OFLID: Simple method of overlap factor calculation with laser intensity distribution for biaxial lidar

Abstract We proposed a simple overlap factor calculation method based on laser intensity distribution (OFLID), which is simple, practical and can be applied to any specific laser intensity distribution. In order to obtain the laser intensity distribution and parameters of our laser system, we designed a simple experiment to measure them, and then simulated an ideal Gaussian and uniform laser intensity distribution with the measured parameters. The OFLID calculation results indicated that the overlap factor of the measured distribution has approximately half the relative error of that of the ideal Gaussian distribution in the increasing range field for our lidar. Specifically, the laser intensity distribution should be regarded in the overlap correction of the lidar signal. Theoretically, the OFLID method can reduce the error caused by the hypothesis of ideal uniform or Gaussian intensity distributions in the analytical method. In addition, the method is easy to implement for overlap correction, signal simulation and system configuration optimization for biaxial lidar.

[1]  Benjamin M. Herman,et al.  Determination of aerosol height distributions by lidar , 1972 .

[2]  R. Measures.  Laser remote sensing : fundamentals and applications , 1984 .

[3]  A. Ansmann,et al.  Experimental determination of the lidar overlap profile with Raman lidar. , 2002, Applied optics.

[4]  Daniele Bortoli,et al.  Infrared lidar overlap function: an experimental determination. , 2010, Optics express.

[5]  Ihor Berezhnyy,et al.  A combined diffraction and geometrical optics approach for lidar overlap function computation , 2009 .

[6]  Tadeusz Stacewicz,et al.  Analytical function for lidar geometrical compression form-factor calculations. , 2005, Applied optics.

[7]  H. Kuze,et al.  Field-of-view dependence of lidar signals by use of Newtonian and Cassegrainian telescopes. , 1998, Applied optics.

[8]  H. Kong,et al.  Application of Geometrical Form Factor in Differential Absorption Lidar Measurement , 1997 .

[9]  Fan Yi,et al.  Methods for optical adjustment in lidar systems. , 2005, Applied optics.

[10]  N Spinelli,et al.  Analysis of the receiver response in lidar measurements. , 1998, Applied optics.

[11]  Li Wang,et al.  Accurate temperature profiling of the atmospheric boundary layer using an ultraviolet rotational Raman lidar , 2009 .

[12]  J Harms,et al.  Lidar return signals for coaxial and noncoaxial systems with central obstruction. , 1979, Applied optics.

[13]  H. Kong,et al.  Experimental determination of a geometric form factor in a lidar equation for an inhomogeneous atmosphere. , 1997, Applied optics.

[14]  K. Sassen,et al.  Lidar crossover function and misalignment effects. , 1982, Applied optics.

[15]  Vladimir A. Kovalev,et al.  Elastic Lidar: Theory, Practice, and Analysis Methods , 2004 .

[16]  K Tomine,et al.  Experimental determination of the crossover function in the laser radar equation for days with a light mist. , 1989, Applied optics.

[17]  W Lahmann,et al.  Geometrical compression of lidar return signals. , 1978, Applied optics.

[18]  J. Langerholc,et al.  Geometrical form factors for the lidar function. , 1978, Applied optics.

[19]  Aerosol scattering of supercontinuum radiation formed upon femtosecond laser pulse filamentation in the atmosphere , 2007 .

[20]  M. McCormick,et al.  Obtaining a ground-based lidar geometric form factor using coincident spaceborne lidar measurements. , 2010, Applied optics.