Mock-Up Study of the Effect of Wall Distance on the Thermal Rating of Power Cables in Ventilated Tunnels

Power transmission through power cables installed in ventilated tunnels is increasingly used worldwide and offers a complex thermal environment. Established correlations currently in use have been deduced from a nonfully developed turbulent flow and the effect of the proximity to a tunnel wall is not accounted for. This paper details the experimental and numerical investigations conducted on a mock-up of the heat transfer from a single cable in a fully developed turbulent airflow, with emphasis on the effect of the cable spacing from the tunnel wall. Nusselt numbers have been compared for different spacing and Reynolds numbers. The overall heat transfer is found to be meaningfully lower than in previous studies as only a third of the heat transfer is found, possible explanation of these differences are given in this paper. A threshold value is observed for the heat transfer while the cable rating depreciation is more gradual. The radiative heat exchange is found to be up to 30% of the total heat loss. An improved cooling law for the case of a single cable in tunnel taking into account the proximity of the wall has been developed from this study and confronted to the experimental and simulated data.

[1]  M. H. McGrath,et al.  The calculation of the temperature rise and load capability of cable systems , 1957, Transactions of the American Institute of Electrical Engineers. Part III: Power Apparatus and Systems.

[2]  B. M. Weedy,et al.  The Current Carrying Capacity of Power Cables in Tunnels , 1973 .

[3]  B. Blackwell,et al.  Comparison of some inverse heat conduction methods using experimental data , 1996 .

[4]  George J. Anders.  Rating of cables on riser poles, in trays, in tunnels and shafts-a review , 1996 .

[5]  Bernard Desmet,et al.  Influence of Flow Velocity and Fin Spacing on the Forced Convective Heat Transfer from an Annular-Finned Tube. , 1999 .

[6]  Hrvoje Jasak,et al.  In-Cylinder CFD Simulation Using a C++ Object-Oriented Toolkit , 2004 .

[7]  George J. Anders,et al.  Rating of Electric Power Cables in Unfavorable Thermal Environment , 2005 .

[8]  M. Matsumura,et al.  Transmission capacity design of underground power cables installed in deep tunnel , 2006, 2006 IEEE Power Engineering Society General Meeting.

[9]  Dominique Derome,et al.  CFD calculation of convective heat transfer coefficients and validation – Part I: Laminar flow , 2006 .

[10]  G. Wübbeler,et al.  Evaluation of measurement uncertainty and its numerical calculation by a Monte Carlo method , 2008 .

[11]  J. Thiffeault,et al.  Heat Transfer in Underground Rail Tunnels , 2007, 0709.1748.

[12]  G.J. Anders,et al.  Ampacity Calculations for Deeply Installed Cables , 2010, IEEE Transactions on Power Delivery.

[13]  David Payne,et al.  Rating Independent Cable Circuits in Forced-Ventilated Cable Tunnels , 2010, IEEE Transactions on Power Delivery.

[14]  G J Anders,et al.  Ampacity Calculations for Cables in Shallow Troughs , 2010, IEEE Transactions on Power Delivery.

[15]  E. Dorison.  CURRENT RATING OF CABLES INSTALLED IN DEEP OR VENTI LATED TUNNELS , 2012 .

[16]  F. Beaubert,et al.  A thermal study of power cables cooling in tunnels , 2016 .