Detection of bacteria based on the thermomechanical noise of a nanomechanical resonator: origin of the response and detection limits

We have measured the effect of bacteria adsorption on the resonant frequency of microcantilevers as a function of the adsorption position and vibration mode. The resonant frequencies were measured from the Brownian fluctuations of the cantilever tip. We found that the sign and amount of the resonant frequency change is determined by the position and extent of the adsorption on the cantilever with regard to the shape of the vibration mode. To explain these results, a theoretical one-dimensional model is proposed. We obtain analytical expressions for the resonant frequency that accurately fit the data obtained by the finite element method. More importantly, the theory data shows a good agreement with the experiments. Our results indicate that there exist two opposite mechanisms that can produce a significant resonant frequency shift: the stiffness and the mass of the bacterial cells. Based on the thermomechanical noise, we analyse the regions of the cantilever of lowest and highest sensitivity to the attachment of bacteria. The combination of high vibration modes and the confinement of the adsorption to defined regions of the cantilever allows the detection of single bacterial cells by only measuring the Brownian fluctuations. This study can be extended to smaller cantilevers and other biological systems such as proteins and nucleic acids.

[1]  Jan Greve,et al.  A detailed analysis of the optical beam deflection technique for use in atomic force microscopy , 1992 .

[2]  R. Rosenfeld.  Nature , 2009, Otolaryngology--head and neck surgery : official journal of American Academy of Otolaryngology-Head and Neck Surgery.

[3]  Amit K. Gupta,et al.  Single virus particle mass detection using microresonators with nanoscale thickness , 2004 .

[4]  E. Volterra,et al.  Advanced strength of materials , 1971 .

[5]  Javier Tamayo,et al.  Effect of the adsorbate stiffness on the resonance response of microcantilever sensors , 2006 .

[6]  Bharat Bhushan,et al.  Imaging and measurement of elasticity and friction using the TRmode , 2005 .

[7]  H. Craighead,et al.  Mechanical resonant immunospecific biological detector , 2000 .

[8]  S. Manalis,et al.  Weighing of biomolecules, single cells and single nanoparticles in fluid , 2007, Nature.

[9]  H. Craighead,et al.  Attogram detection using nanoelectromechanical oscillators , 2004 .

[10]  Chad A Mirkin,et al.  Nanostructures in biodiagnostics. , 2005, Chemical reviews.

[11]  N. G. Stephen,et al.  Beam vibration under compressive axial load—upper and lower bound approximation , 1989 .

[12]  B. Bhushan,et al.  Dynamic analysis of torsional resonance mode of atomic force microscopy and its application to in-plane surface property extraction , 2006 .

[13]  P. Saulson,et al.  Thermal noise in mechanical experiments. , 1990, Physical review. D, Particles and fields.

[14]  Mark A. Reed,et al.  Label-free immunodetection with CMOS-compatible semiconducting nanowires , 2007, Nature.

[15]  A. Boisen,et al.  Temperature and pressure dependence of resonance in multi-layer microcantilevers , 2005 .

[16]  U. Dürig,et al.  Interaction force detection in scanning probe microscopy: Methods and applications , 1992 .

[17]  J. Gilman,et al.  Nanotechnology , 2001 .

[18]  M. Roukes,et al.  Ultimate limits to inertial mass sensing based upon nanoelectromechanical systems , 2003, physics/0309075.

[19]  John E. Sader,et al.  Experimental validation of theoretical models for the frequency response of atomic force microscope cantilever beams immersed in fluids , 2000 .

[20]  C. Mirkin,et al.  Scanometric DNA array detection with nanoparticle probes. , 2000, Science.

[21]  Tilman E. Schäffer,et al.  Calculation of thermal noise in an atomic force microscope with a finite optical spot size , 2005 .

[22]  M. Ladisch,et al.  Anomalous resonance in a nanomechanical biosensor , 2006, Proceedings of the National Academy of Sciences.

[23]  Javier Tamayo,et al.  Origin of the response of nanomechanical resonators to bacteria adsorption , 2006 .

[24]  Martin Hegner,et al.  Micromechanical oscillators as rapid biosensor for the detection of active growth of Escherichia coli. , 2005, Biosensors & bioelectronics.

[25]  Martin Hegner,et al.  Rapid functionalization of cantilever array sensors by inkjet printing , 2004 .

[26]  D. Pink,et al.  Thickness and Elasticity of Gram-Negative Murein Sacculi Measured by Atomic Force Microscopy , 1999, Journal of bacteriology.