Instrumented cardiac microphysiological devices via multi-material 3D printing

Biomedical research has relied on animal studies and conventional cell cultures for decades. Recently, microphysiological systems (MPS), also known as organs-on-chips, that recapitulate the structure and function of native tissues in vitro, have emerged as a promising alternative1. However, current MPS typically lack integrated sensors and their fabrication requires multi-step lithographic processes2. Here, we introduce a facile route for fabricating a new class of instrumented cardiac microphysiological devices via multi-material 3D printing. Specifically, we designed six functional inks, based on piezo-resistive, high conductance, and biocompatible soft materials that enable integration of soft strain gauge sensors within micro-architectures that guide the self-assembly of physio-mimetic laminar cardiac tissues. We validated that these embedded sensors provide non-invasive, electronic readout of tissue contractile stresses, inside cell incubator environments. We further applied these devices to study drug responses, as well as the contractile development of human stem cell derived laminar cardiac tissues over four weeks.

[1]  Jeong-Woo Choi,et al.  Phototactic guidance of a tissue-engineered soft-robotic ray , 2016, Science.

[2]  P. Hunter,et al.  Laminar structure of the heart: ventricular myocyte arrangement and connective tissue architecture in the dog. , 1995, The American journal of physiology.

[3]  Sean P Sheehy,et al.  Controlling the contractile strength of engineered cardiac muscle by hierarchal tissue architecture. , 2012, Biomaterials.

[4]  Yu Sun,et al.  Microfabricated perfusable cardiac biowire: a platform that mimics native cardiac bundle. , 2014, Lab on a chip.

[5]  Benjamin C. K. Tee,et al.  Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes. , 2011, Nature nanotechnology.

[6]  George A. Truskey,et al.  Modeling the mitochondrial cardiomyopathy of Barth syndrome with iPSC and heart-on-chip technologies , 2014, Nature Medicine.

[7]  C. Moravec,et al.  Human cardiac myosin heavy chain isoforms in fetal and failing adult atria and ventricles. , 2001, American journal of physiology. Heart and circulatory physiology.

[8]  Thomas Boudou,et al.  A microfabricated platform to measure and manipulate the mechanics of engineered cardiac microtissues. , 2012, Tissue engineering. Part A.

[9]  Kevin Kit Parker,et al.  Structural Phenotyping of Stem Cell-Derived Cardiomyocytes , 2015, Stem cell reports.

[10]  Takao Someya,et al.  Printable elastic conductors with a high conductivity for electronic textile applications , 2015, Nature Communications.

[11]  Kumaraswamy Nanthakumar,et al.  Biowire: a New Platform for Maturation of Human Pluripotent Stem Cell Derived Cardiomyocytes Pubmed Central Canada , 2022 .

[12]  S. Sheehy,et al.  Quality Metrics for Stem Cell-Derived Cardiac Myocytes , 2014, Stem cell reports.

[13]  Donald E Ingber,et al.  Control of lung vascular permeability and endotoxin-induced pulmonary oedema by changes in extracellular matrix mechanics , 2013, Nature Communications.

[14]  Gang Wang,et al.  Modeling the mitochondrial cardiomyopathy of Barth syndrome with iPSC and heart-on-chip technologies , 2014 .

[15]  Wei-Zhong Zhu,et al.  Structural and functional maturation of cardiomyocytes derived from human pluripotent stem cells. , 2013, Stem cells and development.

[16]  G. Whitesides,et al.  Muscular Thin Films for Building Actuators and Powering Devices , 2007, Science.

[17]  W. Zimmermann,et al.  Tissue Engineering of a Differentiated Cardiac Muscle Construct , 2002, Circulation research.

[18]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[19]  Thomas J Ober,et al.  Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks , 2015, Advanced materials.

[20]  Mark A. Skylar-Scott,et al.  Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.

[21]  Y. Rudy,et al.  Basic mechanisms of cardiac impulse propagation and associated arrhythmias. , 2004, Physiological reviews.

[22]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues , 2012 .

[23]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[24]  W. Zimmermann,et al.  Three-dimensional engineered heart tissue from neonatal rat cardiac myocytes. , 2000, Biotechnology and bioengineering.

[25]  Nenad Bursac,et al.  Tissue-engineered cardiac patch for advanced functional maturation of human ESC-derived cardiomyocytes. , 2013, Biomaterials.

[26]  Xuetao Sun,et al.  Biowire platform for maturation of human pluripotent stem cell-derived cardiomyocytes. , 2016, Methods.

[27]  Megan L. McCain,et al.  Ensembles of engineered cardiac tissues for physiological and pharmacological study: heart on a chip. , 2011, Lab on a chip.

[28]  D. Ingber,et al.  Microfluidic organs-on-chips , 2014, Nature Biotechnology.

[29]  David Beebe,et al.  Engineers are from PDMS-land, Biologists are from Polystyrenia. , 2012, Lab on a chip.

[30]  J. Procházka,et al.  Early postnatal development of contractile performance and responsiveness to Ca2+, verapamil and ryanodine in the isolated rat heart. , 1993, Journal of molecular and cellular cardiology.

[31]  Kevin Kit Parker,et al.  Micropatterning Alginate Substrates for In Vitro Cardiovascular Muscle on a Chip , 2013, Advanced functional materials.

[32]  George Church,et al.  Titin mutations in iPS cells define sarcomere insufficiency as a cause of dilated cardiomyopathy , 2015, Science.