A Heat Transfer Analysis of the Fiber Placement Composite Manufacturing Process

A computer code is developed to accurately simulate the three-dimensional heat transfer during the thermoset fiber placement composite manufacturing process. The code is based on the Lagrangian formulation of the problem. Eight-node brick elements are employed, and the 2 × 2 × 2 integration rule is used to numerically evaluate the integrals over an element. The coupled ordinary differential equations obtained by the semidiscrete formulation of the problem are integrated by the unconditionally stable backward difference method. The code is validated by comparing the computed results for several problems with those available in the literature. Composite rings are manufactured by continuously laying a tape over a cylindrical mandrel and the temperature histories at several points are measured with thermocouples. The computed temperature distribution is found to compare well with the test findings. The code can be used to optimize the processing variables.

[1]  R. Batra,et al.  A Three-Dimensional Model of the Resin Film Infusion Process , 2002 .

[2]  W. Z. Black,et al.  Experimental Analysis and Process Window Development for Continuous Filament-Wound APC-2 , 1997 .

[3]  S. M. Grove,et al.  Thermal modelling of tape laying with continuous carbon fibre-reinforced thermoplastic , 1988 .

[4]  Fazil O. Sonmez,et al.  Modeling of Heat Transfer and Crystallization in Thermoplastic Composite Tape Placement Process , 1997 .

[5]  Susan C. Mantell,et al.  Manufacturing Process Models for Thermoplastic Composites , 1992 .

[6]  D. James,et al.  Thermal Analysis of Continuous Filament-Wound Composites , 1996 .

[7]  Ranga Pitchumani,et al.  Design and Optimization of a Thermoplastic Tow-Placement Process with In-Situ Consolidation , 1997 .

[8]  George S. Springer,et al.  Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin , 1982 .

[9]  S. Güçeri,et al.  Thermal Analysis of Laser-Assisted Thermoplastic-Matrix Composite Tape Consolidation , 1988 .

[10]  G. Springer,et al.  Thermochemical and Mechanical Aspects of Composite Tape Laying , 1995 .

[11]  S. Güçeri,et al.  Thermal Analysis of in-situ Thermoplastic Composite Tape Laying , 1991 .

[12]  P. Shih,et al.  Heat Transfer Analysis of the Thermoplastic Filament Winding Process , 1999, Proceedings of the Eighth Japan-U.S. Conference on Composite Materials.

[13]  M. G. Nejhad.  Issues Related to Processability during the Manufacture of Thermoplastic Composites Using On-Line Consolidation Techniques , 1993 .

[14]  M. N. Ghasemi Nejhad,et al.  Thermal Analysis of In-Situ Thermoplastic-Matrix Composite Filament Winding , 1991 .

[15]  A. Loos,et al.  Effects of Amine and Anhydride Curing Agents on the VARTM Matrix Processing Properties , 2002 .

[16]  C. C. Chamis,et al.  Simplified composite micromechanics equations for hygral, thermal and mechanical properties , 1983 .

[17]  G. Springer,et al.  Processing Thermoplastic Composites in a Press and by Tape Laying—Experimental Results , 1992 .

[18]  Po-Jen Shih,et al.  On-line consolidation of thermoplastic composites , 1997 .

[19]  Fazil O. Sonmez,et al.  Analysis of the On-Line Consolidation Process in Thermoplastic Composite Tape Placement , 1997 .