Use of a load cell and force–moment curves to compare transverse plane moment loads on transtibial residual limbs: A preliminary investigation

Background and aim: The objective of this study was to demonstrate how a load cell and force–moment curves can be used outside of a gait lab to directly measure and evaluate the transverse plane loading moment on transtibial residual limbs. Technique: A load cell was attached distally to the socket of three transtibial amputees who walked a straight path and a circle of 3.048-m diameter with the prosthetic foot both inside and outside the curved path. Discussion: Compared to straight path walking, transverse plane moment decreased when the foot was on the outside of the curved path. When the foot was on the inside, the moment did not exceed that for straight path walking for two participants; maximum transverse moment was approximately 0.15 N m/kg of body mass. Force–moment curves indicated that each participant’s gait was unique, but underlying similarities were observed with respect to each of the three conditions. Clinical relevance A load cell in conjunction with curved and straight path walking and force–moment curves can be used outside of a gait lab to measure and examine the transverse plane loading on the residual limb.

[1]  W D Spence,et al.  A methodology for studying the effects of various types of prosthetic feet on the biomechanics of trans-femoral amputee gait. , 1999, Journal of biomechanics.

[2]  R Dumas,et al.  Loading applied on prosthetic knee of transfemoral amputee: comparison of inverse dynamics and direct measurements. , 2009, Gait & posture.

[3]  Michael S Orendurff,et al.  Local dynamic stability of amputees wearing a torsion adapter compared to a rigid adapter during straight-line and turning gait. , 2010, Journal of biomechanics.

[4]  Clayton J Adam,et al.  FE stress analysis of the interface between the bone and an osseointegrated implant for amputees--implications to refine the rehabilitation program. , 2008, Clinical biomechanics.

[5]  Kerstin Hagberg,et al.  Kinetics of transfemoral amputees with osseointegrated fixation performing common activities of daily living. , 2007, Clinical biomechanics.

[6]  G K Klute,et al.  Comparison of human turning gait with the mechanical performance of lower limb prosthetic transverse rotation adapters , 2005, Prosthetics and orthotics international.

[7]  D A Winter,et al.  Performance assessment of the Terry Fox jogging prosthesis for above-knee amputees. , 1989, Journal of biomechanics.

[8]  Ming Zhang,et al.  Perception of socket alignment perturbations in amputees with transtibial prostheses. , 2012, Journal of rehabilitation research and development.

[9]  Laurent Frossard,et al.  Dynamic input to determine hip joint moments, power and work on the prosthetic limb of transfemoral amputees: ground reaction vs knee reaction , 2011, Prosthetics and orthotics international.

[10]  Kartheek Yalamanchili,et al.  Transducer-based comparisons of the prosthetic feet used by transtibial amputees for different walking activities: a pilot study , 2012, Prosthetics and orthotics international.

[11]  Dudley S. Childress,et al.  Problems associated with the use of inverse dynamics in prosthetic applications: An example using a polycentric prosthetic knee , 2005, Robotica.

[12]  Martin Twiste,et al.  Transverse rotation and longitudinal translation during prosthetic gait--a literature review. , 2003, Journal of rehabilitation research and development.

[13]  Rickard Brånemark,et al.  Load on Osseointegrated Fixation of a Transfemoral Amputee During a Fall: Loading, Descent, Impact and Recovery Analysis , 2010, Prosthetics and orthotics international.

[14]  Steven Gray,et al.  Magnitude and variability of loading on the osseointegrated implant of transfemoral amputees during walking. , 2008, Medical engineering & physics.

[15]  Ming Zhang,et al.  Effect of transtibial prosthesis alignment changes on out-of-plane socket reaction moments during walking in amputees. , 2012, Journal of biomechanics.

[16]  Edward S. Neumann,et al.  Use of a Load Cell and Force-Moment Analysis to Examine Transtibial Prosthesis Foot Rollover Kinetics for Anterior-Posterior Alignment Perturbations , 2012 .

[17]  Paul Stephenson,et al.  Estimation of forces at the interface between an artificial limb and an implant directly fixed into the femur in above-knee amputees , 2002, Journal of orthopaedic science : official journal of the Japanese Orthopaedic Association.

[18]  A. S. Levens,et al.  Transverse rotation of the segments of the lower extremity in locomotion. , 1948, The Journal of bone and joint surgery. American volume.

[20]  Laurent Frossard,et al.  Apparatus for monitoring load bearing rehabilitation exercises of a transfemoral amputee fitted with an osseointegrated fixation: a proof-of-concept study. , 2010, Gait & posture.

[21]  Jason A. Schoen,et al.  Comparison of transtibial amputee and non-amputee biomechanics during a common turning task. , 2011, Gait & posture.

[22]  Laurent Frossard,et al.  Functional Outcome of Transfemoral Amputees Fitted With an Osseointegrated Fixation: Temporal Gait Characteristics , 2010 .

[23]  M. Orendurff,et al.  Influence of malalignment on socket reaction moments during gait in amputees with transtibial prostheses. , 2013, Gait & posture.

[24]  John H. Evans,et al.  Development and preliminary testing of a device for the direct measurement of forces and moments in the prosthetic limb of transfemoral amputees during activities of daily living , 2003 .

[25]  Nicolas Vuillerme,et al.  Biomechanics and physiological parameters during gait in lower-limb amputees: a systematic review. , 2011, Gait & posture.

[26]  Michael S Orendurff,et al.  Transtibial amputee joint rotation moments during straight-line walking and a common turning task with and without a torsion adapter. , 2009, Journal of rehabilitation research and development.