Microstructure characterization of cold in-place recycled asphalt mixtures by X-ray computed tomography

Abstract This study investigated the microstructure features of cold in-place recycled (CIR) asphalt mixtures by the X-ray computed tomography (CT) and digital image processing (DIP) methods. A variety of CIR asphalt mixtures were prepared considering four types of aggregate gradation and three type of compaction method. The air void distribution characteristics of CIR specimens were analyzed based on the concept of air void gradation. A two-parameter Weibull function was used to fit the air void gradation, of which the statistical parameters are sensitive to both the aggregate gradation and compaction method. The concept of thickness spectrum was then developed to characterize the thickness distribution of cement asphalt (CA) mortar. Lognormal function was observed of good fitness of thickness spectrum. Finally, the uniformity index (UI) was built to evaluate the homogeneity of CIR mixtures and found the UIs of CIR mixture decreases gradually with the gradation from fine to coarse, and among the three compaction methods, the Superpave gyratory compaction is the best in terms of homogeneity. The findings of this study provide a solid foundation in exploring the internal structure and guiding the mix design of CIR mixtures.

[1]  Fujian Ni,et al.  Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomography , 2015 .

[2]  Meng Guo,et al.  Investigating the interaction between asphalt binder and fresh and simulated RAP aggregate , 2016 .

[3]  Zhong Qi Yue,et al.  APPLICATION OF DIGITAL IMAGE PROCESSING TO QUANTITATIVE STUDY OF ASPHALT CONCRETE MICROSTRUCTURE , 1995 .

[4]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .

[5]  Pedro Romero,et al.  Assessment of Fracture Parameters to Predict Field Cracking Performance of Cold In-Place Recycling Mixtures , 2010 .

[6]  Meng Guo,et al.  Effect of Freeze-Thaw Cycles on the Internal Structure and Performance of Semirigid Base Materials , 2017 .

[7]  Hussain U Bahia,et al.  Distribution of Strains Within Hot-Mix Asphalt Binders: Applying Imaging and Finite-Element Techniques , 2000 .

[8]  Yiqiu Tan,et al.  X-ray computed tomography in hydraulics of asphalt mixtures: Procedure, accuracy, and application , 2016 .

[9]  Susan L. Tighe,et al.  A novel method for evaluating hot mix asphalt fatigue damage: X-ray computed tomography , 2016 .

[10]  Charles T. Jahren,et al.  Long-Term Performance of Cold In-Place Recycled Asphalt Roads , 2005 .

[11]  E. Masad,et al.  Quantification of Damage in the Dynamic Complex Modulus and Flow Number Tests Using X-Ray Computed Tomography , 2011 .

[12]  Dennis A Morian,et al.  Experience with Cold In-Place Recycling as a Reflective Crack Control Technique: Twenty Years Later , 2004 .

[13]  Sanjeev Adhikari,et al.  Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images , 2009 .

[14]  Lei Gao,et al.  Three-dimensional fracture simulation of cold in-place recycling mixture using cohesive zone model , 2016 .

[15]  Thomas Harman,et al.  Quantifying Laboratory Compaction Effects on the Internal Structure of Asphalt Concrete , 1999 .

[16]  MoonKi Hoon,et al.  Microstructural analysis of asphalt mixtures using digital image processing techniques , 2014 .