Light-Load Efficiency Optimization Method

In this paper, a method of maintaining high power-conversion efficiency across the entire load range and its circuit implementations are described. The proposed method substantially increases the conversion efficiency at light loads by minimizing switching and driving losses of semiconductor switches, as well as core losses of magnetic components. These losses are minimized by periodically turning off and on the power converter, and by controlling the converter so that when the converter is on, it operates at the power level that exhibits the maximum efficiency. The performance of the proposed method was evaluated on a 500-W, 400-V/12-V dc-dc converter and a 1-kW ac-dc boost power-factor-correction front-end.

[1]  Jiang Yi-lin.  Software Design of the Simulation System on the Starting Process of the Large Scale Aircraft , 2001 .

[2]  F.C. Lee,et al.  Design Challenges For Distributed Power Systems , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.

[3]  Young-seok Kim,et al.  The improved burst mode in the stand-by operation of power supply , 2004, Nineteenth Annual IEEE Applied Power Electronics Conference and Exposition, 2004. APEC '04..

[4]  Peng Xu,et al.  Topologies and design considerations for distributed power system applications , 2001, Proc. IEEE.

[5]  Hang-Seok Choi,et al.  Techniques to minimize Power Consumption of SMPS in Standby Mode , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.