Modelling and configuration control of wing-shaped bi-stable piezoelectric composites under aerodynamic loads

Bi-stable composites have been considered for morphing applications thanks to their ability to hold two statically stable shapes with no energy consumption. In this paper, the modelling of the dynamic response of cantilevered wing-shaped bi-stable composites is presented. To this end, an analytical model approximating the dynamic response about each statically stable shape of wing-shaped bi-stable composites is derived. Theoretical modal properties are obtained to attain or stabilise a desired configuration following a previously introduced resonant control strategy. The resonant control technique is evaluated for a wing-shaped bi-stable composite subject to aerodynamic loads. Wind tunnel experiments are conducted on a wing-shaped specimen showing the ability of the control strategy to stabilise or attain a desired stable shape under aerodynamic loads.

[1]  Paul M. Weaver,et al.  A Morphing Composite Air Inlet with Multiple Stable Shapes , 2011 .

[2]  Michael W. Hyer,et al.  Calculations of the Room-Temperature Shapes of Unsymmetric Laminatestwo , 1981 .

[3]  David J. Wagg,et al.  Dynamic Snap-through for Morphing of Bi-stable Composite Plates , 2011 .

[4]  Michael W. Hyer,et al.  SMA-induced snap-through of unsymmetric fiber-reinforced composite laminates , 2003 .

[5]  K. Seffen,et al.  International Journal of Solids and Structures , 2015 .

[6]  Paul M. Weaver,et al.  Bistable prestressed buckled laminates , 2008 .

[7]  Dimitris A. Saravanos,et al.  Coupled mechanics and finite element for non‐linear laminated piezoelectric shallow shells undergoing large displacements and rotations , 2006 .

[8]  Daniel J. Inman,et al.  Electromechanical comparison of cantilevered beams with multifunctional piezoceramic devices , 2012 .

[9]  Michael W. Hyer,et al.  Snap-Through of Unsymmetric Cross-Ply Laminates Using Piezoceramic Actuators , 2003 .

[10]  Michael W. Hyer,et al.  Some Observations on the Cured Shape of Thin Unsymmetric Laminates , 1981 .

[11]  Michael I. Friswell,et al.  Dynamic control of a bistable wing under aerodynamic loading , 2013 .

[12]  Michael W. Hyer,et al.  Natural vibration of unsymmetric cross-ply laminates , 2011 .

[13]  Paul M. Weaver,et al.  A concept for the generation of out-of-plane distortion from tailored FRP laminates , 2004 .

[14]  E. Ventsel,et al.  Thin Plates and Shells: Theory: Analysis, and Applications , 2001 .

[15]  Sergio Pellegrino,et al.  Bistable prestressed shell structures , 2004 .

[16]  S. Tsai,et al.  Introduction to composite materials , 1980 .

[17]  Paul M. Weaver,et al.  Multistable composite plates with piecewise variation of lay-up in the planform , 2009 .

[18]  G. C. Smith,et al.  Frequency-Shaping with Spatial Compensators , 2000 .

[19]  Mohamad S. Qatu,et al.  Vibration of Laminated Shells and Plates , 2004 .

[20]  Phillip L. Gould Thin Plates and Shells , 2013 .

[21]  Dimitris A. Saravanos,et al.  Non-linear coupled multi-field mechanics and finite element for active multi-stable thermal piezoelectric shells , 2008 .

[22]  Peter Hagedorn,et al.  Dynamic control for morphing of bi-stable composites , 2013 .

[23]  Paul M. Weaver,et al.  Analysis of morphing, multi stable structures actuated by piezoelectric patches , 2008 .

[24]  Paul H. Mirick,et al.  Low-cost piezocomposite actuator for structural control applications , 2000, Smart Structures.

[25]  Tadashige Ikeda,et al.  A Two-Way Morphing Actuation of Bi-Stable Composites with Piezoelectric Fibers , 2010 .

[26]  Daniel J. Inman,et al.  Analytical and Experimental Characterization of Macro-Fiber Composite Actuated Thin Clamped-Free Unimorph Benders , 2010 .

[27]  David J. Wagg,et al.  On the cross-well dynamics of a bi-stable composite plate , 2011 .

[28]  Paul M. Weaver,et al.  Bistable plates for morphing structures: A refined analytical approach with high-order polynomials , 2010 .

[29]  Paul M. Weaver,et al.  Concepts for morphing airfoil sections using bi-stable laminated composite structures , 2008 .