2005 .

[18]  G. C. Martin.  Physical Properties of Polymers Handbook, 2nd ed Edited by James E. Mark (University of Cincinnati, OH). Springer Science + Business Media, LLC: New York. 2007. xx + 1076 pp. $349.00. ISBN 978-0-387-31235-4. , 2008 .

[19]  Fred Spiring,et al.  Introduction to Statistical Quality Control , 2007, Technometrics.

[20]  S. Mukhopadhyay,et al.  Variability of Tensile Properties of Fibers from Pseudostem of Banana Plant , 2009 .

[21]  Nilza G. Justiz-Smith,et al.  Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials , 2008 .

[22]  U. Yilmazer,et al.  Impact modified epoxy/montmorillonite nanocomposites: synthesis and characterization , 2003 .

[23]  L. Ye,et al.  A toughened epoxy resin by silica nanoparticle reinforcement , 2006 .

[24]  Karen A. F. Copeland.  Experiments: Planning, Analysis, and Parameter Design Optimization , 2002 .