Ensuring Availability of a Large Adjustable-Speed Drive for Process Gas Compressor Application Rated 11 kV 15.5 MW (20 778 hp)

Voltage-source inverter (VSI) technology, suitable for synchronous-motor applications, now exists with high power ratings producing high output voltage (≥ 11 kV) with significant benefits over the widely used load-commutated-inverter drives. This paper covers an existing VSI technology applied for the first time at a higher operating voltage. This 15.5-MW 11-kV VSI adjustable-speed drive (ASD) installation is used to soft start three synchronous motors and speed control one of these for a process gas compressor application. Challenges faced during commissioning are described, and associated solutions are presented. A failure analysis of the ASD during commissioning is presented. An ASD design review was undertaken, which has resulted in an improved alternative to the conventional high-voltage busbar design. A protection-coordination study incorporating incoming switchgear and internal drive protection functions is presented. Improved protection schemes and settings are described to obtain faster coordinated fault clearance and improved ASD availability. This paper provides operating experience since the modified ASD has been placed in service in January 2006. Key recommendations are made to enhance the reliability, availability, and performance of medium-voltage drive systems. Also, suggestions are made for additions to the 2006 IEEE 1566 medium-voltage ASD standard.

[1]  R. A. Hanna,et al.  High Resistance Grounding—Avoiding Unnecessary Pitfalls , 2009 .

[2]  R. Emery,et al.  Harmonic losses in LCI fed synchronous motors , 2001, Record of Conference Papers. IEEE incorporated Industry Applications Society. Forty-Eighth Annual Conference. 2001 Petroleum and Chemical Industry Technical Conference (Cat. No.01CH37265).

[3]  Bin Wu,et al.  High-Power Converters and ac Drives: Wu/High-Power Converters and ac Drives , 2006 .

[4]  F. Endrejat,et al.  Experience with new large adjustable speed drive technology for multiple synchronous motors , 2008, 2008 5th Petroleum and Chemical Industry Conference Europe - Electrical and Instrumentation Applications.

[5]  Pablo Lezana,et al.  Operation of a medium-voltage drive under faulty conditions , 2004, IEEE Transactions on Industrial Electronics.

[6]  P. Pillay,et al.  Resonance Overvoltages in Medium Voltage Multilevel Drive System , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[7]  Pablo Lezana,et al.  High-voltage multilevel converter with regeneration capability , 2002, IEEE Trans. Ind. Electron..

[8]  H. Walter,et al.  Asynchronous Solid Rotors as High-Speed Drives in the Megawatt Range , 2007, 2007 IEEE Petroleum and Chemical Industry Technical Conference.

[9]  J. C. Rama,et al.  High-speed electric drives: technology and opportunity , 1997 .

[10]  Bin Wu,et al.  Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[11]  J. Rodriguez,et al.  High voltage multilevel converter with regeneration capability , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[12]  E. Thibaut,et al.  20 Years of Experience in VSDs for High Power Compressors of Steam Crackers , 2007, 2007 4th European Conference on Electrical and Instrumentation Applications in the Petroleum & Chemical Industry.

[13]  Fang Zheng Peng,et al.  Multilevel inverters: a survey of topologies, controls, and applications , 2002, IEEE Trans. Ind. Electron..

[14]  Bin Wu,et al.  High-Power Converters and AC Drives , 2006 .

[15]  P. W. Hammond,et al.  A new approach to enhance power quality for medium voltage AC drives , 1997 .

[16]  B. Lockley,et al.  A Comparison Between the IEEE1566 Standard for Large Adjustable Speed Drives and Comparable IEC Standards , 2007, 2007 4th European Conference on Electrical and Instrumentation Applications in the Petroleum & Chemical Industry.