Multiscale modeling of free-surface effect on crack formation in unidirectional off-axis laminates

Abstract A multiscale approach based on the mesh superposition method is applied to unidirectional CFRP laminates to evaluate the influence of the deformation field near the free-surface region on crack formation. Our approach employs two different scale analyses: local analysis utilizing a model composed of carbon fibers with micron-scale diameter and matrix resin, and global analysis employing a homogenized model assumed to be an anisotropic elasto-plastic body. Global analysis is conducted to evaluate the macroscopic deformation behavior of laminates. The local model is superimposed on the global model, maintaining the continuity of the displacement field between global and local domains. Local analysis is then performed to predict crack initiation and crack propagation, using the displacement field obtained from the global analysis. Our simulated results indicate that the initial crack occurring on the free-surface region does not affect the final failure strain.

[1]  C. A. Weeks,et al.  Modeling non-linear rate-dependent behavior in fiber-reinforced composites , 1998 .

[2]  Naoki Takano,et al.  Image-based multi-scale modelling strategy for complex and heterogeneous porous microstructures by mesh superposition method , 2006 .

[3]  Naoki Takano,et al.  Three-scale finite element analysis of heterogeneous media by asymptotic homogenization and mesh superposition methods , 2004 .

[4]  Experimental and numerical studies of initial cracking in CFRP cross-ply laminates , 2015 .

[5]  Naoki Takano,et al.  Global/local modelling of structures with local heterogeneity , 2000 .

[6]  Z. Bažant,et al.  Nonlocal Continuum Damage, Localization Instability and Convergence , 1988 .

[7]  Fabrice Pierron,et al.  Whole-field assessment of the effects of boundary conditions on the strain field in off-axis tensile testing of unidirectional composites , 1998 .

[8]  C. Sun,et al.  A Simple Flow Rule for Characterizing Nonlinear Behavior of Fiber Composites , 1989 .

[9]  A. Gurson.  Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I—Yield Criteria and Flow Rules for Porous Ductile Media , 1977 .

[10]  Masaki Hojo,et al.  Evaluation of interfacial strength in CF/epoxies using FEM and in-situ experiments , 2006 .

[11]  N. Ohno,et al.  Homogenized in-plane elastic-viscoplastic behavior of long fiber-reinforced laminates , 2002 .

[12]  Takashi Kyoya,et al.  Applicability of micro–macro decoupling scheme to two-scale analysis of fiber-reinforced plastics , 2014 .

[13]  N. J. Pagano,et al.  Steady-state cracking and edge effects in thermo-mechanical transverse cracking of cross-ply laminates , 1998 .

[14]  Viggo Tvergaard,et al.  Effects of nonlocal damage in porous plastic solids , 1995 .

[15]  L. Berglund,et al.  Prediction of matrix-initiated transverse failure in polymer composites , 1996 .

[16]  K. Tohgo,et al.  Ply-Cracking Damage and Nonlinear Deformation of CFRP Cross-Ply Laminate , 2002 .

[17]  M. Grédiac,et al.  Assessment of Digital Image Correlation Measurement Errors: Methodology and Results , 2009 .

[18]  Masaki Hojo,et al.  Failure behavior of an epoxy matrix under different kinds of static loading , 2001 .

[19]  Mathias Brieu,et al.  Interlaminar shear strain measurement on angle-ply laminate free edge using digital image correlation , 2009 .

[20]  J. Fish.  The s-version of the finite element method , 1992 .

[21]  J. Tong,et al.  On matrix crack growth in quasi-isotropic laminates—I. Experimental investigation , 1997 .

[22]  K. Shizawa,et al.  A modelling and simulation on failure prediction of ductile polymer based on craze evolution and annihilation , 2004 .

[23]  L. Berglund,et al.  A criterion for crack initiation in glassy polymers subjected to a composite-like stress state , 1996 .

[24]  A. Needleman,et al.  Analysis of the cup-cone fracture in a round tensile bar , 1984 .

[25]  I. Sinclair,et al.  On crack initiation in notched, cross-plied polymer matrix composites , 2015 .

[26]  Hideomi Ohtsubo,et al.  An Elastic and Elasto-Plastic Mixed Analysis Using Overlaying Mesh Method. , 2002 .

[27]  T. Okabe,et al.  A periodic unit-cell simulation of fiber arrangement dependence on the transverse tensile failure in unidirectional carbon fiber reinforced composites , 2011 .

[28]  M. Brieu,et al.  Characterization of free edge effects: influence of mechanical properties, microstructure and structure effects , 2013 .

[29]  S. L. Ogin,et al.  Damage accumulation in woven-fabric CFRP laminates under tensile loading: Part 1. Observations of damage accumulation , 1999 .

[30]  Ian Sinclair,et al.  Damage accumulation in a carbon/epoxy composite: Comparison between a multiscale model and computed tomography experimental results , 2012 .

[31]  I. Sinclair,et al.  Ultra High Resolution Computed Tomography of Damage in Notched Carbon Fiber—Epoxy Composites , 2008 .

[32]  Tomohiro Yokozeki,et al.  Simple constitutive model for nonlinear response of fiber-reinforced composites with loading-directional dependence , 2007 .

[33]  Hideomi Ohtsubo,et al.  Global Local Iterative Analysis Using Overlaying Mesh Method , 2002 .