A method for simplifying the analysis of leg-based visual servoing of parallel robots

As the end-effector pose is an external property of a parallel robot, it is natural to use exteroceptive sensors to measure it in order to suppress inaccuracies coming from modelling errors. Cameras offer this possibility. So, it is possible to obtain higher accuracy than in the case of classic control schemes (based on geometrical model). In some cases, it is impossible to directly observe the end-effector, but the leg directions can instead be used. In this case, however, unusual results were recorded, namely: (i) the possibility of controlling the robot by observing a number of legs less than the total number of legs, and that (ii) in some cases, the robot does not converge to the desired end-effector pose, even if the observed leg directions did. These results can be explained through the use of the hidden robot concept, which is a tangible visualisation of the mapping between the observed leg direction space (internal property) and Cartesian space (external property). This hidden robot has different assembly modes and singular configurations from the real robot, and it is a powerful tool to simplify the analysis of the aforementioned mapping. In this paper, the concept of hidden robot model is generalised for any type of parallel robot controlled through visual servoing based on observation of the leg directions. Validation has been accomplished through experiments on a Quattro robot with 4 dof.

[1]  Philippe Martinet,et al.  Image-based Visual Servoing of a Gough—Stewart Parallel Manipulator using Leg Observations , 2007, Int. J. Robotics Res..

[2]  Marco Carricato,et al.  Singularity-Free Fully-Isotropic Translational Parallel Manipulators , 2002 .

[3]  Damien Chablat,et al.  Stiffness Analysis of Overconstrained Parallel Manipulators , 2009, ArXiv.

[4]  Frank Chongwoo Park,et al.  Parallel Robots , 2015, Encyclopedia of Systems and Control.

[5]  Sébastien Briot,et al.  Minimal representation for the control of Gough-Stewart platforms via leg observation considering a hidden robot model , 2013, 2013 IEEE International Conference on Robotics and Automation.

[6]  François Pierrot.  Modelling and Preliminary Design Issues of a 3-Axis Parallel Machine-Tool , 2002 .

[7]  Sébastien Briot,et al.  Optimal Force Generation in Parallel Manipulators for Passing through the Singular Positions , 2008, Int. J. Robotics Res..

[8]  Michel Benoit,et al.  I4: A new parallel mechanism for Scara motions , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[9]  J. Plucker.  I. On a new geometry of space , Proceedings of the Royal Society of London.

[10]  G. Bogelsack,et al.  Termonology for the theory of machines and mechanisms , 1983 .

[11]  Francois Chaumette,et al.  Potential problems of unstability and divergence in image-based and position-based visual servoing , 1999, 1999 European Control Conference (ECC).

[12]  Masaru Uchiyama,et al.  A New Design of a 6-DOF Parallel Robot , 1990, J. Robotics Mechatronics.

[13]  C. Gosselin,et al.  Singularity Analysis of 3-DOF Planar Parallel Mechanisms via Screw Theory , 2003 .

[14]  Fadi Dornaika,et al.  Visually guided object grasping , 1998, IEEE Trans. Robotics Autom..

[15]  Philippe Martinet,et al.  High speed parallel kinematic manipulator state estimation from legs observation , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  Patrick Rives,et al.  A new approach to visual servoing in robotics , 1992, IEEE Trans. Robotics Autom..

[17]  Philippe Martinet,et al.  Vision-Based Control of a Gough-Stewart Parallel Mechanism using Legs Observation , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[18]  P. Martinet,et al.  Image-based visual servoing of Gough-Stewart parallel manipulators using legs observation , 2006 .

[19]  Patrick Rives,et al.  A new approach to visual servoing in robotics , 1992, IEEE Trans. Robotics Autom..

[20]  Sébastien Briot,et al.  Minimal representation for the control of the Adept Quattro with rigid platform via leg observation considering a hidden robot model , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[21]  Nicolas Andreff,et al.  Vision-based Kinematic Modelling of Some Parallel Manipulators for Control Purposes , 2006 .

[22]  Philippe Martinet,et al.  Vision Based Control Law using 3D Visual Features , 1997 .

[23]  Gregory D. Hager,et al.  The confluence of vision and control, Block Island Workshop on Vision and Control, June 23-27, 1997, Block Island, Rhode Island, USA , 1998, Block Island Workshop on Vision and Control.

[24]  Sébastien Krut,et al.  Par4: very high speed parallel robot for pick-and-place , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[25]  Marco Carricato,et al.  Singularity-Free Fully-Isotropic Translational Parallel Mechanisms , 2002, Int. J. Robotics Res..

[26]  Philippe Martinet,et al.  Dynamic control of the Quattro robot by the leg edges , 2011, 2011 IEEE International Conference on Robotics and Automation.

[27]  M. T. Masouleh,et al.  Forward kinematic problem of 5-RPUR parallel mechanisms (3T2R) with identical limb structures , 2011 .

[28]  Damien Chablat,et al.  Singularity Analysis of a Six-Dof Parallel Manipulator Using Grassmann-Cayley Algebra and Gröbner Bases , 2010 .

[29]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..

[30]  Damien Chablat,et al.  Uniqueness domains and non singular assembly mode changing trajectories , 2011, 2011 IEEE International Conference on Robotics and Automation.

[31]  Philippe Cardou,et al.  The Kinematic Sensitivity of Robotic Manipulators to Joint Clearances , 2010 .

[32]  Jorge Angeles,et al.  The Rule-based Conceptual Design of the Architecture of Serial Schonflies-motion Generators , 2010 .

[33]  Jean-Pierre Merlet,et al.  Jacobian, Manipulability, Condition Number and Accuracy of Parallel Robots , 2005, ISRR.

[34]  G. Gogu.  Structural synthesis of fully-isotropic translational parallel robots via theory of linear transformations , 2004 .