A micro-aperture electrostatic field mill based on MEMS technology

Abstract A miniature electrostatic field mill has been constructed using a silicon surface micromachining MEMS fabrication process. A moving shuttle with a viewing aperture of 10 μm2 periodically exposes and covers a charge sensing electrode, thus allowing the latter to measure electrostatic field magnitudes. A signal output on the order of 40 nV per V/m of measured field is reported. Electrostatic force is produced by interdigitated comb drives. Mechanical restoring force is produced by a folded beam suspension system. Techniques for reducing unwanted coupling of drive signals are discussed.

[1]  J. N. Chubb,et al.  Instrumentation for electrostatic measurements , 1984 .

[2]  M.N. Horenstein.  A direct gate field-effect transistor for the measurement of DC electric fields , 1985, IEEE Transactions on Electron Devices.

[3]  John G. Trump,et al.  Generating Voltmeter for Pressure‐Insulated High Voltage Sources , 1940 .

[4]  R.D. Dallaire,et al.  Development of Field-Mill Instruments for Ground-Level and Above-Ground Electric Field Measurement Under HVDC Transmission Lines , 1983, IEEE Transactions on Power Apparatus and Systems.

[5]  B. P. Lathi,et al.  Modern Digital and Analog Communication Systems , 1983 .

[6]  Vincent C. Negro,et al.  A Guarded Insulated Gate Field Effect Electrometer , 1967 .

[7]  K. Herstad,et al.  Neasuring Electric Field by Using Perssure Sensitive Elements , 1979, IEEE Transactions on Electrical Insulation.

[8]  J. Alan Chalmers,et al.  The agrimeter for continuous recording of the atmospheric electric field , 1953 .

[9]  J.N. Chubb.  Instrumentation and standards for testing static control materials , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[10]  J. B. McCaslin.  Electrometer for Ionization Chambers Using Metal‐Oxide‐Semiconductor Field‐Effect Transistors , 1964 .

[11]  P. E. Secker,et al.  The desing of simple instruments for measurement of charge on insulating surfaces , 1975 .

[12]  J.N. Chubb.  New designs of 'field mill' type fieldmeters not requiring earthing of rotating chopper , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[13]  W. Mapleson,et al.  Apparatus for the accurate and continuous measurement of the earth's electric field , 1955 .