1-D Electronic Beam-Steering Partially Reflective Surface Antenna

A 1-D electronic beam-steering partially reflective surface (PRS) antenna using a new reconfigurable PRS unit cell is proposed in this paper. The proposed work addresses the challenge to achieve a large beam steering angle with small gain variation and a small number of active/lumped elements by using a reconfigurable PRS superstrate only. The PRS unit cell consists of two back-to-back T-shaped strips with one PIN diode inserted between them and a pair of trapezoid patches (a rectangular patch and a pair of triangle parasitic patches). Beam steering is achieved by controlling the different states of PIN diodes. Thanks to the trapezoid patches, the proposed unit cell can generate a larger phase difference between different states, thereby leading to a larger beam steering angle. Furthermore, due to the addition of more degrees of freedom in the proposed unit cell, the phase difference can be easily manipulated. Moreover, since the T-shaped strips in each unit cell is connected with adjacent ones, the biasing network is very simple without needing a large number of lumped elements and dc biasing lines. The beam steering property is analyzed by using phased array theory. An antenna prototype with a main beam direction towards 0°, −18° and 18° operating at 5.5 GHz in the H-plane is fabricated and measured. Good agreement between the predicted simulation and measurement results for the input reflection coefficients and radiation patterns is achieved, which validates the feasibility of the design. The measured realized gains are over 11 dBi for all states with a 0.8 dBi gain variation.