Figure-of-Merit Enhancement for Laterally Vibrating Lithium Niobate MEMS Resonators

This paper reports on figure-of-merit (FoM) enhancement techniques for a new class of lithium niobate (LN)-based microelectromechanical systems laterally vibrating resonators (LVRs). A weighted electrode configuration is used to experimentally demonstrate a more than 2× enhancement for the device electromechanical coupling kt2, and an optimized reactive ion etch is used to attain straighter LN sidewalls and subsequently a 3× improvement in quality factor (Q=1300). As a result, the resonators orientated 30 ° to +y in the x-cut plane exhibited a kt2 of 21.7%, and a quality factor of 1300, effectively corresponding to an FoM of 280-the highest demonstrated to date for LVRs. These devices are expected to provide an unprecedented and unmatched platform for frequency-agile and adaptive RF filtering technology.

[1]  G. Piazza,et al.  Weighted electrode configuration for electromechanical coupling enhancement in a new class of micromachined Lithium Niobate laterally vibrating resonators , 2012, 2012 International Electron Devices Meeting.

[2]  F. Ayazi,et al.  Thin-film piezoelectric-on-silicon resonators for high-frequency reference oscillator applications , 2008, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  Songbin Gong,et al.  Design and Analysis of Lithium–Niobate-Based High Electromechanical Coupling RF-MEMS Resonators for Wideband Filtering , 2013, IEEE Transactions on Microwave Theory and Techniques.

[4]  S. Gevorgian,et al.  CAD models for multilayered substrate interdigital capacitors , 1996 .

[5]  Songbin Gong,et al.  GHz High-$Q$ Lateral Overmoded Bulk Acoustic-Wave Resonators Using Epitaxial SiC Thin Film , 2012, Journal of Microelectromechanical Systems.

[6]  Gianluca Piazza,et al.  High electromechanical coupling MEMS resonators at 530 MHz using ion sliced X-cut LiNbO3 thin film , 2012, 2012 IEEE/MTT-S International Microwave Symposium Digest.

[7]  Clark T.-C. Nguyen,et al.  Capacitive-piezoelectric AlN resonators with Q>12,000 , 2011, 2011 IEEE 24th International Conference on Micro Electro Mechanical Systems.

[8]  J. Larson,et al.  Ultra-miniature high-Q filters and duplexers using FBAR technology , 2001, 2001 IEEE International Solid-State Circuits Conference. Digest of Technical Papers. ISSCC (Cat. No.01CH37177).

[9]  G. Piazza,et al.  Multi-frequency wideband RF filters using high electromechanical coupling laterally vibrating lithium niobate MEMS resonators , 2013, 2013 IEEE 26th International Conference on Micro Electro Mechanical Systems (MEMS).

[10]  Chengjie Zuo,et al.  Super-high-frequency two-port AlN contour-mode resonators for RF applications , 2010, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[11]  M. Kadota,et al.  High Q SAW resonator using upper-electrodes on grooved-electrodes in LiTaO3 , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[12]  S. Benchabane,et al.  Highly selective electroplated nickel mask for lithium niobate dry etching , 2009 .

[13]  A. Pisano,et al.  Piezoelectric Aluminum Nitride Vibrating Contour-Mode MEMS Resonators , 2006, Journal of Microelectromechanical Systems.

[14]  Albert P. Pisano,et al.  Thermally compensated aluminum nitride Lamb wave resonators for high temperature applications , 2010 .