Effective control of ion fluxes over large areas by magnetic fields : from narrow beams to highly uniform fluxes

An effective control of the ion current distribution over large-area (up to 103 cm2) substrates with the magnetic fields of a complex structure by using two additional magnetic coils installed under the substrate exposed to vacuum arc plasmas is demonstrated. When the magnetic field generated by the additional coils is aligned with the direction of the magnetic field generated by the guiding and focusing coils of the vacuum arc source, a narrow ion density distribution with the maximum current density 117 A m−2 is achieved. When one of the additional coils is set to generate the magnetic field of the opposite direction, an area almost uniform over the substrate of 103 cm2 ion current distribution with the mean value of 45 A m−2 is achieved. Our findings suggest that the system with the vacuum arc source and two additional magnetic coils can be effectively used for the effective, high throughput, and highly controllable plasma processing.

[1]  Miran Mozetič,et al.  Behaviour of oxygen atoms near the surface of nanostructured Nb2O5 , 2007 .

[2]  André Anders,et al.  Ion flux from vacuum arc cathode spots in the absence and presence of a magnetic field , 2002 .

[3]  Igor Levchenko,et al.  Nanostructures of various dimensionalities from plasma and neutral fluxes , 2007 .

[4]  J. Khachan,et al.  Growth of carbon nanocone arrays on a metal catalyst: The effect of carbon flux ionization , 2008 .

[5]  M. Keidar,et al.  Modeling of a high-power thruster with anode layer , 2004 .

[6]  André Anders,et al.  Handbook of plasma immersion ion implantation and deposition , 2004 .

[7]  S. Goldsmith,et al.  Transport of a vacuum-arc produced plasma beam in a magnetized cylindrical duct , 2003 .

[8]  Kostya Ostrikov,et al.  Plasma-aided nanofabrication: where is the cutting edge? , 2007 .

[9]  Igor Levchenko,et al.  Deterministic shape control in plasma-aided nanotip assembly , 2006 .

[10]  Zhiqiang Chen,et al.  Spontaneous growth of superstructure alpha-Fe2O3 nanowire and nanobelt arrays in reactive oxygen plasma. , 2008, Small.

[11]  Michael Keidar,et al.  Investigation of a steady-state cylindrical magnetron discharge for plasma immersion treatment , 2003 .

[12]  Shuyan Xu,et al.  Nanopowder management and control of plasma parameters in electronegative SiH4 plasmas , 2003 .

[13]  Michael Keidar,et al.  On the conditions of carbon nanotube growth in the arc discharge , 2004 .

[14]  Michael Keidar,et al.  2D expansion of the low-density interelectrode vacuum arc plasma jet in an axial magnetic field , 1996 .

[15]  H. Sugai,et al.  Charging and trapping of macroparticles in near-electrode regions of fluorocarbon plasmas with negative ions , 2001 .

[16]  Osamu Ishihara,et al.  On the realization of the current-driven dust ion-acoustic instability , 1999 .

[17]  N. A. Azarenkov,et al.  Nonlinear effects of ionization on surface waves on a plasma-metal interface , 1998 .

[18]  Kostya Ostrikov,et al.  Colloquium: Reactive plasmas as a versatile nanofabrication tool , 2005 .

[19]  Oleg Baranov,et al.  Current Distribution on the Substrate in a Vacuum Arc Deposition Setup , 2008 .

[20]  I. R. Jones,et al.  Low-frequency, high-density, inductively coupled plasma sources: Operation and applications , 2001 .

[21]  Michael Keidar,et al.  Current-driven ignition of single-wall carbon nanotubes , 2006 .

[22]  Miran Mozetic,et al.  Nanowire sensor response to reactive gas environment , 2008 .

[23]  Davide Mariotti,et al.  The production of self-organized carbon connections between Ag nanoparticles using atmospheric microplasma synthesis , 2009 .

[24]  N. A. Azarenkov,et al.  A model of a large-area planar plasma producer based on surface wave propagation in a plasma-metal structure with a dielectric sheath , 1995 .