Fit of anterior restorations made of 3D-printed and milled zirconia: An in-vitro study.
暂无分享,去创建一个
S. Rues | P. Rammelsberg | A. Zenthöfer | F. S. Schwindling | W. Bömicke | R. Erber | C. Lux | Christopher Herpel | Christoph J. Roser | Nathalie Zehender | A. Ilani
[1] D. Bomze,et al. Additive Manufacturing of Lithium Disilicate with the LCM Process for Classic and Non-Prep Veneers: Preliminary Technical and Clinical Case Experience , 2022, Materials.
[2] N. Gjerdet,et al. Fractographic analysis of 35 clinically fractured bi-layered and monolithic zirconia crowns. , 2022, Journal of dentistry.
[3] S. Rues,et al. Strength and reliability of zirconia fabricated by additive manufacturing technology. , 2022, Dental materials : official publication of the Academy of Dental Materials.
[4] J. Tagami,et al. Surface Roughness and Bond Strength of Resin Composite to Additively Manufactured Zirconia with Different Porosities. , 2022, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[5] J. Baskaradoss,et al. Marginal and internal fit of porcelain laminate veneers: A systematic review and meta-analysis. , 2022, The Journal of prosthetic dentistry.
[6] T. Takagaki,et al. MDP Salts: A New Bonding Strategy for Zirconia , 2022, Journal of dental research.
[7] R. Bermejo,et al. Effect of binder system on the thermophysical properties of 3D‐printed zirconia ceramics , 2021, International journal of applied ceramic technology.
[8] F. Mangano,et al. Lithography-based Ceramic Manufacturing (LCM) versus Milled Zirconia Blocks under Uniaxial Compressive Loading: an in vitro Comparative Study. , 2021, Journal of dentistry.
[9] Mathew Kuttolamadom,et al. The Flexural Strength and Flexural Modulus of Stereolithography Additively Manufactured Zirconia with different Porosities. , 2021, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[10] F. Mangano,et al. Trueness and precision of 3D-printed versus milled monolithic zirconia crowns: an in vitro study. , 2021, Journal of dentistry.
[11] R. Agustín-Panadero,et al. Prospective study of monolithic zirconia crowns: clinical behavior and survival rate at a 5-year follow-up. , 2021, Journal of prosthodontic research.
[12] S. Hahnel,et al. [How successful can discolored teeth be esthetically restored with monolithic restorative materials - a case report]. , 2021, Swiss dental journal.
[13] M. Ferrari,et al. A Double-Blind Crossover RCT Analyzing Technical and Clinical Performance of Monolithic ZrO2 Implant Fixed Dental Prostheses (iFDP) in Three Different Digital Workflows , 2021, Journal of clinical medicine.
[14] Yong Wang,et al. Knife-edged crown fabricated by 3-dimensional gel deposition and soft milling. , 2021, The Journal of prosthetic dentistry.
[15] J. Souza,et al. The influence of zirconia veneer thickness on the degree of conversion of resin-matrix cements: an integrative review , 2021, Clinical Oral Investigations.
[16] M. Özcan,et al. An in vitro comparison of the marginal and internal adaptation of ultrathin occlusal veneers made of 3D-printed zirconia, milled zirconia, and heat-pressed lithium disilicate. , 2021, The Journal of prosthetic dentistry.
[17] J. Korostoff,et al. Ceramic Printing - Comparative Study of the Flexural Strength of 3D Printed and Milled Zirconia. , 2021, The International journal of prosthodontics.
[18] Mohammed M Methani,et al. Manufacturing accuracy and volumetric changes of stereolithography additively manufactured zirconia with different porosities. , 2021, The Journal of prosthetic dentistry.
[19] J. Stansbury,et al. 3D printing restorative materials using a stereolithographic technique: a systematic review. , 2020, Dental materials : official publication of the Academy of Dental Materials.
[20] Kyu-Bok Lee,et al. Clinical evaluation of the fit of lithium disilicate crowns fabricated with three different CAD-CAM systems. , 2020, The Journal of prosthetic dentistry.
[21] J. Chevalier,et al. X-ray tomography of additive-manufactured zirconia: Processing defects – Strength relations , 2020 .
[22] G. Benic,et al. Prosthetic outcomes and clinical performance of CAD-CAM monolithic zirconia versus porcelain-fused-to-metal implant crowns in the molar region: 1-year results of a RCT. , 2020, Clinical oral implants research.
[23] A. Sadr,et al. Microcomputed tomography evaluation of cement shrinkage under zirconia versus lithium disilicate veneers. , 2020, The Journal of prosthetic dentistry.
[24] Yongsheng Zhou,et al. Three-dimensional trueness and margin quality of monolithic zirconia restorations fabricated by additive 3D gel deposition. , 2020, Journal of prosthodontic research.
[25] P. Rammelsberg,et al. Three-year clinical performance of monolithic and partially veneered zirconia ceramic fixed partial dentures. , 2020, Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.].
[26] A. Ioannidis,et al. Load-bearing capacity of CAD/CAM 3D-printed zirconia, CAD/CAM milled zirconia, and heat-pressed lithium disilicate ultra-thin occlusal veneers on molars. , 2020, Dental materials : official publication of the Academy of Dental Materials.
[27] M. Revilla‐León,et al. Internal and marginal discrepancies associated with stereolithography (SLA) additively manufactured zirconia crowns. , 2020, The Journal of prosthetic dentistry.
[28] Per Svanborg. A systematic review on the accuracy of zirconia crowns and fixed dental prostheses , 2020, Biomaterial investigations in dentistry.
[29] C. Wulfman,et al. Clinical behavior of second-generation zirconia monolithic posterior restorations: Two-year results of a prospective study with Ex vivo analyses including patients with bruxism clinical signs. , 2019, Journal of dentistry.
[30] Marta Revilla-León,et al. The potential of additive manufacturing technologies and their processing parameters for the fabrication of all-ceramic crowns: A review. , 2019, Journal of esthetic and restorative dentistry : official publication of the American Academy of Esthetic Dentistry ... [et al.].
[31] G. Benic,et al. Load-bearing capacities of ultra-thin occlusal veneers bonded to dentin. , 2019, Journal of the mechanical behavior of biomedical materials.
[32] Kyu-Bok Lee,et al. A Comparison Study of Marginal and Internal Fit Assessment Methods for Fixed Dental Prostheses , 2019, Journal of clinical medicine.
[33] Ana Paula Serro,et al. Additive manufacturing of ceramics for dental applications: A review. , 2019, Dental materials : official publication of the Academy of Dental Materials.
[34] E. Bronkhorst,et al. A threshold gap size for in situ secondary caries lesion development. , 2019, Journal of dentistry.
[35] Eran Dolev,et al. Comparison of marginal fit between CAD-CAM and hot-press lithium disilicate crowns. , 2019, The Journal of prosthetic dentistry.
[36] S. Rues,et al. Tooth substance removal for ceramic single crown materials—an in vitro comparison , 2018, Clinical Oral Investigations.
[37] Amir H. Nejat,et al. Comparison of the mechanical properties of translucent zirconia and lithium disilicate , 2018, The Journal of prosthetic dentistry.
[38] M. Bottino,et al. Ultrathin Monolithic Zirconia Veneers: Reality or Future? Report of a Clinical Case and One-year Follow-up. , 2018, Operative dentistry.
[39] Ji-Man Park,et al. Digital technique for in vivo assessment of internal and marginal fit of fixed dental prostheses. , 2017, The Journal of prosthetic dentistry.
[40] N. Gjerdet,et al. Monolithic zirconia dental crowns. Internal fit, margin quality, fracture mode and load at fracture. , 2017, Dental materials : official publication of the Academy of Dental Materials.
[41] J. Dahl,et al. Internal fit of single crowns produced by CAD‐CAM and lost‐wax metal casting technique assessed by the triple‐scan protocol , 2017, The Journal of prosthetic dentistry.
[42] C. Leevailoj,et al. Fracture Resistance of Lithium Disilicate Ceramics Bonded to Enamel or Dentin Using Different Resin Cement Types and Film Thicknesses , 2017, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[43] L. Cooper,et al. Fracture rate of monolithic zirconia restorations up to 5 years: A dental laboratory survey. , 2016, The Journal of prosthetic dentistry.
[44] Matthias Kern,et al. Influence of restoration thickness and dental bonding surface on the fracture resistance of full-coverage occlusal veneers made from lithium disilicate ceramic. , 2015, Dental materials : official publication of the Academy of Dental Materials.
[45] Mutlu Özcan,et al. Adhesion to zirconia used for dental restorations: a systematic review and meta-analysis. , 2015, The journal of adhesive dentistry.
[46] Wolfgang Wachter,et al. Light curing strategies for lithography-based additive manufacturing of customized ceramics , 2014 .
[47] S. Raith,et al. Effects of differing thickness and mechanical properties of cement on the stress levels and distributions in a three-unit zirconia fixed prosthesis by FEA. , 2014, Journal of prosthodontics : official journal of the American College of Prosthodontists.
[48] S. Minakuchi,et al. Meta-analysis of Bonding Effectiveness to Zirconia Ceramics , 2014, Journal of dental research.
[49] Mathieu Contrepois,et al. Marginal adaptation of ceramic crowns: a systematic review. , 2013, The Journal of prosthetic dentistry.
[50] Á. Della Bona,et al. Evaluation of marginal and internal fit of ceramic crown copings. , 2013, Dental materials : official publication of the Academy of Dental Materials.
[51] M. Bottino,et al. Effects of cement thickness and bonding on the failure loads of CAD/CAM ceramic crowns: multi-physics FEA modeling and monotonic testing. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[52] T. Larson. The clinical significance of marginal fit. , 2012, Northwest dentistry.
[53] Matthias Karl,et al. A new triple-scan protocol for 3D fit assessment of dental restorations. , 2011, Quintessence international.
[54] Per Vult von Steyern,et al. The fit of cobalt-chromium three-unit fixed dental prostheses fabricated with four different techniques: a comparative in vitro study. , 2011, Dental materials : official publication of the Academy of Dental Materials.
[55] K. Boening,et al. Clinical fit of Procera AllCeram crowns. , 2000, The Journal of prosthetic dentistry.
[56] M Andersson,et al. Procera: a new way to achieve an all-ceramic crown. , 1998, Quintessence international.
[57] M. Tuntiprawon,et al. The effect of cement thickness on the fracture strength of all-ceramic crowns. , 1995, Australian dental journal.
[58] J. Meyer,et al. Effect of cement film thickness on the fracture resistance of a machinable glass-ceramic. , 1994, Dental materials : official publication of the Academy of Dental Materials.
[59] S Karlsson,et al. The fit of Procera titanium crowns. An in vitro and clinical study. , 1993, Acta odontologica Scandinavica.
[60] M H Walter,et al. Non-cast titanium restorations in fixed prosthodontics. , 1992, Journal of oral rehabilitation.
[61] G H Johnson,et al. Marginal adaptation of castable ceramic crowns. , 1991, The Journal of prosthetic dentistry.
[62] S. Bayne,et al. Effect of in vivo crown margin discrepancies on periodontal health. , 1991, The Journal of prosthetic dentistry.
[63] S. Bayne,et al. Considerations in measurement of marginal fit. , 1989, The Journal of prosthetic dentistry.
[64] G Oilo,et al. The fit of metal-ceramic crowns, a clinical study. , 1985, Dental materials : official publication of the Academy of Dental Materials.
[65] J. Fleiss,et al. Intraclass correlations: uses in assessing rater reliability. , 1979, Psychological bulletin.
[66] M. Iwaku,et al. Pressuring techniques and cement thickness for cast restorations. , 1978, The Journal of prosthetic dentistry.
[67] J. Mclean,et al. The estimation of cement film thickness by an in vivo technique , 1971, British Dental Journal.
[68] H. Björn,et al. Marginal fit of restorations and its relation to periodontal bone level. II. Crowns. , 1970, Odontologisk revy.