Current-mode up-converting D/A-interface for mobile communication transmitter applications

A low voltage low power current-mode D/A interface with smoothing filter and upconversion mixer is presented. The D/A-converter is a binary weighted current-switching converter with 8-bit resolution. The uni-directional D/A-output currents are converted to bi-directional input currents for a differential current-mode 1 MHz low-pass filter by a common-mode feedforward circuit. The smoothing filter and current gain amplifier use high-gain current amplifiers using dynamically biased low distortion transconductance output stage. The filtered and amplified current is then fed to a current-switching mixer with off-chip loads. The filter operates with down to a 3 V supply voltage while the D/A-converter can operate even with 2.5 V supply. The harmonic distortion of the filter is typically lower than -50 dBc and thus more than 8-bit spurious free range can be achieved by oversampling.

[1]  Edgar Sánchez-Sinencio,et al.  3V high-frequency current-mode filters , 1993, 1993 IEEE International Symposium on Circuits and Systems.

[2]  K. W. Martin,et al.  A BiCMOS low-distortion 8-MHz low-pass filter , 1993 .

[3]  N. Tan,et al.  Low-voltage fully differential class-AB SI circuits with common-mode feedforward , 1994 .

[4]  Yannis Tsividis,et al.  Integrated continuous-time filter design , 1993, Proceedings of IEEE Custom Integrated Circuits Conference - CICC '93.

[5]  R. Castello,et al.  A 3V 12-55MHz BiCMOS Continuous-Time Filter with Pseudo-Differential Structure , 1995, ESSCIRC '95: Twenty-first European Solid-State Circuits Conference.

[6]  Yannis Tsividis,et al.  Integrated continuous-time filter design - an overview , 1994, IEEE J. Solid State Circuits.

[7]  Henk Termeer,et al.  A 10-b 40-MHz 0.8- mu m CMOS current-output D/A converter , 1991 .

[8]  David J. Allstot,et al.  CMOS continuous-time current-mode filters for high-frequency applications , 1993 .