Free convection boundary layer flow over a horizontal cylinder of elliptic cross section in porous media saturated by a nanofluid

Abstract This work studies the free convection boundary layer flow over a horizontal cylinder of elliptic cross section in porous media saturated by a nanofluid with constant wall temperature and constant wall nanoparticle volume fraction. The effects of Brownian motion and thermophoresis are incorporated into the model for nanofluids. A coordinate transformation is performed, and the obtained nonsimilar governing equations are then solved by the cubic spline collocation method. The effects of the Brownian motion parameter and thermophoresis parameter on the profiles of the temperature, nanoparticle volume fraction and velocity profiles are presented. The local Nusselt number is presented as a function of the thermophoresis parameter, Brownian parameter, Lewis number and the aspect ratio when the major axis of the elliptical cylinder is vertical (slender orientation) and horizontal (blunt orientation). Results show that the local Nusselt number is increased as the thermophoresis parameter or the Brownian parameter is decreased. The local Nusselt number increases as the buoyancy ratio or the Lewis number is decreased. Moreover, the local Nusselt number of the elliptical cylinder with slender orientation is higher than those of the elliptical cylinder with blunt orientation over the lower half cylinder.

[1]  Ching-Yang Cheng.  Natural convection heat and mass transfer from a horizontal cylinder of elliptic cross section with constant wall temperature and concentration in saturated porous media , 2006 .

[2]  I. Pop,et al.  Free convection about cylinders of elliptic cross section embedded in a porous medium , 1992 .

[3]  Donald A. Nield,et al.  The Cheng–Minkowycz problem for natural convective boundary-layer flow in a porous medium saturated by a nanofluid , 2009 .

[4]  Sarit K. Das,et al.  Heat Transfer in Nanofluids—A Review , 2006 .

[5]  K. Yih.  Coupled heat and mass transfer by natural convection adjacent to a permeable horizontal cylinder in a saturated porous medium , 1999 .

[6]  Ali J. Chamkha,et al.  Natural Convective Boundary Layer Flow Over a Nonisothermal Vertical Plate Embedded in a Porous Medium Saturated With a Nanofluid , 2011 .

[7]  Ali J. Chamkha,et al.  Non-similar Solution for Natural Convective Boundary Layer Flow Over a Sphere Embedded in a Porous Medium Saturated with a Nanofluid , 2011 .

[8]  Ching-Yang Cheng.  A boundary layer analysis of heat transfer by free convection from permeable horizontal cylinders of elliptic cross-section in porous media using a thermal non-equilibrium model , 2007 .

[9]  I. Pop,et al.  Natural convection about two-dimensional bodies with uniform surface heat flux in a porous medium , 1987 .

[10]  J. H. Merkin,et al.  Free convection boundary layers on axi-symmetric and two-dimensional bodies of arbitrary shape in a saturated porous medium , 1979 .

[11]  I. Pop,et al.  Free Convection Boundary Layer Flow Past a Horizontal Flat Plate Embedded in a Porous Medium Filled With a Nanofluid , 2011 .

[12]  A. Solomon,et al.  Thermal Performance of cylindrical Heat Pipe Using Nanofluids , 2010 .

[13]  A. Yücel.  Natural convection heat and mass transfer along a vertical cylinder in a porous medium , 1990 .

[14]  R. A. Graves,et al.  Viscous flow solutions with a cubic spline approximation , 1975 .

[15]  R. Kahawita,et al.  Numerical integration of partial differential equations using cubic splines , 1983 .

[16]  Ioan Pop,et al.  Mixed convection boundary layer flow from a vertical flat plate embedded in a porous medium filled with nanofluids , 2010 .

[17]  J. Buongiorno.  Convective Transport in Nanofluids , 2006 .

[18]  R. Tiwari,et al.  HEAT TRANSFER AUGMENTATION IN A TWO-SIDED LID-DRIVEN DIFFERENTIALLY HEATED SQUARE CAVITY UTILIZING NANOFLUIDS , 2007 .

[19]  A. Kuznetsov,et al.  Thermal Instability in a Porous Medium Layer Saturated by a Nanofluid: Brinkman Model , 2010 .