Numerical Modeling of Vertical Geothermal Heat Exchangers Using Finite Difference and Finite Element Techniques

This paper presents the development of a 2D finite difference modelling approach and a 3D finite element numerical model for simulating vertical geothermal heat exchangers (GHEs), explaining the theory governing the thermal processes, element discretization and the selection of the appropriate boundary conditions. Both of these models provide fully coupled solutions for the fluid flow in the circulation pipes and the thermal processes between the fluid and solid domains (pipes, grout and soil). The numerical models are verified with a field test and subsequently they are utilized to simulate the thermal performance of a borehole heat exchanger integrated with a single U-tube. Two different thermal operation cases are analyzed; a constant rate heat injection and a fluid injection at a constant temperature. A model validation study is also carried out for the constant rate heat injection case by comparing the numerical results with the available analytical solution for a finite line source. Furthermore, effective thermal conductivity of the ground back-calculated from the results of the numerical analyses is compared with the value used in the numerical models. Comparison of the results obtained from both numerical models and validating model predictions with the analytical solution confirms that both FE and FD models can accurately simulate the heat transfer mechanisms governing the thermal performance of GHE systems.

[1]  C. Guney Olgun,et al.  Multilayer finite line source model for vertical heat exchangers , 2014 .

[2]  R. Courant,et al.  On the Partial Difference Equations, of Mathematical Physics , 2015 .

[3]  Per Eskilson.  Thermal analysis of heat extraction boreholes , 1987 .

[4]  W. P. Timlake,et al.  A theory of fluid flow in compliant tubes. , 1966, Biophysical journal.

[5]  Swagata Banerjee,et al.  Reliability-Based Assessment of Sustainable Heat Exchange through Pile Foundations , 2014 .

[6]  D. Vries.  Thermal properties of soils , 1963 .

[7]  Weibo Yang,et al.  A Variable Heat Flux Line Source Model For Boreholes In Ground Coupled Heat Pump , 2009, 2009 Asia-Pacific Power and Energy Engineering Conference.

[8]  Simon J. Rees,et al.  A transient two-dimensional finite volume model for the simulation of vertical U-tube ground heat exchangers , 1999 .

[9]  Louis Lamarche,et al.  A new contribution to the finite line-source model for geothermal boreholes , 2007 .

[10]  Fleur Loveridge.  The thermal performance of foundation piles used as heat exchangers in ground energy systems , 2012 .

[11]  C. G. Olgun,et al.  Design and Operational Considerations of Geothermal Energy Piles , 2011 .

[12]  Daniel Pahud,et al.  Numerical evaluation of thermal response tests , 2007 .

[13]  J. Spitler,et al.  In Situ Measurement of Ground Thermal Conductivity: A Dutch Perspective , 2002 .

[14]  D. Marcotte,et al.  On the estimation of thermal resistance in borehole thermal conductivity test , 2008 .

[15]  Murad Abu-Farsakh,et al.  Geo-Congress 2014 Technical Papers , 2014 .

[16]  Z. Fang,et al.  A finite line‐source model for boreholes in geothermal heat exchangers , 2002 .

[17]  R. Al-Khoury,et al.  Efficient finite element formulation for geothermal heating systems. Part I: steady state , 2005 .

[18]  S. Gehlin.  Thermal response test : in situ measurements of thermal properties in hard rock , 1998 .

[19]  Abdeen Mustafa Omer,et al.  Ground-source heat pumps systems and applications , 2008 .

[20]  V. Gnielinski.  New equations for heat and mass transfer in turbulent pipe and channel flow , 1976 .

[21]  R. Al-Khoury,et al.  Efficient finite element formulation for geothermal heating systems. Part II: transient , 2006 .

[22]  H. Brandl.  Energy foundations and other thermo-active ground structures , 2006 .

[23]  J. McCartney,et al.  Analysis of Thermo-Active Foundations With U-Tube Heat Exchangers , 2012 .

[24]  Tolga Y. Ozudogru,et al.  3D Numerical Modeling of Vertical Geothermal Heat Exchangers , 2014 .

[25]  Ladislaus Rybach,et al.  Current status of ground source heat pumps and underground thermal energy storage in Europe , 2003 .

[26]  Stanislaw Kajl,et al.  A review of methods to evaluate borehole thermal resistances in geothermal heat-pump systems , 2010 .

[27]  Cory A. Kramer,et al.  Laboratory Thermal Performance Tests on a Model Heat Exchanger Pile in Sand , 2015, Geotechnical and Geological Engineering.

[28]  William Thomson,et al.  Mathematical and physical papers , 1880 .

[29]  Omar T Farouki,et al.  Thermal properties of soils , 1981 .

[30]  Saqib Javed,et al.  Thermal modelling and evaluation of borehole heat transfer. , 2012 .

[31]  Sherif L. Abdelaziz.  Deep Energy Foundations: Geotechnical Challenges and Design Considerations , 2013 .

[32]  John W. Lund,et al.  Direct utilization of geothermal energy 2010 worldwide review , 2011 .

[33]  Jeffrey D. Spitler,et al.  A short time step response factor model for vertical ground loop heat exchangers , 1999 .

[34]  Miaomiao He.  Numerical modelling of geothermal borehole heat exchanger systems , 2012 .

[35]  S. Rees,et al.  A three-dimensional numerical model of borehole heat exchanger heat transfer and fluid flow , 2013 .

[36]  P. F. Córdoba,et al.  Improving parameter estimates obtained from thermal response tests: Effect of ambient air temperatur , 2011 .

[37]  Prasenjit Basu,et al.  A practical heat transfer model for geothermal piles , 2013 .

[38]  Refrigerating.  ASHRAE handbook and product directory /published by the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc , 1977 .

[39]  Prasenjit Basu,et al.  An Annular Cylinder Source Model for Heat Transfer through Energy Piles , 2013 .