Broadband DDC based on polyphase filter and its FPGA implementation

Digital Down Conversion (DDC) is one of the key technologies for software radio, which converts high frequency data streams into low frequency data streams for easy subsequent real-time processing by DSP devices. This paper presents a under the digital frequency conversion method based on polyphase filtering. Using Field Programmable Gate Array (FPGA) under the high speed digital frequency conversion was implemented, and introduced including Numerical Controlled Oscillator(NCO), frequency mixing module, CIC filter, HB filters, FIR filter, are discussed in detail. Meanwhile, use the software radio platform of my laboratory and the chipscope to collect data, and use the Matlab analyze the data, to verify the correctness and feasibility of the theoretical simulation.

[1]  Bo Yan,et al.  A 100MHz Digital Down Converter with modified FIR filter for wideband software-defined radios , 2010, 2010 International Conference on Electronics and Information Engineering.

[2]  M. Tomisawa,et al.  A Digital Intermediate Frequency Receiver for Inter-vehicle Communications , 2007, 2007 IEEE Intelligent Vehicles Symposium.

[3]  V. Vondra,et al.  Two-Channel Bioimpedance Monitor for Impedance Cardiography , 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

[4]  Sanjay Sharma,et al.  Design of Programmable Digital down Converter for Wimax , 2009 .

[5]  Kong Chao,et al.  Design and FPGA implementation of flexible and efficiency digital down converter , 2010, IEEE 10th INTERNATIONAL CONFERENCE ON SIGNAL PROCESSING PROCEEDINGS.

[6]  Markku Renfors,et al.  Cascade linear phase recursive half-band filters implement the most efficient digital down converter , 2012 .