Fuel Economy Improvement and Knock Tendency Reduction of a Downsized Turbocharged Engine at Full Load Operations through a Low-Pressure EGR System

[1]  Fabio Bozza,et al.  Fuel Consumption Optimization and Noise Reduction in a Spark-Ignition Turbocharged VVA Engine , 2013 .

[2]  Fabio Bozza,et al.  Knock Detection in a Turbocharged S.I. Engine Based on ARMA Technique and Chemical Kinetics , 2013 .

[3]  T. W. Ryan,et al.  Performance Predictions for High Efficiency Stoichiometric Spark Ignited Engines , 2005 .

[4]  Fabio Bozza,et al.  Numerical and Experimental Investigation of Fuel Effects on Knock Occurrence and Combustion Noise in a 2-Stroke Engine , 2012 .

[5]  Darko Kozarac,et al.  Experimentally Supported Modeling of Cycle-to-Cycle Variations of SI Engine Using Cycle-Simulation Model , 2014 .

[6]  Zlatina Dimitrova,et al.  Synergies between High EGR Operation and GDI Systems , 2008 .

[7]  Hans-Erik Ångström,et al.  Replacing Fuel Enrichment in a Turbo Charged SI Engine: Lean Burn or Cooled EGR , 1999 .

[8]  Fabio Bozza,et al.  A Two-Stroke Engine Model Based on Advanced Simulation of Fundamental Processes , 1995 .

[9]  F. Bozza,et al.  Cycle-by-Cycle Analysis, Knock Modeling and Spark-Advance Setting of a “Downsized” Spark-Ignition Turbocharged Engine , 2009 .

[10]  Alasdair Cairns,et al.  Exhaust Gas Recirculation for Improved Part and Full Load Fuel Economy in a Turbocharged Gasoline Engine , 2006 .

[11]  Fabio Bozza,et al.  A Knock Model for 1D Simulations Accounting for Cyclic Dispersion Phenomena , 2014 .

[12]  James C. Keck,et al.  Explosions of adiabatically compressed gases in a constant volume bomb , 1988 .

[13]  Federico Millo,et al.  A Methodology to Mimic Cycle to Cycle Variations and to Predict Knock Occurrence through Numerical Simulation , 2014 .

[14]  P. Lutz,et al.  Cooled EGR for a Turbo SI Engine to Reduce Knocking and Fuel Consumption , 2007 .

[15]  James C. Keck,et al.  Autoignition of adiabatically compressed combustible gas mixtures , 1987 .

[16]  D. B. Rhodes,et al.  Laminar burning speed measurements of indolene-air-diluent mixtures at high pressures and temperatures , 1985 .

[17]  G. Fontana,et al.  Variable valve timing for fuel economy improvement in a small spark-ignition engine , 2009 .

[18]  Fabio Bozza,et al.  Experimental and Numerical Analyses for the Characterization of the Cyclic Dispersion and Knock Occurrence in a Small-Size SI Engine , 2010 .

[19]  Fabio Bozza,et al.  Hierarchical 1D/3D Approach for the Development of a Turbulent Combustion Model Applied to a VVA Turbocharged Engine. Part I: Turbulence Model , 2014 .

[20]  Jonathan Chauvin,et al.  LP EGR and IGR Compromise on a GDI Engine at Middle Load , 2013 .

[21]  Johan Wallesten,et al.  Influence of Valve Overlap Strategies on Residual Gas Fraction and Combustion in a Spark-Ignition Engine at Idle , 1997 .

[22]  Kengo Kumano,et al.  Analysis of Knocking Suppression Effect of Cooled EGR in Turbo-Charged Gasoline Engine , 2014 .

[23]  G. Fontana,et al.  Experimental analysis of a spark-ignition engine using exhaust gas recycle at WOT operation , 2010 .

[24]  Atsushi Watanabe,et al.  A Newly Developed Intelligent Variable Valve Timing System - Continuously Controlled Cam Phasing as Applied to a New 3 Liter Inline 6 Engine , 1996 .

[25]  Mohammad Hassan Shojaeefard,et al.  Cooled EGR for a Turbo Charged SI Engine to Reduce Knocking and Fuel Consumption , 2013 .

[26]  M. Sellnau,et al.  2-step Variable Valve Actuation: System Optimization and Integration on an SI Engine , 2006 .

[27]  Peter Heuser,et al.  Strategies to Improve SI-Engine Performance by Means of Variable Intake Lift, Timing and Duration , 1992 .

[28]  E. Galloni,et al.  Numerical analyses of EGR techniques in a turbocharged spark-ignition engine , 2012 .

[29]  Cecile Pera,et al.  Exploitation of Multi-Cycle Engine LES to Introduce Physical Perturbations in 1D Engine Models for Reproducing CCV , 2012 .

[30]  Tao Xu,et al.  The engine knock analysis – An overview , 2012 .

[31]  Darius Mehta,et al.  The Effect of EGR on Low-Speed Pre-Ignition in Boosted SI Engines , 2011 .

[32]  Tie Li,et al.  Combined effects of cooled EGR and a higher geometric compression ratio on thermal efficiency improvement of a downsized boosted spark-ignition direct-injection engine , 2014 .

[33]  Shigeyuki Tanaka,et al.  A reduced chemical kinetic model for HCCI combustion of primary reference fuels in a rapid compression machine , 2003 .

[34]  L. D. Francqueville,et al.  On the Effects of EGR on Spark-Ignited Gasoline Combustion at High Load , 2014 .

[35]  Fabio Bozza,et al.  Strategies for Improving Fuel Consumption at Part-Load in a Downsized Turbocharged SI Engine: a Comparative Study , 2014 .