Polymer Gels Used in Oil–Gas Drilling and Production Engineering

Polymer gels are widely used in oil–gas drilling and production engineering for the purposes of conformance control, water shutoff, fracturing, lost circulation control, etc. Here, the progress in research on three kinds of polymer gels, including the in situ crosslinked polymer gel, the pre-crosslinked polymer gel and the physically crosslinked polymer gel, are systematically reviewed in terms of the gel compositions, crosslinking principles and properties. Moreover, the advantages and disadvantages of the three kinds of polymer gels are also comparatively discussed. The types, characteristics and action mechanisms of the polymer gels used in oil-gas drilling and production engineering are systematically analyzed. Depending on the crosslinking mechanism, in situ crosslinked polymer gels can be divided into free-radical-based monomer crosslinked gels, ionic-bond-based metal cross-linked gels and covalent-bond-based organic crosslinked gels. Surface crosslinked polymer gels are divided into two types based on their size and gel particle preparation method, including pre-crosslinked gel particles and polymer gel microspheres. Physically crosslinked polymer gels are mainly divided into hydrogen-bonded gels, hydrophobic association gels and electrostatic interaction gels depending on the application conditions of the oil–gas drilling and production engineering processes. In the field of oil–gas drilling engineering, the polymer gels are mainly used as drilling fluids, plugging agents and lost circulation materials, and polymer gels are an important material that are utilized for profile control, water shutoff, chemical flooding and fracturing. Finally, the research potential of polymer gels in oil–gas drilling and production engineering is proposed. The temperature resistance, salinity resistance, gelation strength and environmental friendliness of polymer gels should be further improved in order to meet the future technical requirements of oil–gas drilling and production.

[1]  Keke Zhi,et al.  Degradable preformed particle gel as temporary plugging agent for low-temperature unconventional petroleum reservoirs: Effect of molecular weight of the cross-linking agent , 2022, Petroleum Science.

[2]  Bo Liao,et al.  Molecular Simulation of Interactions between High-Molecular-Polymer Flocculation Gel for Oil-Based Drilling Fluid and Clay Minerals , 2022, Gels.

[3]  Yingrui Bai,et al.  Review of the application of environmentally responsive gels in drilling and oil recovery engineering: Synthetic materials, mechanism, and application prospect , 2022, Journal of Petroleum Science and Engineering.

[4]  Jingbing Yang,et al.  Status and Prospect of Drilling Fluid Loss and Lost Circulation Control Technology in Fractured Formation , 2022, Gels.

[5]  Jingbing Yang,et al.  Experimental Study on Physicochemical Properties of a Shear Thixotropic Polymer Gel for Lost Circulation Control , 2022, Gels.

[6]  Hongbin Yang,et al.  Study on preparation and plugging effect of sawdust gel particle in fractured reservoir , 2022, Journal of Petroleum Science and Engineering.

[7]  Saswati Roy,et al.  Amino acid-based polymeric gel network and its application in different fields , 2022, Journal of the Indian Chemical Society.

[8]  Yujun Feng,et al.  In situ crosslinked weak gels with ultralong and tunable gelation times for improving oil recovery , 2021, Chemical Engineering Journal.

[9]  P. Thareja,et al.  Hydrogels differentiated by length scales: A review of biopolymer-based hydrogel preparation methods, characterization techniques, and targeted applications , 2021, European Polymer Journal.

[10]  R. Moreno,et al.  Optimization of an in-situ polymerized and crosslinked hydrogel formulation for lost circulation control , 2021, Journal of Petroleum Science and Engineering.

[11]  Mingzhen Wei,et al.  A comprehensive review of in-situ polymer gel simulation for conformance control , 2021, Petroleum Science.

[12]  Weian Huang,et al.  Synthesis and characterization of high-temperature self-crosslinking polymer latexes and their application in water-based drilling fluid , 2021 .

[13]  Peiyi Wu,et al.  Underwater Communication and Optical Camouflage Ionogels , 2021, Advanced materials.

[14]  S. Salehi,et al.  Gelation kinetics of PAM/PEI based drilling mud for lost circulation applications , 2021 .

[15]  M. S. Kamal,et al.  Synergistic effect of polymer and nanoparticles on shale hydration and swelling performance of drilling fluids , 2021 .

[16]  Jian Sun,et al.  Facile synthesis of self-healing and layered sodium alginate/polyacrylamide hydrogel promoted by dynamic hydrogen bond. , 2021, Carbohydrate polymers.

[17]  J. Gautrot,et al.  Comparative adhesion of chemically and physically crosslinked poly(acrylic acid)-based hydrogels to soft tissues , 2021 .

[18]  Hongbin Yang,et al.  Progress of polymer gels for conformance control in oilfield. , 2021, Advances in colloid and interface science.

[19]  B. Bai,et al.  Ultra-high temperature resistant preformed particle gels for enhanced oil recovery , 2021 .

[20]  Xiangfeng Zhang,et al.  Conformance control mechanism of low elastic polymer microspheres in porous medium , 2021 .

[21]  Chunxue Cui,et al.  Enhance oil recovery in low permeability reservoirs: Optimization and evaluation of ultra-high molecular weight HPAM / phenolic weak gel system , 2020, Journal of Petroleum Science and Engineering.

[22]  Cheng Wang,et al.  Investigation of a high temperature gel system for application in saline oil and gas reservoirs for profile modification , 2020, Journal of Petroleum Science and Engineering.

[23]  A. Hashemi,et al.  Study on the optimization of the performance of preformed particle gel (PPG) on the isolation of high permeable zone , 2020 .

[24]  Qianhui Wu,et al.  Identification and characterization of a proper gel system for large-volume conformance control treatments in a fractured tight reservoir: From lab to field , 2020 .

[25]  Renxian Sun,et al.  Development of degradable pre-formed particle gel (DPPG) as temporary plugging agent for petroleum drilling and production , 2020, Petroleum Science.

[26]  Shiling Zhang,et al.  Polyacrylamide gel formed by Cr(III) and phenolic resin for water control in high-temperature reservoirs , 2020 .

[27]  N. Zhang,et al.  Field design guidelines for gel strengths of profile-control gel treatments based on reservoir type , 2020 .

[28]  N. Sun,et al.  Chromatography and oil displacement mechanism of a dispersed particle gel strengthened Alkali/Surfactant/Polymer combination flooding system for enhanced oil recovery , 2020 .

[29]  Hongbin Yang,et al.  Preparation and properties of an acid-resistant preformed particle gel for conformance control , 2020 .

[30]  V. Taghikhani,et al.  Rheological properties and the micromodel investigation of nanosilica gel-reinforced preformed particle gels developed for improved oil recovery , 2020 .

[31]  B. Bai,et al.  Development of Swelling-Rate Controllable Particle Gels to Control the Conformance of CO2 Flooding , 2020 .

[32]  Hongbin Yang,et al.  The advances of organic chromium based polymer gels and their application in improved oil recovery. , 2020, Advances in colloid and interface science.

[33]  Cheng Wang,et al.  Experimental study of polyacrylamide polymer gel for profile controlling in high-temperature offshore reservoirs , 2020 .

[34]  Jintao Zhu,et al.  Engineering the morphology of hydrogen-bonded comb-shaped supramolecular polymers: from solution self-assembly to confined assembly , 2020 .

[35]  Quan Zhou,et al.  Preparation and Experimental Study of a Low-Initial-Viscosity Gel Plugging Agent , 2020, ACS omega.

[36]  Fanzhou Zeng,et al.  The research of new type gel plugging agent for deep well , 2020, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[37]  K. Lv,et al.  The Synthesis of Polymeric Nanospheres and the Application as High-Temperature Nano-Plugging Agent in Water Based Drilling Fluid , 2020, Frontiers in Chemistry.

[38]  B. Newland,et al.  Complex polymer architectures through free-radical polymerization of multivinyl monomers , 2020, Nature Reviews Chemistry.

[39]  Kun Xie,et al.  Starch graft copolymer and polymer gel applied in Bohai oilfield for water plugging and profile control and their mechanisms , 2020 .

[40]  Liming Zheng,et al.  Effect of stress relaxation and creep recovery on transportation in porous medium and fracture of the millimeter-scale polymer gel particles for conformance control of heterogeneous oil reservoir , 2020 .

[41]  Sanxi Li,et al.  Nanocomposite gel of high-strength and degradability for temporary plugging in ultralow-pressure fracture reservoirs , 2020 .

[42]  Ping Liu,et al.  Plugging mechanisms of polymer gel used for hydraulic fracture water shutoff , 2020 .

[43]  X. Yue,et al.  Migration and plugging mechanisms of self-aggregated microspheres as a novel profile control , 2020 .

[44]  Changyou Shao,et al.  An integrated self-healable and robust conductive hydrogel for dynamically self-adhesive and highly conformable electronic skin , 2019, Journal of Materials Chemistry C.

[45]  Hongbin Yang,et al.  Experimental research on amphiphilic polymer/organic chromium gel for high salinity reservoirs , 2019 .

[46]  Hongbin Yang,et al.  Shear resistance performance of low elastic polymer microspheres used for conformance control treatment , 2019, Journal of Industrial and Engineering Chemistry.

[47]  Hongbin Yang,et al.  The New Development of Amphiphilic Polymer Profile Control Agent in High Temperature and High Salinity Reservoirs , 2019, Day 3 Wed, November 13, 2019.

[48]  Guoxing Sun,et al.  Tough physical hydrogels reinforced by hydrophobic association with remarkable mechanical property, rapid stimuli-responsiveness and fast self-recovery capability , 2019, European Polymer Journal.

[49]  Abdulmohsin Imqam,et al.  The potential of using micro-sized crosslinked polymer gel to remediate water leakage in cement sheaths , 2019, Journal of Petroleum Exploration and Production Technology.

[50]  H. Li,et al.  Morphology and Rheological Properties of Polyacrylamide/Bentonite Organic Crosslinking Composite Gel , 2019, Energies.

[51]  S. Salehi,et al.  Polymeric formulations used for loss circulation materials and wellbore strengthening applications in oil and gas wells: A review , 2019, Journal of Petroleum Science and Engineering.

[52]  Dai-jun Du,et al.  Experimental study of secondary crosslinking core-shell hyperbranched associative polymer gel and its profile control performance in low-temperature fractured conglomerate reservoir , 2019, Journal of Petroleum Science and Engineering.

[53]  C. Pu,et al.  Mechanism of formation of chromium acetate(Cr3+)/ phenol-formaldehyde resin prepolymer(PRP) complex and its compound cross-linking reaction with polymer for conformance control , 2019, Journal of Petroleum Science and Engineering.

[54]  Xiaona Cui,et al.  Study on Profile Control and Water Shut‐Off Performance of Interpenetrating Network Polymer Gel Composite System in Shallow Low Temperature Fractured Oil Layer , 2019, ChemistrySelect.

[55]  Ahmadreza Ghaffarkhah,et al.  Effect of silica nanoparticle size on the mechanical strength and wellbore plugging performance of SPAM/chromium (III) acetate nanocomposite gels , 2019, Polymer Journal.

[56]  B. Bai,et al.  Experimental Evaluation of Oxidizing Breakers for a Polyacrylamide-Based Re-Crosslinkable Preformed Particle Gel , 2019, Energy & Fuels.

[57]  Xiuyan Ren,et al.  Hydrophobic association hydrogels with excellent mechanical and self-healing properties , 2019, European Polymer Journal.

[58]  C. Pu,et al.  A New Method of Plugging the Fracture to Enhance Oil Production for Fractured Oil Reservoir using Gel Particles and the HPAM/Cr3+ System , 2019, Polymers.

[59]  F. Esmaeilzadeh,et al.  Experimental investigation of asphaltene-augmented gel polymer performance for water shut-off and enhancing oil recovery in fractured oil reservoirs , 2019, Journal of Molecular Liquids.

[60]  Yigang Liu,et al.  Effect of profile-control oil-displacement agent on increasing oil recovery and its mechanism , 2019, Fuel.

[61]  C. Pu,et al.  Influence of salinity on the properties of the different HPAM/Al3+systems , 2019, Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles.

[62]  Chengxin Hu,et al.  Preparation of high strength double physically cross-linked hydrogels by immersion method—How to avoid uneven soaking , 2018, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[63]  B. M. Jan,et al.  In situ organically cross-linked polymer gel for high-temperature reservoir conformance control: A review , 2018, Polymers for Advanced Technologies.

[64]  Caili Dai,et al.  Study on rheology and microstructure of phenolic resin cross-linked nonionic polyacrylamide (NPAM) gel for profile control and water shutoff treatments , 2018, Journal of Petroleum Science and Engineering.

[65]  M. Moraveji,et al.  Synthesis, structure and mechanical properties of nanocomposites based on exfoliated nano magnesium silicate crystal and poly(acrylamide) , 2018, Journal of Dispersion Science and Technology.

[66]  Yong Sun,et al.  Experimental study of acrylamide monomer polymer gel for water plugging in low temperature and high salinity reservoir , 2018, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[67]  L. Ambrosio,et al.  Macroporous alginate foams crosslinked with strontium for bone tissue engineering. , 2018, Carbohydrate polymers.

[68]  M. Alsaba,et al.  Application of Nanoparticles in Improving Rheological Properties of Water Based Drilling Fluids , 2018 .

[69]  Xiaosen Shang,et al.  Experimental study of low molecular weight polymer/nanoparticle dispersed gel for water plugging in fractures , 2018, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[70]  Hongbin Yang,et al.  Experimental research of high strength thermally stable organic composite polymer gel , 2018, Journal of Molecular Liquids.

[71]  H. Zhong,et al.  A polymer microsphere emulsion as a high-performance shale stabilizer for water-based drilling fluids , 2018, RSC advances.

[72]  Hongbin Yang,et al.  Preparation of a micron-size silica-reinforced polymer microsphere and evaluation of its properties as a plugging agent , 2018, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[73]  Kun Guo,et al.  A State-of-the-Art Review of Nanoparticles Application in Petroleum with a Focus on Enhanced Oil Recovery , 2018 .

[74]  Ali K. Alhuraishawy,et al.  Experimental Study of Combining Low Salinity Water Flooding and Preformed Particle Gel to Enhance Oil Recovery for Fractured Carbonate Reservoirs , 2018 .

[75]  Liping Ma,et al.  Preparation and application of a novel phenolic resin dispersed particle gel for in-depth profile control in low permeability reservoirs , 2018 .

[76]  S. Salehi,et al.  Smart lost circulation materials for productive zones , 2017, Journal of Petroleum Exploration and Production Technology.

[77]  Yihu Song,et al.  Hydrogen bond reinforced poly(1-vinylimidazole-co-acrylic acid) hydrogels with high toughness, fast self-recovery, and dual pH-responsiveness , 2017 .

[78]  J. Hou,et al.  Development of a High-Temperature Resistant Polymer Gel System for Conformance Control in Jidong Oilfield , 2017 .

[79]  Wei Wang,et al.  Bioinspired fabrication of high strength hydrogels from non-covalent interactions , 2017 .

[80]  Rui Cheng,et al.  Gelation Behavior Study of a Resorcinol–Hexamethyleneteramine Crosslinked Polymer Gel for Water Shut-Off Treatment in Low Temperature and High Salinity Reservoirs , 2017 .

[81]  K. Sepehrnoori,et al.  Modeling preformed particle gel surfactant combined flooding for enhanced oil recovery after polymer flooding , 2017 .

[82]  H. Wyss,et al.  Tough Supramolecular Hydrogel Based on Strong Hydrophobic Interactions in a Multiblock Segmented Copolymer , 2017, Macromolecules.

[83]  Zhiyu Huang,et al.  Synthesis and characterization of water-sensitive core-shell type microspheres for water shut-off in the oil field , 2017, Russian Journal of Applied Chemistry.

[84]  J. Rong,et al.  Dual Physically Cross-Linked Double Network Hydrogels with High Mechanical Strength, Fatigue Resistance, Notch-Insensitivity, and Self-Healing Properties. , 2016, ACS applied materials & interfaces.

[85]  Chen Wang,et al.  Rheological behaviors of fluorinated hydrophobically associating cationic guar gum fracturing gel , 2016 .

[86]  Hong Wang,et al.  A novel strengthened dispersed particle gel for enhanced oil recovery application , 2016 .

[87]  Ping Liu,et al.  The influence of fiber on the rheological properties, microstructure and suspension behavior of the supramolecular viscoelastic fracturing fluid , 2016 .

[88]  Yining Wu,et al.  Investigation on Preparation and Profile Control Mechanisms of the Dispersed Particle Gels (DPG) Formed from Phenol–Formaldehyde Cross-linked Polymer Gel , 2016 .

[89]  Mingzhen Wei,et al.  Successful Field Application of Microgel Treatment in High Temperature High Salinity Reservoir in China , 2016 .

[90]  Xiaomin Zhu,et al.  A Novel Thermal-Resistance and Salt-Tolerance Gel with Low-Concentration Crosslinkers for Water Shutoff in Tahe Oilfield , 2015 .

[91]  Caili Dai,et al.  Experimental study and application of gels formed by nonionic polyacrylamide and phenolic resin for in-depth profile control , 2015 .

[92]  Xiaobo Hu,et al.  Weak Hydrogen Bonding Enables Hard, Strong, Tough, and Elastic Hydrogels , 2015, Advanced materials.

[93]  Guang Zhao,et al.  Enhanced foam stability by adding comb polymer gel for in-depth profile control in high temperature reservoirs , 2015 .

[94]  Xiaoyun Zhang,et al.  High‐temperature‐resistant polymer gel system with metal–organic mixed cross‐linking agents , 2015 .

[95]  Baojun Bai,et al.  A comprehensive review of polyacrylamide polymer gels for conformance control , 2015 .

[96]  J. Plank,et al.  Behavior of Titania Nanoparticles in Cross-linking Hydroxypropyl Guar Used in Hydraulic Fracturing Fluids For Oil Recovery , 2015 .

[97]  C. Pochat‐Bohatier,et al.  Modulating Viscoelastic Properties of Physically Crosslinked Self-Assembled Gelatin Hydrogels through Optimized Solvent Conditions , 2015 .

[98]  Shibin Wang,et al.  A study of relation between suspension behavior and microstructure and viscoelastic property of guar gum fracturing fluid , 2014 .

[99]  B. Bai,et al.  Degradable nanocomposite preformed particle gel for chemical enhanced oil recovery applications , 2014 .

[100]  F. Esmaeilzadeh,et al.  Identification and selection of a stable gel polymer to control or reduce water production in gas condensate fields , 2014 .

[101]  Hu Jia,et al.  Swelling Mechanism Investigation of Microgel with Double-Cross-Linking Structures , 2014 .

[102]  Meiqin Lin,et al.  Study of deep profile control and oil displacement technologies with nanoscale polymer microspheres. , 2014, Journal of colloid and interface science.

[103]  Caili Dai,et al.  A study on environment-friendly polymer gel for water shut-off treatments in low-temperature reservoirs , 2014 .

[104]  K. Sepehrnoori,et al.  New Experiments and Models for Conformance Control Microgels , 2014 .

[105]  I. Hussein,et al.  Polymer Systems for Water Shutoff and Profile Modification: A Review Over the Last Decade , 2014 .

[106]  Pengchong Li,et al.  Facile fabrication method of hydrophobic-associating cross-linking hydrogel with outstanding mechanical performance and self-healing property in the absence of surfactants , 2013 .

[107]  R. Lane,et al.  Delayed Crosslink Polymer Gel System for Water Shutoff in Conventional and Unconventional Oil and Gas Reservoirs , 2013 .

[108]  D. McVay,et al.  Effect of gel damage on fracture fluid cleanup and long-term recovery in tight gas reservoirs , 2012 .

[109]  Pingquan Wang,et al.  Study on a Special Association Polymer Gel Applied in Vicious Lost Circulation in Crushed Zones , 2012 .

[110]  G. Udayabhanu,et al.  Gelation studies of an organically cross-linked polyacrylamide water shut-off gel system at different temperatures and pH , 2012 .

[111]  Hu Jia,et al.  Experimental Investigation of the Novel Phenol-Formaldehyde Cross-Linking HPAM Gel System: Based on the Secondary Cross-Linking Method of Organic Cross-Linkers and Its Gelation Performance Study after Flowing through Porous Media , 2011 .

[112]  Litao Yao,et al.  A new fracturing fluid with combination of single phase microemulsion and gelable polymer system , 2010 .

[113]  Bruno D. Roussennac,et al.  Brightwater trial in Salema Field (Campos Basin, Brazil). , 2010 .

[114]  Guoqing Jiang,et al.  Construction and Properties of Hydrophobic Association Hydrogels with High Mechanical Strength and Reforming Capability , 2009 .

[115]  Y. He,et al.  The Research on Cross-linking Polymer Gel as In-depth Profile Control Agent , 2009 .

[116]  O. Okay,et al.  Preparation of homogeneous polyacrylamide hydrogels by free-radical crosslinking copolymerization , 2007 .

[117]  M. B. Amin,et al.  Viscoelastic properties of a high temperature cross-linked water shut-off polymeric gel , 2007 .

[118]  G. Willhite,et al.  Formation and Propagation of Gel Aggregates Using Partially Hydrolyzed Polyacrylamide and Aluminum Citrate , 2009 .

[119]  Baojun Bai,et al.  Preformed Particle Gel for Conformance Control: Factors Affecting Its Properties and Applications , 2007 .

[120]  Yongan Gu,et al.  Applications of weak gel for in-depth profile modification and oil displacement , 2002 .