Micro-tomography based analysis of thermal conductivity, diffusivity and oxidation behavior of rigid and flexible fibrous insulators

Abstract Material properties and oxidation behavior of low-density felts used as substrates for conformal carbon/phenolic ablators were compared with those of a rigid carbon fiber preform used to manufacture heritage lightweight ablators. Synchrotron X-ray micro-tomography measurements were performed to characterize the materials’ microstructure at the scale of the fibers. Using the tomography voxels as computational grids, tortuosity in the continuum regime, and room temperature conductivity were computed. Micro-scale simulations of the oxidation of carbon fibers were carried out using a random walk model for oxygen diffusion and a sticking probability law to model surface reactions. The study shows that, due to a higher porosity and lower connectivity, the felt materials have lower thermal conductivity but a faster recession rate than that of the rigid preform. Challenges associated with computations based on micro-tomography are also discussed.

[1]  N. Pan,et al.  Predictions of effective physical properties of complex multiphase materials , 2008 .

[2]  P. Cloetens,et al.  Permeability assessment by 3D interdendritic flow simulations on microtomography mappings of Al–Cu alloys , 2005 .

[3]  C. Noiriel.  Resolving Time-dependent Evolution of Pore-Scale Structure, Permeability and Reactivity using X-ray Microtomography , 2015 .

[4]  G. Vignoles,et al.  Benefits of X‐Ray CMT for the Modeling of C/C Composites , 2011 .

[5]  J. Hearle,et al.  Physical Properties of Textile Fibres , 1962 .

[6]  Thomas Scanlon,et al.  Permeability of Ablative Materials Under Rarefied Gas Conditions , 2016 .

[7]  Siu-Chun Lee,et al.  Radiative Properties of Fibrous Insulations: Theory Versus Experiment , 1995 .

[8]  Andreas Wiegmann,et al.  EJ-HEAT: A Fast Explicit Jump Harmonic Averaging Solver for the Effective Heat Conductivity of Composite Materials , 2006 .

[9]  Johannes E. Schindelin,et al.  Fiji: an open-source platform for biological-image analysis , 2012, Nature Methods.

[10]  Lucia Mancini,et al.  High resolution X-ray microtomography-based CFD simulation for the characterization of flow permeability and effective thermal conductivity of aluminum metal foams , 2015 .

[11]  Norman Epstein,et al.  On tortuosity and the tortuosity factor in flow and diffusion through porous media , 1989 .

[12]  M. Zafari,et al.  Microtomography-based numerical simulation of fluid flow and heat transfer in open cell metal foams , 2015 .

[13]  Theobald Fuchs,et al.  X-ray microtomography for materials characterization , 2016 .

[14]  Dean Kontinos,et al.  Post-Flight Evaluation of Stardust Sample Return Capsule Forebody Heatshield Material , 2008 .

[15]  D. Prabhu,et al.  Conformal Phenolic Impregnated Carbon Ablator Arcjet Testing, Ablation, and Thermal Response , 2015 .

[16]  E. Maire.  X-Ray Tomography Applied to the Characterization of Highly Porous Materials , 2012 .

[17]  F. Panerai,et al.  Quantitative determination of species production from phenol-formaldehyde resin pyrolysis , 2015 .

[18]  Nigel P. Brandon,et al.  TauFactor: An open-source application for calculating tortuosity factors from tomographic data , 2016, SoftwareX.

[19]  Nagi N. Mansour,et al.  Multiscale Approach to Ablation Modeling of Phenolic Impregnated Carbon Ablators , 2010 .

[20]  T KajiyaJames.  The rendering equation , 1986 .

[21]  G. Vignoles,et al.  Assessment of geometrical and transport properties of a fibrous C/C composite preform as digitized by x-ray computerized microtomography: Part II. Heat and gas transport properties , 2007 .

[22]  H. Tchelepi,et al.  The Impact of Sub-Resolution Porosity of X-ray Microtomography Images on the Permeability , 2016, Transport in Porous Media.

[23]  Manuel Dierick,et al.  Octopus, a fast and user-friendly tomographic reconstruction package developed in LabView® , 2004 .

[24]  Francesco Panerai,et al.  Modeling the oxidation of low-density carbon fiber material based on micro-tomography , 2016 .

[25]  P. Cloetens,et al.  X-ray micro-tomography an attractive characterisation technique in materials science , 2003 .

[26]  G. Vignoles,et al.  Thermographic and tomographic methods for tridimensional characterization of thermal transfer in silica/phenolic composites , 2016 .

[27]  K. Daryabeigi,et al.  Heat Transfer Modeling for Rigid High-Temperature Fibrous Insulation , 2013 .

[28]  A. Steinfeld,et al.  Tomography-Based Heat and Mass Transfer Characterization of Reticulate Porous Ceramics for High-Temperature Processing , 2010 .

[29]  N. Nouri,et al.  Three dimensional radiative heat transfer model for the evaluation of the anisotropic effective conductivity of fibrous materials , 2015 .

[30]  M. Williams,et al.  Microtomography-based numerical simulations of heat transfer and fluid flow through β-SiC open-cell foams for catalysis , 2016 .

[31]  H. Tran,et al.  Phenolic Impregnated Carbon Ablators (PICA) for Discovery class missions , 1996 .

[32]  S. Torquato,et al.  Random Heterogeneous Materials: Microstructure and Macroscopic Properties , 2005 .

[33]  Philippe Gouze,et al.  X-ray microtomography characterization of porosity, permeability and reactive surface changes during dissolution. , 2011, Journal of contaminant hydrology.

[34]  G. Vignoles.  A hybrid random walk method for the simulation of coupled conduction and linearized radiation transfer at local scale in porous media with opaque solid phases , 2016 .

[35]  Sophia Haussener,et al.  Tomography-based determination of permeability and Dupuit–Forchheimer coefficient of characteristic snow samples , 2011, Journal of Glaciology.

[36]  T. Magin,et al.  Development of Mutation++: Multicomponent Thermodynamic and Transport Properties for Ionized Plasmas written in C++ , 2014 .

[37]  Nicos Martys,et al.  Transport in sandstone: A study based on three dimensional microtomography , 1996 .

[38]  F. Panerai,et al.  Numerical and experimental analysis of spallation phenomena , 2016, CEAS Space Journal.

[39]  James T. Kajiya,et al.  The rendering equation , 1986, SIGGRAPH.

[40]  E. Landis,et al.  X-ray microtomography , 2010 .

[41]  T. Magin,et al.  Gibbs function continuation for linearly constrained multiphase equilibria , 2015 .

[42]  S. Morin,et al.  Numerical and experimental investigations of the effective thermal conductivity of snow , 2011 .

[43]  G. Vignoles,et al.  Numerical study of effective heat conductivities of foams by coupled conduction and radiation , 2016 .

[44]  Andrew Squelch,et al.  Improved estimates of percolation and anisotropic permeability from 3‐D X‐ray microtomography using stochastic analyses and visualization , 2009 .

[45]  S. Whitaker.  The method of volume averaging , 1998 .

[46]  Keith W. Jones,et al.  Synchrotron computed microtomography of porous media: Topology and transports. , 1994, Physical review letters.

[47]  P. Withers,et al.  Quantitative X-ray tomography , 2014 .

[48]  Francesco Panerai,et al.  High temperature permeability of fibrous materials using direct simulation Monte Carlo , 2017 .

[49]  Francesco Panerai,et al.  A New Approach To Light-Weight Ablators Analysis: From Micro-Tomography Measurements to Statistical Analysis and Modeling , 2013 .

[50]  S. Stock,et al.  X-ray micro-computed tomography and tortuosity calculations of percolating pore networks , 2014 .

[51]  Konrad Steiner,et al.  A multi-scale approach to material modeling of fuel cell diffusion media , 2011 .

[52]  A. Pfrang,et al.  X-ray Computed Tomography of Gas Diffusion Layers of PEM Fuel Cells - Calculation of Thermal Conductivity , 2010 .

[53]  W. Brent Lindquist,et al.  USE OF X-RAY COMPUTED MICROTOMOGRAPHY TO UNDERSTAND WHY GELS REDUCE RELATIVE PERMEABILITY TO WATER MORE THAN THAT TO OIL , 2003 .

[54]  G. Vignoles,et al.  Assessment of Geometrical and Transport Properties of a Fibrous C/C Composite Preform Using x-ray Computerized Micro-tomography: Part I. Image Acquisition and Geometrical Properties , 2005 .

[55]  Orestis Malaspinas,et al.  Synchrotron X-ray microtomography and lattice Boltzmann simulations of gas flow through volcanic pumices , 2010 .

[56]  Andreas Wiegmann,et al.  Estimation of the effective conductivities of complex cast iron microstructures using FIB-tomographic analysis , 2009 .

[57]  T. Walther,et al.  3D simulation of macroscopic heat and mass transfer properties from the microstructure of wood fibre networks , 2008 .

[58]  Michael Angelo B. Promentilla,et al.  Quantification of Tortuosity in Hardened Cement Pastes using Synchrotron-based X-ray Computed Microtomography , 2009 .

[59]  M. Stackpoole,et al.  Development of Advanced Conformal Ablative TPS Fabricated from Rayon- and PAN-Based Carbon Felts , 2016 .

[60]  Kaveh A. Tagavi,et al.  Evaluation of the anisotropic radiative conductivity of a low-density carbon fiber material from realistic microscale imaging , 2016 .

[61]  F. Panerai,et al.  Detailed analysis of species production from the pyrolysis of the Phenolic Impregnated Carbon Ablator , 2016 .

[62]  Salvatore Torquato,et al.  Modeling of physical properties of composite materials , 2000 .

[63]  R. Pailler,et al.  Thermal properties of carbon fibers at very high temperature , 2009 .

[64]  M. Y. Lee,et al.  MATERIAL CHARACTERIZATION OF SHUTTLE THERMAL PROTECTION SYSTEM FOR IMPACT ANALYSES , 2004 .

[65]  Eric Slimko,et al.  Mars Science Laboratory Heatshield Development, Implementation, and Lessons Learned , 2014 .

[66]  G. Vignoles,et al.  A Brownian motion technique to simulate gasification and its application to C/C composite ablation , 2009 .

[67]  A. A. MacDowell,et al.  X-ray micro-tomography at the Advanced Light Source , 2012, Optics & Photonics - Optical Engineering + Applications.

[68]  F. Panerai,et al.  Preliminary Numerical and Experimental Analysis of the Spallation Phenomenon , 2015 .

[69]  A. Steinfeld,et al.  Tomography-Based Determination of the Effective Thermal Conductivity of Fluid-Saturated Reticulate Porous Ceramics , 2008 .

[70]  A. Steinfeld,et al.  Tomographic Characterization of a Semitransparent-Particle Packed Bed and Determination of its Thermal Radiative Properties , 2009 .

[71]  Francesco Panerai,et al.  Experimental measurements of the permeability of fibrous carbon at high-temperature , 2016, 1603.04844.