Key Parameters Requirements for Non‐Fullerene‐Based Organic Solar Cells with Power Conversion Efficiency >20%

The reported power conversion efficiencies (PCEs) of nonfullerene acceptor (NFA) based organic photovoltaics (OPVs) now exceed 14% and 17% for single‐junction and two‐terminal tandem cells, respectively. However, increasing the PCE further requires an improved understanding of the factors limiting the device efficiency. Here, the efficiency limits of single‐junction and two‐terminal tandem NFA‐based OPV cells are examined with the aid of a numerical device simulator that takes into account the optical properties of the active material(s), charge recombination effects, and the hole and electron mobilities in the active layer of the device. The simulations reveal that single‐junction NFA OPVs can potentially reach PCE values in excess of 18% with mobility values readily achievable in existing material systems. Furthermore, it is found that balanced electron and hole mobilities of >10−3 cm2 V−1 s−1 in combination with low nongeminate recombination rate constants of 10−12 cm3 s−1 could lead to PCE values in excess of 20% and 25% for single‐junction and two‐terminal tandem OPV cells, respectively. This analysis provides the first tangible description of the practical performance targets and useful design rules for single‐junction and tandem OPVs based on NFA materials, emphasizing the need for developing new material systems that combine these desired characteristics.

[1]  Yong Cao,et al.  Organic and solution-processed tandem solar cells with 17.3% efficiency , 2018, Science.

[2]  Jingwen Zhang,et al.  Organic Solar Cell Materials toward Commercialization. , 2018, Small.

[3]  T. Anthopoulos,et al.  Charge Photogeneration and Recombination in Mesostructured CuSCN‐Nanowire/PC70BM Solar Cells , 2018 .

[4]  Z. Tang,et al.  A Highly Efficient Non‐Fullerene Organic Solar Cell with a Fill Factor over 0.80 Enabled by a Fine‐Tuned Hole‐Transporting Layer , 2018, Advanced materials.

[5]  H. Ade,et al.  A Wide Band Gap Polymer with a Deep Highest Occupied Molecular Orbital Level Enables 14.2% Efficiency in Polymer Solar Cells. , 2018, Journal of the American Chemical Society.

[6]  Armantas Melianas,et al.  Thermal annealing reduces geminate recombination in TQ1:N2200 all-polymer solar cells , 2018 .

[7]  Yongsheng Chen,et al.  Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11% , 2018, Advanced materials.

[8]  Stephen R. Forrest,et al.  High fabrication yield organic tandem photovoltaics combining vacuum- and solution-processed subcells with 15% efficiency , 2018 .

[9]  Fei Huang,et al.  Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells. , 2018, Chemical reviews.

[10]  H. Ade,et al.  A High‐Efficiency Organic Solar Cell Enabled by the Strong Intramolecular Electron Push–Pull Effect of the Nonfullerene Acceptor , 2018, Advanced materials.

[11]  Frédéric Laquai,et al.  Impact of Nonfullerene Acceptor Core Structure on the Photophysics and Efficiency of Polymer Solar Cells , 2018 .

[12]  R. Friend,et al.  Organic solar cells based on non-fullerene acceptors. , 2018, Nature materials.

[13]  Yongfang Li,et al.  Synergistic effect of fluorination on both donor and acceptor materials for high performance non-fullerene polymer solar cells with 13.5% efficiency , 2018, Science China Chemistry.

[14]  R. Friend,et al.  Fine‐Tuning the Energy Levels of a Nonfullerene Small‐Molecule Acceptor to Achieve a High Short‐Circuit Current and a Power Conversion Efficiency over 12% in Organic Solar Cells , 2018, Advanced materials.

[15]  H. Ade,et al.  Design of a New Small‐Molecule Electron Acceptor Enables Efficient Polymer Solar Cells with High Fill Factor , 2017, Advanced materials.

[16]  Vincent M. Le Corre,et al.  Charge Carrier Extraction in Organic Solar Cells Governed by Steady‐State Mobilities , 2017 .

[17]  Aram Amassian,et al.  Polymer Main‐Chain Substitution Effects on the Efficiency of Nonfullerene BHJ Solar Cells , 2017 .

[18]  Zhe Li,et al.  An Efficient, “Burn in” Free Organic Solar Cell Employing a Nonfullerene Electron Acceptor , 2017, Advanced materials.

[19]  H. Ade,et al.  Achieving Highly Efficient Nonfullerene Organic Solar Cells with Improved Intermolecular Interaction and Open‐Circuit Voltage , 2017, Advanced materials.

[20]  H. Yao,et al.  Fine-Tuned Photoactive and Interconnection Layers for Achieving over 13% Efficiency in a Fullerene-Free Tandem Organic Solar Cell. , 2017, Journal of the American Chemical Society.

[21]  Yun Zhang,et al.  Molecular Optimization Enables over 13% Efficiency in Organic Solar Cells. , 2017, Journal of the American Chemical Society.

[22]  He Yan,et al.  A Wide-Bandgap Donor Polymer for Highly Efficient Non-fullerene Organic Solar Cells with a Small Voltage Loss. , 2017, Journal of the American Chemical Society.

[23]  Chunru Wang,et al.  Fused Nonacyclic Electron Acceptors for Efficient Polymer Solar Cells. , 2017, Journal of the American Chemical Society.

[24]  I. McCulloch,et al.  Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c6ee02598f Click here for additional data file. , 2016, Energy & environmental science.

[25]  Yongfang Li,et al.  Side-Chain Isomerization on an n-type Organic Semiconductor ITIC Acceptor Makes 11.77% High Efficiency Polymer Solar Cells. , 2016, Journal of the American Chemical Society.

[26]  Jegadesan Subbiah,et al.  Reduced Recombination in High Efficiency Molecular Nematic Liquid Crystalline: Fullerene Solar Cells , 2016 .

[27]  Long Ye,et al.  Energy‐Level Modulation of Small‐Molecule Electron Acceptors to Achieve over 12% Efficiency in Polymer Solar Cells , 2016, Advanced materials.

[28]  H. Ade,et al.  Fast charge separation in a non-fullerene organic solar cell with a small driving force , 2016, Nature Energy.

[29]  Alberto Salleo,et al.  High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor , 2016, Nature Communications.

[30]  Feng Gao,et al.  Fullerene‐Free Polymer Solar Cells with over 11% Efficiency and Excellent Thermal Stability , 2016, Advanced materials.

[31]  D. Neher,et al.  Dispersive Non-Geminate Recombination in an Amorphous Polymer:Fullerene Blend , 2016, Scientific Reports.

[32]  Vincent M. Le Corre,et al.  Homo‐Tandem Polymer Solar Cells with VOC >1.8 V for Efficient PV‐Driven Water Splitting , 2016, Advanced materials.

[33]  Oskar J. Sandberg,et al.  Relating Charge Transport, Contact Properties, and Recombination to Open-Circuit Voltage in Sandwich-Type Thin-Film Solar Cells , 2016 .

[34]  B. Lassen,et al.  Role of the Charge-Transfer State in Reduced Langevin Recombination in Organic Solar Cells: A Theoretical Study , 2015, The journal of physical chemistry. C, Nanomaterials and interfaces.

[35]  Timothy M. Burke,et al.  Charge‐Carrier Mobility Requirements for Bulk Heterojunction Solar Cells with High Fill Factor and External Quantum Efficiency >90% , 2015 .

[36]  Timothy M. Burke,et al.  Beyond Langevin Recombination: How Equilibrium Between Free Carriers and Charge Transfer States Determines the Open‐Circuit Voltage of Organic Solar Cells , 2015 .

[37]  Dieter Neher,et al.  Competition between recombination and extraction of free charges determines the fill factor of organic solar cells , 2015, Nature Communications.

[38]  S. Albrecht,et al.  Impact of charge transport on current–voltage characteristics and power-conversion efficiency of organic solar cells , 2015, Nature Communications.

[39]  Ping Chen,et al.  Lending Triarylphosphine Oxide to Phenanthroline: a Facile Approach to High‐Performance Organic Small‐Molecule Cathode Interfacial Material for Organic Photovoltaics utilizing Air‐Stable Cathodes , 2014 .

[40]  F. Laquai,et al.  Control of charge generation and recombination in ternary polymer/polymer:fullerene photovoltaic blends using amorphous and semi-crystalline copolymers as donors. , 2014, Physical chemistry chemical physics : PCCP.

[41]  C. Brabec,et al.  Increased Open‐Circuit Voltage of Organic Solar Cells by Reduced Donor‐Acceptor Interface Area , 2014, Advanced materials.

[42]  Juliane Kniepert,et al.  A Conclusive View on Charge Generation, Recombination, and Extraction in As‐Prepared and Annealed P3HT:PCBM Blends: Combined Experimental and Simulation Work , 2014 .

[43]  R. Friend,et al.  Bimolecular recombination in organic photovoltaics. , 2014, Annual review of physical chemistry.

[44]  A. Heeger,et al.  Transient Photocurrent Response of Small‐Molecule Bulk Heterojunction Solar Cells , 2014, Advanced materials.

[45]  Juliane Kniepert,et al.  Nongeminate and Geminate Recombination in PTB7:PCBM Solar Cells , 2014, 2106.10101.

[46]  Timothy M. Burke,et al.  How High Local Charge Carrier Mobility and an Energy Cascade in a Three‐Phase Bulk Heterojunction Enable >90% Quantum Efficiency , 2014, Advanced materials.

[47]  Aram Amassian,et al.  Efficient charge generation by relaxed charge-transfer states at organic interfaces. , 2014, Nature materials.

[48]  C. Groves.  Suppression of geminate charge recombination in organic photovoltaic devices with a cascaded energy heterojunction , 2013 .

[49]  Weiwei Li,et al.  Efficient tandem and triple-junction polymer solar cells. , 2013, Journal of the American Chemical Society.

[50]  H. Hoppe,et al.  Improvement of photovoltaic performance by ternary blending of amorphous and semi-crystalline polymer analogues with PCBM , 2013 .

[51]  K. Leo,et al.  Optimum mobility, contact properties, and open-circuit voltage of organic solar cells: A drift-diffusion simulation study , 2012 .

[52]  Juliane Kniepert,et al.  Photogeneration and Recombination in P3HT/PCBM Solar Cells Probed by Time-Delayed Collection Field Experiments , 2011 .

[53]  Jan Gilot,et al.  Optimizing Polymer Tandem Solar Cells , 2010, Advanced materials.

[54]  K. Taretto,et al.  Mobility dependent efficiencies of organic bulk heterojunction solar cells: Surface recombination and charge transfer state distribution , 2009 .

[55]  B. de Boer,et al.  Device operation of organic tandem solar cells , 2008 .

[56]  Valentin D. Mihailetchi,et al.  Ultimate efficiency of polymer/fullerene bulk heterojunction solar cells , 2006 .