Electrochemical performance of Li-ion batteries assembled with water-processable electrodes

[1]  P. Prosini,et al.  Poly vinyl acetate used as a binder for the fabrication of a LiFePO4-based composite cathode for lithium-ion batteries , 2014 .

[2]  H. Zhong,et al.  Investigation on Carboxymethyl Chitosan as New Water Soluble Binder for LiFePO4 Cathode in Li-Ion Batteries , 2014 .

[3]  Chia‐Chen Li,et al.  Gelation or dispersion of LiFePO4 in water-based slurry? , 2013 .

[4]  Minh Hien Thi Nguyen,et al.  Application of a new acrylonitrile/butylacrylate water-based binder for negative electrodes of lithium-ion batteries , 2013 .

[5]  H Zhao,et al.  An environmentally benign LIB fabrication process using a low cost, water soluble and efficient binder , 2013 .

[6]  Seung M. Oh,et al.  A photo-cross-linkable polymeric binder for silicon anodes in lithium ion batteries , 2013 .

[7]  Chia‐Chin Chang,et al.  Effects of Styrene-Butadiene Rubber/Carboxymethylcellulose (SBR/CMC) and Polyvinylidene Difluoride (PVDF) Binders on Low Temperature Lithium Ion Batteries , 2013 .

[8]  P. Zhou,et al.  Micro/nano-structured SnS2 negative electrodes using chitosan derivatives as water-soluble binders for Li-ion batteries , 2013, Journal of Applied Electrochemistry.

[9]  Hung-Chun Wu,et al.  Enhanced High-Temperature Cycle-Life of Mesophase Graphite Anode with Styrene–Butadiene Rubber/Carboxymethyl Cellulose Binder , 2012 .

[10]  M. R. Palacín,et al.  On the impact of the slurry mixing procedure in the electrochemical performance of composite electro , 2011 .

[11]  Chia‐Chen Li,et al.  Effects of Surface-coated Carbon on the Chemical Selectivity for Water-Soluble Dispersants of LiFePO4 , 2011 .

[12]  Y. Abu-Lebdeh,et al.  Water-soluble binders for MCMB carbon anodes for lithium-ion batteries , 2011 .

[13]  Ke Yang,et al.  Electrochemical characteristics and intercalation mechanism of ZnS/C composite as anode active material for lithium-ion batteries , 2011 .

[14]  D. Guyomard,et al.  Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes , 2010 .

[15]  Chia-Chen Li,et al.  Using Poly(4-Styrene Sulfonic Acid) to Improve the Dispersion Homogeneity of Aqueous-Processed LiFePO4 Cathodes , 2010 .

[16]  Young-Min Choi,et al.  Evaluation of Surface Acid and Base Properties of LiFePO4 in Aqueous Medium with pH and Its Electrochemical Properties , 2010 .

[17]  H. Chiu,et al.  Carbon nanobeads as an anode material on high rate capability lithium ion batteries , 2009 .

[18]  Á. Caballero,et al.  A high energy Li-ion battery based on nanosized LiNi0.5Mn1.5O4 cathode material , 2008 .

[19]  Y. Kadoma,et al.  Improvement of electrochemical characteristics of natural graphite negative electrode coated with polyacrylic acid in pure propylene carbonate electrolyte , 2007 .

[20]  K. Zaghib,et al.  LiFePO4 water-soluble binder electrode for Li-ion batteries , 2007 .

[21]  Young-Min Choi,et al.  Aqueous processing of natural graphite particulates for lithium-ion battery anodes and their electrochemical performance , 2005 .

[22]  Yuwon Park,et al.  Characteristics of surface films formed at a mesocarbon microbead electrode in a Li-ion battery , 2000 .