Diagnostics Complex of the First Wall and Divertor of Tokamak with Reactor Technologies: Control of Erosion and Temperature and Monitoring of Fusion Fuel Build-up

[1]  A. Dmitriev,et al.  Laser-aided diagnostic of hydrogen isotope retention on the walls of the Globus-M2 tokamak , 2021, Fusion Engineering and Design.

[2]  J. Contributors,et al.  Comparison of JET inner wall erosion in the first three ITER-like wall campaigns , 2021, Nuclear Materials and Energy.

[3]  A. Stepanenko,et al.  Assessment of laser induced breakdown spectroscopy accuracy for determination of hydrogen accumulation in tungsten , 2021 .

[4]  T. Hatae,et al.  Expanded two-color thermography considering temperature-dependent emissivity of tungsten for ITER divertor infrared thermography , 2021, Fusion Engineering and Design.

[5]  C.J. Li,et al.  Detachment plasma achieved based on active temperature feedback system in EAST , 2020, Nuclear Fusion.

[6]  S. Brezinsek,et al.  First Monte‐Carlo modelling of global beryllium migration in ITER using ERO2.0 , 2019, Contributions to Plasma Physics.

[7]  S. Masuzaki,et al.  Analysis of mixed-material layers deposited on the toroidal array probes during the FY 2012 LHD plasma campaign , 2019, Fusion Engineering and Design.

[8]  F. Colao,et al.  Deuterium detection and quantification by laser-induced breakdown spectroscopy and calibration-free analysis in ITER relevant samples , 2019, Fusion Engineering and Design.

[9]  E. Hugot,et al.  Full coverage infrared thermography diagnostic for WEST machine protection , 2019, Fusion Engineering and Design.

[10]  Y. Corre,et al.  The very high spatial resolution infrared thermography on ITER-like tungsten monoblocks in WEST Tokamak , 2019, Fusion Engineering and Design.

[11]  V. Rozhansky,et al.  Physics basis for the first ITER tungsten divertor , 2019, Nuclear Materials and Energy.

[12]  T. Labutin,et al.  Stationary model of laser-induced plasma: Critical evaluation and applications , 2019, Spectrochimica Acta Part B: Atomic Spectroscopy.

[13]  G. Matthews,et al.  Investigation of deuterium trapping and release in the JET ITER-like wall divertor using TDS and TMAP , 2019, Nuclear Materials and Energy.

[14]  P. Gąsior,et al.  Detection by LIBS of the deuterium retained in the FTU toroidal limiter , 2019, Nuclear Materials and Energy.

[15]  R. Pitts,et al.  The influence of plasma-surface interaction on the performance of tungsten at the ITER divertor vertical targets , 2018 .

[16]  R. Elliman,et al.  Mechanical properties of tungsten following rhenium ion and helium plasma exposure , 2017 .

[17]  J. Contributors,et al.  Beryllium film deposition in cavity samples in remote areas of the JET divertor during the 2011–2012 ITER-like wall campaign , 2017 .

[18]  J. R. Martin-Solis,et al.  Study of Z scaling of runaway electron plateau final loss energy deposition into wall of DIII-D , 2017 .

[19]  T. Mertzimekis,et al.  Surface composition and structure of divertor tiles following the JET tokamak operation with the ITER-like wall , 2017 .

[20]  Liying Sun,et al.  Laser-induced breakdown spectroscopy to monitor ion cyclotron range of frequency wall cleaning Li/D co-deposition in EAST tokamak , 2017 .

[21]  J. Contributors,et al.  Erosion at the inner wall of JET during the discharge campaign 2013-2014 , 2017 .

[22]  Renkun Chen,et al.  Thermal conductivity reduction of tungsten plasma facing material due to helium plasma irradiation in PISCES using the improved 3-omega method , 2017 .

[23]  I. Mazul,et al.  In situ monitoring hydrogen isotope retention in ITER first wall , 2016 .

[24]  R. Neu,et al.  Development of laser induced breakdown spectroscopy for studying erosion, deposition, and fuel retention in ASDEX Upgrade , 2015 .

[25]  P. Andrew,et al.  RF discharge for in situ mirror surface recovery in ITER , 2015 .

[26]  J. Karhunen,et al.  Applicability of LIBS for in situ monitoring of deposition and retention on the ITER-like wall of JET - Comparison to SIMS , 2015 .

[27]  R. Neu,et al.  Erosion of tungsten and steel in the main chamber of ASDEX Upgrade , 2015 .

[28]  Jochen Linke,et al.  Research status and issues of tungsten plasma facing materials for ITER and beyond , 2014 .

[29]  S. Krat,et al.  Deuterium release from lithium–deuterium films, deposited in the magnetron discharge , 2014 .

[30]  B. Riccardi,et al.  Qualification and Post-Mortem Characterization of Tungsten Mock-ups Exposed to Cyclic High Heat Flux Loading , 2013 .

[31]  J. Contributors,et al.  Scaling of the tokamak near the scrape-off layer H-mode power width and implications for ITER , 2013 .

[32]  Salvatore Almaviva,et al.  Development of laser-based techniques for in situ characterization of the first wall in ITER and future fusion devices , 2013 .

[33]  J. Contributors,et al.  Erosion at the inner wall of JET during the discharge campaigns 2001–2009 , 2013 .

[34]  Jet Efda Contributors,et al.  Overview of erosion-deposition diagnostic tools for the ITER-Like Wall in the JET tokamak , 2013 .

[35]  B. Lipschultz,et al.  Divertor tungsten tile melting and its effect on core plasma performance , 2012 .

[36]  J. Linke,et al.  Tungsten and CFC degradation under combined high cycle transient and steady state heat loads , 2012 .

[37]  C. Grisolia,et al.  Development of laser lock-in thermography for plasma facing component surface characterisation , 2011 .

[38]  C. S. Pitcher,et al.  Defining the infrared systems for ITER. , 2010, The Review of scientific instruments.

[39]  Wataru Sakaguchi,et al.  Formation process of tungsten nanostructure by the exposure to helium plasma under fusion relevant plasma conditions , 2009 .

[40]  W. M. Clift,et al.  Be–W alloy formation in static and divertor-plasma simulator experiments , 2007 .

[41]  D. Guilhem,et al.  Tore-Supra infrared thermography system, a real steady-state diagnostic , 2005 .

[42]  M. Kempenaars,et al.  Laser desorption of deuterium retained in re-deposited carbon layers at TEXTOR and JET , 2005 .

[43]  M. Hasegawa,et al.  Global particle balance and wall recycling properties of long duration discharges on TRIAM-1M , 2004 .

[44]  R. Barry,et al.  Flaking of co-deposited hydrogenated carbon layers on the TFTR limiter , 1999 .