Dynamic modal characteristics of transverse mode instabilities in ytterbium-doped fiber laser oscillator

In recent years, transverse mode instability (TMI) has been widely observed in fiber laser amplifier systems. The transverse mode instability phenomenon in fiber laser oscillators is less studied. Here, we focus on the dynamical output properties, i.e., its temporal signal and modal characteristics in a 30-μm-core-diameter ytterbium (Yb)-doped fiber laser oscillator. The TMI occurs at a pumping power around 310 W. Different from amplifiers, the basic oscillation frequency is quite low, at around 100 Hz, changing with time and pump power. When the fiber laser oscillator operates beyond TMI threshold at 357 W or 377 W for a while, the temporal fluctuation slowly disappears together with a decreased oscillation frequency, and appears again later. Based on the mode decomposition technique, we find that during the period of fluctuation disappearance at 357 W, the power output stays low and the output beam is still a mixture of fundamental mode and higher-order modes. The fundamental mode content is calculated to be averagely higher when temporal fluctuation disappears, increasing from ∼57% to ∼63%. Our results indicate complex interaction between the fiber laser oscillation and the TMI effect, and calls for more attention into understanding TMI in fiber laser oscillators.

[1]  A. Al‐Sehemi,et al.  Optical-intensity modulators with PbTe thermoelectric nanopowders for ultrafast photonics , 2022, Applied Materials Today.

[2]  A. Stone,et al.  Suppressing transverse mode instability through multimode excitation in a fiber amplifier , 2022, Proceedings of the National Academy of Sciences of the United States of America.

[3]  Xiaojun Xu,et al.  High-peak-power pump-modulated quasi-CW fiber laser. , 2022, Applied optics.

[4]  Xiaohan Chen,et al.  Porous nickel oxide micron polyhedral particles for high-performance ultrafast photonics , 2022, Optics & Laser Technology.

[5]  Wenguang Liu,et al.  Influence of Aberrations on Modal Decomposition for LMA Fiber Laser Systems , 2022, Frontiers in Physics.

[6]  E. Mingione,et al.  Laser cutting of CFRP by Quasi-Continuous Wave (QCW) fibre laser: Effect of process parameters and analysis of the HAZ index , 2021 .

[7]  Xiao-hui Li,et al.  Emerging uniform Cu2O nanocubes for 251st harmonic ultrashort pulse generation , 2020 .

[8]  M. Maack,et al.  Experimental investigations of seeding mechanisms of TMI in rod fiber amplifier using spatially and temporally resolved imaging. , 2020, Optics express.

[9]  G. Shan,et al.  Functional Porous MOF-Derived CuO Octahedra for Harmonic Soliton Molecule Pulses Generation , 2020 .

[10]  Cesar Jauregui,et al.  Transverse mode instability , 2020, 2004.14752.

[11]  Y. Wang,et al.  8-kW single-stage all-fiber Yb-doped fiber laser with a BPP of 0.50 mm-mrad , 2020, LASE.

[12]  Xueming Liu,et al.  Revealing the Transition Dynamics from Q Switching to Mode Locking in a Soliton Laser. , 2019, Physical review letters.

[13]  Liangjin Huang,et al.  Adaptive phase correction of dynamic multimode beam based on modal decomposition. , 2019, Optics express.

[14]  Xueming Liu,et al.  Real-Time Observation of the Buildup of Soliton Molecules. , 2018, Physical review letters.

[15]  Pu Zhou,et al.  Comprehensive Theoretical Study of Mode Instability in High-Power Fiber Lasers by Employing a Universal Model and Its Implications , 2018, IEEE Journal of Selected Topics in Quantum Electronics.

[16]  J. Limpert,et al.  Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier. , 2017, Optics express.

[17]  Pu Zhou,et al.  Experimental Study of Output Characteristics of Bi-Directional Pumping High Power Fiber Amplifier in Different Pumping Schemes , 2017, IEEE Photonics Journal.

[18]  Pu Zhou,et al.  Mitigating transverse mode instability in all-fiber laser oscillator and scaling power up to 2.5 kW employing bidirectional-pump scheme. , 2016, Optics express.

[19]  F. M. Ghaini,et al.  Hot cracking in laser welding of Hastelloy X with pulsed Nd:YAG and continuous wave fiber lasers , 2016 .

[20]  A. Tünnermann,et al.  Narrow linewidth, single mode 3 kW average power from a directly diode pumped ytterbium-doped low NA fiber amplifier. , 2016, Optics express.

[21]  Andreas Tünnermann,et al.  Optimizing mode instability in low-NA fibers by passive strategies. , 2015, Optics letters.

[22]  Pu Zhou,et al.  3.15 kW direct diode-pumped near diffraction-limited all-fiber-integrated fiber laser. , 2015, Applied optics.

[23]  Xiangjie Meng,et al.  2.5 kW monolithic continuous wave (CW) near diffraction-limited fiber laser at 1080 nm , 2014 .

[24]  M. Zervas,et al.  High Power Fiber Lasers: A Review , 2014, IEEE Journal of Selected Topics in Quantum Electronics.

[25]  Eric Honea,et al.  Threshold power and fiber degradation induced modal instabilities in high-power fiber amplifiers based on large mode area fibers , 2014, Photonics West - Lasers and Applications in Science and Engineering.

[26]  K. Hejaz,et al.  Controlling mode instability in a 500 W ytterbium-doped fiber laser , 2014 .

[27]  J. Limpert,et al.  High-power fibre lasers , 2013, Nature Photonics.

[28]  F. Jansen,et al.  Passive mitigation strategies for mode instabilities in high-power fiber laser systems. , 2013, Optics express.

[29]  Iyad Dajani,et al.  Investigations of modal instabilities in fiber amplifiers through detailed numerical simulations. , 2013, Optics express.

[30]  A. Smith,et al.  Spontaneous Rayleigh Seed for Stimulated Rayleigh Scattering in High Power Fiber Amplifiers , 2013, IEEE Photonics Journal.

[31]  Arlee V. Smith,et al.  Increasing mode instability thresholds of fiber amplifiers by gain saturation. , 2013, Optics express.

[32]  Kristian Rymann Hansen,et al.  Theoretical analysis of mode instability in high-power fiber amplifiers. , 2013, Optics express.

[33]  Jörg Neumann,et al.  Beam quality degradation of a single-frequency Yb-doped photonic crystal fiber amplifier with low mode instability threshold power. , 2012, Optics letters.

[34]  Cesar Jauregui,et al.  Temporal dynamics of mode instabilities in high-power fiber lasers and amplifiers. , 2012, Optics express.

[35]  T. Eidam,et al.  Physical origin of mode instabilities in high-power fiber laser systems. , 2012, Optics express.

[36]  B. Ward,et al.  Origin of thermal modal instabilities in large mode area fiber amplifiers. , 2012, Optics express.

[37]  Cesar Jauregui,et al.  High-speed modal decomposition of mode instabilities in high-power fiber lasers. , 2011, Optics letters.

[38]  T. Eidam,et al.  Experimental observations of the threshold-like onset of mode instabilities in high power fiber amplifiers. , 2011, Optics express.

[39]  Arlee V. Smith,et al.  Mode instability in high power fiber amplifiers. , 2011, Optics express.

[40]  David J. Richardson,et al.  High power fiber lasers: current status and future perspectives [Invited] , 2010 .

[41]  D. Payne,et al.  High-Power Fiber Lasers , 2005, Science.

[42]  Y. Jeong,et al.  Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power. , 2004, Optics express.

[43]  J. Limpert,et al.  500 W continuous-wave fibre laser with excellent beam quality , 2003 .

[44]  Yu Ning,et al.  A 6.4-kW peak power near-single-mode quasi-continuous wave fiber laser oscillator employing spindle-shaped ytterbium-doped fiber , 2022, Optics & Laser Technology.

[45]  P. Shum,et al.  Hydrazone organics with third-order nonlinear optical effect for femtosecond pulse generation and control in the L-band , 2022, Optics & Laser Technology.

[46]  Hui Zhao,et al.  Theoretical Insights into Ultrafast Dynamics in Quantum Materials , 2021 .