Fiber Bragg Grating Temperature Sensors in a 6.5-MW Generator Exciter Bridge and the Development and Simulation of Its Thermal Model

This work reports the thermal modeling and characterization of a thyristor. The thyristor is used in a 6.5-MW generator excitation bridge. Temperature measurements are performed using fiber Bragg grating (FBG) sensors. These sensors have the benefits of being totally passive and immune to electromagnetic interference and also multiplexed in a single fiber. The thyristor thermal model consists of a second order equivalent electric circuit, and its power losses lead to an increase in temperature, while the losses are calculated on the basis of the excitation current in the generator. Six multiplexed FBGs are used to measure temperature and are embedded to avoid the effect of the strain sensitivity. The presented results show a relationship between field current and temperature oscillation and prove that this current can be used to determine the thermal model of a thyristor. The thermal model simulation presents an error of 1.5 °C, while the FBG used allows for the determination of the thermal behavior and the field current dependence. Since the temperature is a function of the field current, the corresponding simulation can be used to estimate the temperature in the thyristors.

[1]  K. Sakuno,et al.  Analytical model for electrical and thermal transients of self-heating semiconductor devices , 1998 .

[2]  João Paulo Bazzo,et al.  Thermal characteristics analysis of an IGBT using a fiber Bragg grating , 2012 .

[3]  Hypolito José Kalinowski,et al.  Determination of Temperature Dynamics and Mechanical and Stator Losses Relationships in a Three-Phase Induction Motor Using Fiber Bragg Grating Sensors , 2012, IEEE Sensors Journal.

[4]  Hypolito J. Kalinowski,et al.  Temperature sensing in a 175MW power generator , 2012, Other Conferences.

[5]  P.M. Fabis,et al.  Thermal modeling of diamond-based power electronics packaging , 1999, Fifteenth Annual IEEE Semiconductor Thermal Measurement and Management Symposium (Cat. No.99CH36306).

[6]  W.A. Sethares,et al.  Thermal parameter estimation using recursive identification , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[7]  Bruno Allard,et al.  Choosing a thermal model for electrothermal simulation of power semiconductor devices , 1998 .

[8]  R. Kashyap.  Fiber Bragg Gratings , 1999 .

[9]  J. W. Sofia.  Analysis of thermal transient data with synthesized dynamic models for semiconductor devices , 1994 .

[10]  Niccolò Rinaldi,et al.  On the modeling of the transient thermal behavior of semiconductor devices , 2001 .

[11]  Hypolito José Kalinowski,et al.  Validation of thermal and electrical model for induction motors using fiber Bragg gratings , 2013 .

[12]  Bin Du,et al.  Transient Electrothermal Simulation of Power Semiconductor Devices , 2010, IEEE Transactions on Power Electronics.

[13]  H. Bartelt,et al.  Optical fiber grating sensor networks and their application in electric power facilities, aerospace and geotechnical engineering , 2002, 2002 15th Optical Fiber Sensors Conference Technical Digest. OFS 2002(Cat. No.02EX533).