Chip temperatures above 175 /spl deg/C are a demand for future power module applications. Low temperature joining technique, LTJT, shows excellent thermal and mechanical characteristics. The highly reliable joints stay stable even above 300 /spl deg/C although the joining process takes place at 230 /spl deg/C. Thus LTJT is currently investigated for application in high temperature electronics. LTJT is known to work for large area junctions like for chip- or substrate-mount. Taking advantage of its full performance would only be possible if both sides of a chip were joined by a LTJT method. Here a new development on LTJT is presented that expands its application to top-side chip contacts. The new method is based on using a dispenser for the silver powder application. The new degree of freedom in structuring junctions is presented, and the characteristics of the dot shaped contacts are investigated. It is shown that a wire-bond like contact system on the basis of LTJT is practicable and exhibits very good mechanical strength up to 300 /spl deg/C in addition to its well known excellent thermal and electrical conductivity. To sum up LTJT can fulfill all requirements on a joining technique for high temperature module set-up.
[1]
Jan Abraham Ferreira,et al.
High temperature, high power density packaging for automotive applications
,
2003,
IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..
[2]
S. Klaka,et al.
Reduction of thermomechanical stress by applying a low temperature joining technique
,
1994,
Proceedings of the 6th International Symposium on Power Semiconductor Devices and Ics.
[3]
H. Schwarzbauer,et al.
Novel large area joining technique for improved power device performance
,
1989,
Conference Record of the IEEE Industry Applications Society Annual Meeting,.