Discrete Element Modeling of Stone Masonry Walls With Varying Core Conditions: Prince of Wales Fort Case Study

The Prince of Wales Fort was constructed in the 18th century as a Vauban style stone masonry fortification where the Churchill River flows into Hudson’s Bay, across the river from Churchill, Manitoba, Canada. Since completion the fort has been exposed to harsh weather conditions, which have led to significant deterioration and deformations in the walls, with some cases of localized collapse. Recently, an increase in the rate of degradation has made preventative conservation an issue of interest. For this conservation to be possible, an understanding of the cause of failure of the walls is first required. Discrete element modeling (DEM) using the non-smooth contact dynamics (NSCD) method utilized in the Program LMGC90 has been used as a first step in understanding the failure mechanism of the wall system. The results of the modeling show that the rubble core of the walls can transition from stability to instability as the cohesion between the stones is altered. Grouting the core will alter the bond between stones, increasing the stability of the core, and is thus one possible conservation method.

[1]  Katalin Bagi,et al.  Discrete element analysis of a stone masonry arch , 2009 .

[2]  S. Baars,et al.  DISCRETE ELEMENT MODELING OF GRANULAR MATERIALS , 1996 .

[3]  Ali Rafiee,et al.  SURFACE CONTACT WITH FRICTION BETWEEN POLYHEDRIC DISCRETE ELEMENTS , 2008 .

[4]  M. Jean,et al.  Non-smooth contact dynamics approach of cohesive materials , 2001, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[5]  Jérôme Fortin,et al.  A reliable algorithm to solve 3D frictional multi-contact problems: Application to granular media , 2010, J. Comput. Appl. Math..

[6]  Paulo B. Lourenço,et al.  Experimental investigation on the structural behaviour and strengthening of three-leaf stone masonry walls , 2006 .

[7]  M. Vinches,et al.  Mechanical behaviour of a stone masonry bridge assessed using an implicit discrete element method , 2013 .

[8]  J. J.,et al.  Numerical aspects of the sweeping process , 1999 .

[9]  Gianmarco De Felice,et al.  Out-of-Plane Seismic Capacity of Masonry Depending on Wall Section Morphology , 2011 .

[10]  Antonella Saisi,et al.  COMPATIBILITY OF MATERIALS USED FOR REPAIR OF MASONRY BUILDINGS: RESEARCH AND APPLICATIONS , 2006 .

[11]  José V. Lemos,et al.  Discrete Element Modeling of Masonry Structures , 2007 .

[12]  G. de Saxcé,et al.  Numerical simulation of granular materials by an improved discrete element method , 2005 .

[13]  P. Alart,et al.  Consistent thermodynamic modelling of wire-reinforced geomaterials , 2007 .

[14]  V. Acary,et al.  Nonsmooth fracture dynamics using a cohesive zone approach , 2006 .

[15]  F. Jourdan,et al.  A Gauss-Seidel like algorithm to solve frictional contact problems , 1998 .

[16]  Antonella Saisi,et al.  INVESTIGATION PROCEDURES FOR THE DIAGNOSIS OF HISTORIC MASONRIES , 2000 .

[17]  Patrice Coorevits,et al.  Selecting contact particles in dynamics granular mechanics systems , 2004 .

[18]  SorourMohamed,et al.  An experimental programme for determining the characteristics of stone masonry walls , 2011 .

[19]  Farhang Radjai,et al.  Discrete-element modeling of granular materials , 2011 .

[20]  B. Brogliato,et al.  Numerical Methods for Nonsmooth Dynamical Systems: Applications in Mechanics and Electronics , 2008 .

[21]  Terrence F. Paret,et al.  Using traditional and innovative approaches in the seismic evaluation and strengthening of a historic unreinforced masonry synagogue , 2008 .

[22]  P. Alart,et al.  From discrete to continuous numerical identification of a geomaterial with an internal length , 2009 .

[23]  Pierre Alart,et al.  An alternative method between implicit and explicit schemes devoted to frictional contact problems in deep drawing simulation , 1998 .

[24]  Pierre-Etienne Gautier,et al.  Modelling ballast behaviour under dynamic loading. Part 1: A 2D polygonal discrete element method approach , 2006 .

[25]  Antonella Saisi,et al.  A classification of structures and masonries for the adequate choice of repair. , 2009 .

[26]  Ali Rafiee,et al.  Modelling and analysis of the Nîmes arena and the Arles aqueduct subjected to a seismic loading, using the Non-Smooth Contact Dynamics method , 2008 .

[27]  P. Cundall.  A computer model for simulating progressive, large-scale movements in blocky rock systems , 1971 .

[28]  Miha Tomaževič,et al.  Seismic Behavior of Masonry Walls: Experimental Simulation , 1996 .

[29]  Maria Rosa Valluzzi,et al.  Mechanical behaviour of historic masonry structures strengthened by bed joints structural repointing , 2005 .

[30]  N. Shrive,et al.  The effect of damage and creep interaction on the behaviour of masonry columns including interface debonding and cracking , 2012 .

[31]  Jérôme Fortin,et al.  Discrete modeling of granular flow with thermal transfer: Application to the discharge of silos , 2009 .

[32]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[33]  Antonella Saisi,et al.  Research on historic structures in seismic areas in Italy , 2005 .

[34]  Michel Saint Jean,et al.  The non-smooth contact dynamics method , 1999 .