Impact of Spark Assistance and Multiple Injections on Gasoline PPC Light Load

Along the last years, engine researchers are more and more focusing their efforts on the advanced low temperature combustion (LTC) concepts with the aim of achieving the stringent limits of the current emission legislations. In this regard, several studies based on highly premixed combustion concepts such as HCCI has been confirmed as a promising way to decrease drastically the most relevant CI diesel engineout emissions, NOx and soot. However, the major HCCI drawbacks are the narrow load range, bounded by either misfiring (low load, low speed) or hardware limitations (higher load, higher speeds) and the combustion control (cycle-tocylce control and combustion phasing). Although several techniques have been widely investigated in order to overcome these drawbacks, the high chemical reactivity of the diesel fuel remains as the main limitation for the combustion control. The attempts of the researchers to overcome these disadvantages are shifting to the use of fuels with different reactivity. In this sense, gasoline PPC has been able to reduce emissions and improve efficiency simultaneously, but some drawbacks regarding controllability and stability at low load operating conditions still need solution. In this field, previous researches have been demonstrate the multiple injection strategy as an appropriate technique to enhance the combustion stability. However, PPC combustion has been found limited to engine loads higher than 5 bar BMEP when using fuels with octane number greater than 90. In this regard, previous work from the authors showed the capability of the spark plug to provide combustion control in engine loads below this limit even using 98 ON gasoline. The main objective of the present work is to couple the control capability of the spark assistance together with an appropriate mixture distribution by using double injection strategies with the aim of evaluating performance and engine-out emissions at low load PPC range using a high octane number gasoline. For this purpose the optical and metal version of a compression ignition single-cylinder engine, to allow high compression ratio, has been used during the research. A common rail injection system enabling high injection pressures has been utilized to supply the 98 octane number gasoline. An analysis of the incylinder pressure signal derived parameters, hydroxyl radical (OH*) and natural luminosity images acquired from the transparent engine as well as a detailed analysis of the air/fuel mixing process by means of a 1-D in-house developed spray model (DICOM) has been conducted. Results from both analysis methods, suggest the spark assistance as a proper technique to improve the spatial and temporal control over the low load gasoline PPC combustion process. A noticeable increase in the cycle to cycle repeatability (5% versus 15.1% CoV IMEP at 2 bar load) as well as a reduction in the knocking level (20.5 versus 33.6 MW/m at 7 bar load) is observed. In addition, the combination of the spark assistance with the use of the double injection strategy provides a great improvement in terms of combustion efficiency (93% versus 88% for a single injection strategy) with a benefit around 18% in the IMEP.

[1]  Rakesh Kumar Maurya,et al.  Experimental study of combustion and emission characteristics of ethanol fuelled port injected homogeneous charge compression ignition (HCCI) combustion engine , 2011 .

[2]  Mingfa Yao,et al.  Progress and recent trends in homogeneous charge compression ignition (HCCI) engines , 2009 .

[3]  Zhi Wang,et al.  Comparative study on Gasoline Homogeneous Charge Induced Ignition (HCII) by diesel and Gasoline/Diesel Blend Fuels (GDBF) combustion , 2013 .

[4]  Zhi Wang,et al.  Study of the Effect of Spark Ignition on Gasoline HCCI Combustion , 2006 .

[5]  R. Kiplimo,et al.  Effects of spray impingement, injection parameters, and EGR on the combustion and emission characteristics of a PCCI diesel engine , 2012 .

[6]  Hans-Erik Ångström,et al.  Integrated Simulation and Engine Test of Closed Loop HCCI Control by aid of Variable Valve Timings , 2003 .

[7]  Shuji Kimura,et al.  Ultra - Clean Combustion Technology Combining a Low - Temperature and Premixed Combustion Concept fo , 2001 .

[8]  J. M. Pastor,et al.  A 1D model for the description of mixing-controlled inert diesel sprays , 2008 .

[9]  Gary Kirkpatrick,et al.  Controlled Combustion in an IC-Engine with a Fully Variable Valve Train , 2001 .

[10]  Nick Collings,et al.  Gasoline Fuelled Partially Premixed Compression Ignition in a Light Duty Multi Cylinder Engine: A Study of Low Load and Low Speed Operation , 2009 .

[11]  Jialin Yang,et al.  Development of a Gasoline Engine System Using HCCI Technology - The Concept and the Test Results , 2002 .

[12]  Zhen Huang,et al.  Fuel design and management for the control of advanced compression-ignition combustion modes , 2011 .

[13]  J. Eng,et al.  Characterization of Pressure Waves in HCCI Combustion , 2002 .

[14]  Charles J. Mueller,et al.  Investigation of Fuel Effects on Dilute, Mixing-Controlled Combustion in an Optical Direct-Injection Diesel Engine , 2007 .

[15]  Bengt Johansson,et al.  HCCI Combustion Phasing in a Multi Cylinder Engine Using Variable Compression Ratio , 2002 .

[16]  Jesús Benajes,et al.  An investigation of partially premixed compression ignition combustion using gasoline and spark assistance , 2013 .

[17]  Bengt Johansson,et al.  Investigation of the Early Flame Development in Spark Assisted HCCI Combustion Using High Speed Chemiluminescence Imaging , 2007 .

[18]  Yannis Hardalupas,et al.  Some advantages and challenges of running a Euro IV, V6 diesel engine on a gasoline fuel , 2013 .

[19]  Jose M Garcia-Oliver,et al.  Influence of spray-glow plug configuration on cold start combustion for high-speed direct injection , 2011 .

[20]  J. M. Pastor,et al.  Ignition and combustion development for high speed direct injection diesel engines under low temperature cold start conditions , 2011 .

[21]  Bengt Johansson,et al.  The effect of swirl on spark assisted compression ignition (SACI) , 2007 .

[22]  Hakan Serhad Soyhan,et al.  Thermal analysis of a combustion chamber surrounded by deposits in an HCCI engine , 2013 .

[23]  Raul Payri,et al.  Evaluation of Emissions and Performances from Partially Premixed Compression Ignition Combustion using Gasoline and Spark Assistance , 2013 .

[24]  Bengt Johansson,et al.  Extending the Operating Region of Multi-Cylinder Partially Premixed Combustion using High Octane Number Fuel , 2011 .

[25]  R. Novella,et al.  A new methodology to evaluate engine ignition systems in high density conditions , 2014, Experimental Techniques.

[26]  Horng-Wen Wu,et al.  Reduction of smoke and nitrogen oxides of a partial HCCI engine using premixed gasoline and ethanol with air , 2011 .

[27]  Rakesh Kumar Maurya,et al.  Experimental investigation on the effect of intake air temperature and air-fuel ratio on cycle-to-cycle variations of HCCI combustion and performance parameters , 2011 .

[28]  J. M. Pastor,et al.  A 1D model for the description of mixing-controlled reacting diesel sprays , 2009 .

[29]  O. Armas,et al.  Diagnosis of DI Diesel combustion from in-cylinder pressure signal by estimation of mean thermodynamic properties of the gas , 1999 .

[30]  Peter Weyand,et al.  Ignition Systems for Spray-Guided Stratified Combustion , 2010 .

[31]  Takeshi Miyamoto,et al.  Approaches to Solve Problems of the Premixed Lean Diesel Combustion , 1999 .

[32]  C. Arcoumanis,et al.  Flow and Combustion in Reciprocating Engines , 2009 .

[33]  Volker Sick,et al.  Effect of Spark-Ignition on Combustion Periods during Spark-Assisted Compression Ignition , 2009 .

[34]  Avinash Kumar Agarwal,et al.  Combustion characteristics of diesel HCCI engine: An experimental investigation using external mixture formation technique , 2012 .