A Multidisciplinary Strategy for the Inspection of Historical Metallic Tie-Rods: The Milan Cathedral Case Study

ABSTRACT A reliable assessment of historical metallic tie-rods requires both the estimation of actual tensile load and the identification of dominant defects. Despite high defectiveness resulting from traditional metalworking techniques, so far the latter aspect has not been duly addressed in the literature. In this article, several methodologies are discussed aimed at integrating the usual inspection practice. All studies were performed on the tie-rods of Milan Cathedral. Metallurgical analyses allowed to recognize the main features of the material. Mechanical characterization in the perspective of Elasto-Plastic Fracture Mechanics (EPFM) indicated the conditions for crack propagation. Several Non-Destructive Techniques (NDTs) commonly used in Mechanical Engineering (i.e., guided waves, eddy currents, pulsed active thermography) were examined and adapted to this unconventional application. Based on the combination of all the mentioned methods, a multidisciplinary procedure was defined, which allows the evaluation of the crack significance with reference to the estimated working stress.

[1]  R. F. Tylecote,et al.  A History of Metallurgy , 1976 .

[2]  Shi-Chang Wooh,et al.  Synthetic phase tuning of guided waves , 2001, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  Mira Vasic,et al.  A multidisciplinary approach for the structural assessment of historical constructions with tie-rods , 2015 .

[4]  Ch. Zhang,et al.  Dispersion curves of 2D rods with complex cross-sections: double orthogonal polynomial approach , 2015 .

[5]  E. Gdoutos,et al.  Fracture Mechanics , 2020, Encyclopedic Dictionary of Archaeology.

[6]  Shi-Chang Wooh,et al.  Synthetic phase tuning of guided waves. , 2001, IEEE transactions on ultrasonics, ferroelectrics, and frequency control.

[7]  X. Maldaguea,et al.  Advances in Pulsed Phase Thermography , 2001 .

[8]  Dario Coronelli,et al.  Cathedral of Milan: Structural History of the Load-Bearing System , 2015 .

[9]  Javier García-Martín,et al.  Non-Destructive Techniques Based on Eddy Current Testing , 2011, Sensors.

[10]  Chiara Calderini,et al.  Catene metalliche negli edifici storici in muratura. Primi risultati di una ricerca in corso , 2015 .

[11]  S. Imposimato,et al.  THE TIBURIO OF THE CATHEDRAL OF MILAN: STRUCTURAL ANALYSIS OF THE CONSTRUCTION & 20TH CENTURY FOUNDATION SETTLEMENTS , 2014 .

[12]  D. Ashkenazi,et al.  Archaeometallurgical Investigation of Iron Artifacts from Shipwrecks - A Review , 2012 .

[13]  Jacques Heyman,et al.  The Stone Skeleton by Jacques Heyman , 1995 .

[14]  Bo Liao,et al.  Influence of Post-Weld Heat Treatment on the Microstructure, Microhardness, and Toughness of a Weld Metal for Hot Bend , 2016 .

[15]  Craig C. Menzemer,et al.  Influence of Post Weld Heat Treatment on Strength of Three Aluminum Alloys Used in Light Poles , 2016 .

[16]  Yuh J. Chao,et al.  On the failure of cracks under mixed-mode loads , 1997 .

[17]  Dario Coronelli,et al.  Damage observation and settlement mechanisms in the naves of the Cathedral of Milan , 2016 .

[18]  Ulrich Amsel,et al.  Standard Guide For Preparation Of Metallographic Specimens , 2016 .

[19]  Nerio Tullini,et al.  Dynamic identification of beam axial loads using one flexural mode shape , 2008 .

[20]  Philippe Dillmann,et al.  Iron ? Which iron ? Methodologies for metallographic and slag inclusion studies applied to ferrous reinforcements from Auxerre Cathedral , 2013 .

[21]  Roberto Felicetti,et al.  Metallurgical and mechanical characterization of the historical tie-rod of Duomo di Milano , 2015 .

[22]  Philippe Dillmann,et al.  Slag inclusion analyses for studying ferrous alloys employed in French medieval buildings: supply of materials and diffusion of smelting processes , 2007 .

[23]  Xavier Maldague,et al.  Theory and Practice of Infrared Technology for Nondestructive Testing , 2001 .

[24]  Lukas Furst,et al.  The Stone Skeleton Structural Engineering Of Masonry Architecture , 2016 .

[25]  Carlo Poggi,et al.  A multidisciplinary approach for the assessment of great historical structures: Ties of “Duomo di Milano” , 2015 .

[26]  Roberto Felicetti,et al.  EDDY CURRENT NON-DESTRUCTIVE TESTING OF HISTORICAL METALLIC TIE-RODS , 2017 .

[27]  Sergio Lagomarsino,et al.  The dynamical identification of the tensile force in ancient tie-rods , 2005 .

[28]  S. B. Palmer,et al.  A review of “ ELECTRICAL AND MAGNETIC METHODS OF NONDESTRUCTIVE TESTING ” Jack Blitz Adam Hilger, Bristol, UK 1991 £ 45 , 1992 .