Committee III.2: Fatigue and Fracture

[1]  Bertil Jonsson,et al.  Development of Weld Quality Criteria Based on Fatigue Performance , 2011 .

[2]  Daniel Straub,et al.  Reliability assessment of high cycle fatigue under variable amplitude loading: Review and solutions , 2014 .

[3]  Fei Ding,et al.  A study of loading path influence on fatigue crack growth under combined loading , 2006 .

[4]  Erik Åstrand,et al.  Fatigue life assessment of improved joints welded with alternative welding techniques , 2014 .

[5]  Wolfgang Fricke,et al.  Fatigue analysis of welded joints: state of development , 2003 .

[6]  C. Soares,et al.  Residual Stresses and Distortion in Welds , 2014 .

[8]  Xian-Kui Zhu,et al.  Review of fracture toughness (G, K, J, CTOD, CTOA) testing and standardization , 2012 .

[9]  Jani Romanoff,et al.  Influence of Surface Integrity on the Fatigue Strength of High Strength Steel in Balcony Openings of Cruise Ship Structures , 2013 .

[10]  Georgios Savaidis,et al.  Fatigue assessment of thin‐welded joints with pronounced terminations , 2014 .

[11]  Myung Hyun Kim,et al.  A structural strain method for low-cycle fatigue evaluation of welded components , 2014 .

[12]  Stephen J. Maddox,et al.  Fatigue life prediction for toe ground welded joints , 2009 .

[13]  Junya Hara,et al.  Fatigue strength improvement for ship structures by Ultrasonic Peening , 2012 .

[14]  Zuheir Barsoum,et al.  Fatigue strength improvement of steel structures by high-frequency mechanical impact: proposed fatigue assessment guidelines , 2013, Welding in the World.

[15]  邱伟强,et al.  Comparison analysis between CSR-OT and CSR-H for corrugated bulkhead of large product tankers , 2014 .

[17]  C. Soares,et al.  Fatigue strength experiments of corroded small scale steel specimens , 2014 .

[18]  Nicholas R. Gates,et al.  Notched fatigue behavior and stress analysis under multiaxial states of stress , 2014 .

[19]  Vincent Caccese,et al.  Reduction of overwelding and distortion for naval surface combatants, part 1: Optimized weld sizing for lightweight ship structures , 2014 .

[20]  Jonas W. Ringsberg,et al.  Uncertainty in stress concentration factor computation for ship fatigue design , 2014 .

[21]  Xing Li,et al.  A new stress-based multi-scale failure criterion of composites and its validation in open hole tension tests , 2014 .

[22]  Shan Huang,et al.  Wave loading fatigue reliability and uncertainty analyses for geotechnical pipeline models , 2014 .

[23]  C. Guedes Soares,et al.  Fatigue reliability assessment of a complex welded structure subjected to multiple cracks , 2013 .

[24]  C. Jiang,et al.  A new path-dependent multiaxial fatigue model for metals under different paths , 2014 .

[25]  Klemens Rother,et al.  Fatigue assessment of welded structures: practical aspects for stress analysis and fatigue assessment , 2011 .

[26]  Y. Garbatov,et al.  Spectral fatigue assessment of an offshore wind turbine structure under wave and wind loading , 2013 .

[27]  Luís Simões da Silva,et al.  A comparison of the fatigue behavior between S355 and S690 steel grades , 2012 .

[28]  S. Dana,et al.  Implementation of a Biaxial Resonant Fatigue Test Method on a Large Wind Turbine Blade , 2014 .

[29]  Y. Garbatov,et al.  Fatigue reliability of deck structures subjected to correlated crack growth , 2013 .

[30]  C. Soares,et al.  Fatigue reliability assessment of an offshore supporting structure , 2014 .

[31]  Dale G. Karr,et al.  Fatigue testing of composite patches for ship plating fracture repair , 2017 .

[32]  Lars-Erik Svensson,et al.  Non-destructive measurement of weld toe radius using Weld Impression Analysis, Laser Scanning Profiling and Structured Light Projection methods , 2014 .

[33]  Zuheir Barsoum,et al.  Influence of weld quality on the fatigue strength in seam welds , 2011 .

[34]  Daeyong Lee,et al.  Failure strain formulation via average stress triaxiality of an EH36 high strength steel , 2014 .

[35]  Y. Garbatov,et al.  Fatigue damage analysis of a fixed offshore wind turbine supporting structure , 2013 .

[36]  Chanakya Arya,et al.  Eurocode 3: Design of steel structures , 2018, Design of Structural Elements.

[37]  Neha Rustagi,et al.  Modeling the fatigue crack growth of X100 pipeline steel in gaseous hydrogen , 2014 .

[39]  Cetin Morris Sonsino,et al.  Recent developments in local concepts of fatigue assessment of welded joints , 2009 .

[40]  David Taylor,et al.  The Theory of Critical Distances: A New Perspective in Fracture Mechanics , 2010 .

[41]  James C. Newman,et al.  An empirical stress-intensity factor equation for the surface crack , 1981 .

[42]  M. Godani,et al.  Interlaminar shear strength of marine composite laminates: Tests and numerical simulations , 2014 .

[43]  Darrell F. Socie,et al.  A procedure for estimating the total fatigue life of notched and cracked members , 1979 .

[44]  Michele Zappalorto,et al.  Some remarks on the Neuber rule applied to a control volume surrounding sharp and blunt notch tips , 2014 .

[45]  Pingsha Dong,et al.  A Robust Structural Stress Method for Fatigue Analysis of Offshore/Marine Structures , 2005 .

[46]  C. Guedes Soares,et al.  Probabilistic model of the growth of correlated cracks in a stiffened panel , 2012 .

[47]  Nigel White,et al.  Springing Loads and Fatigue Assessment on Large Container Ships , 2014 .

[48]  Xiao-Bo Chen,et al.  Evaluation of Rule-Based Fatigue Design Loads Associated At a New Probability Level , 2011 .

[49]  Filippo Berto,et al.  Fatigue assessment of welded joints under slit-parallel loading based on strain energy density or notch rounding , 2009 .

[50]  Adolf F. Hobbacher.  New developments at the recent update of the IIW recommendations for fatigue of welded joints and components , 2010 .

[51]  Yves Verreman,et al.  Early development of fatigue cracking at manual fillet welds , 1996 .

[52]  Paolo Ferro,et al.  The local strain energy density approach applied to pre-stressed components subjected to cyclic load , 2014 .

[53]  W. Cui,et al.  Normalised fatigue and fracture properties of candidate titanium alloys used in the pressure hull of deep manned submersibles , 2014 .

[54]  Experimental Fatigue Study of Composite Patch Repaired Steel Plates with Cracks , 2015, Applied Composite Materials.

[55]  Pingsha Dong,et al.  A path-dependent cycle counting method for variable-amplitude multi-axial loading , 2010 .

[56]  A. B. Aghdam,et al.  On the prediction of fatigue life in double shear lap joints including interference fitted pin , 2012 .

[57]  Y. Garbatov,et al.  Fatigue reliability assessment of correlated welded web-frame joints , 2014 .

[58]  Rhys Jones,et al.  Fatigue crack growth and damage tolerance , 2014 .

[59]  W. Elber.  The Significance of Fatigue Crack Closure , 1971 .

[61]  Hussam Mahmoud,et al.  Fatigue reliability of a single stiffened ship hull panel , 2014 .

[62]  C. Guedes Soares,et al.  Numerical and experimental studies on temperature and distortion patterns in butt-welded plates , 2014 .

[63]  A. Kromm,et al.  Fatigue Strength Improvement of Welded Structures Using New Low Transformation Temperature Filler Materials , 2013 .

[64]  Wolfgang Fricke,et al.  Influencing factors on fatigue strength of welded thin plates based on structural stress assessment , 2014, Welding in the World.

[65]  Yong Liu,et al.  Submarine pressure hull butt weld fatigue life reliability prediction method , 2014 .

[66]  C. Soares,et al.  Fatigue crack growth analysis of a plate accounting for retardation effect , 2014 .

[67]  G. Glinka,et al.  Stress Analysis and Fatigue of welded structures , 2011 .

[68]  Pingsha Dong,et al.  A generalized cycle counting criterion for arbitrary multi-axial fatigue loading conditions , 2014 .

[69]  Herwig Mayer,et al.  Variable amplitude loading of Al 2024-T351 at different load ratios using ultrasonic equipment , 2014 .

[70]  Gary Marquis,et al.  Fatigue strength improvement of steel structures by high-frequency mechanical impact: proposed procedures and quality assurance guidelines , 2013, Welding in the World.

[71]  Wei Huang,et al.  Fatigue reliability of a web frame subjected to random non-uniform corrosion wastage , 2014 .

[73]  T Lassen.  THE EFFECT OF THE WELDING PROCESS ON THE FATIGUE CRACK GROWTH , 1990 .

[74]  Stefanie E. Stanzl-Tschegg,et al.  Very high cycle fatigue measuring techniques , 2014 .

[75]  C. Soares,et al.  Tensile strength assessment of corroded small scale specimens , 2014 .

[76]  S. J. Maddox,et al.  IIW recommendations on methods for improving the fatigue strength of welded joints , 2013 .

[77]  C. Guedes Soares,et al.  Fatigue reliability of a stiffened panel subjected to correlated crack growth , 2012 .

[78]  Jani Romanoff,et al.  Influence of surface integrity on the fatigue strength of high-strength steels , 2013 .

[79]  A. Hobbacher,et al.  On Relation Between Fatigue Properties Of Welded Joints, Quality Criteria and Groups in Iso 5817 , 2012, Welding in the World.

[80]  G. Härkegård.  Short-crack modelling of the effect of corrosion pits on the fatigue limit of a 12% Cr steel , 2014 .

[81]  J. E. Garnham,et al.  Review: Low transformation temperature weld filler for tensile residual stress reduction , 2014 .

[82]  Cesare Mario Rizzo,et al.  Numerical Simulation Strategies of Single Lap Joints , 2014 .

[83]  H. Aydın,et al.  Microstructure and mechanical properties of hard zone in friction stir welded X80 pipeline steel relative to different heat input , 2013 .

[84]  Zhang Yufeng,et al.  REVIEW OF THE FATIGUE ASSESSMENT OF WELDED JOINTS BY LOCAL APPROACHES , 2003 .

[85]  Gary Horn,et al.  THE DEVELOPMENT, IMPLEMENTATION AND MAINTENANCE OF IACS COMMON STRUCTURAL RULES FOR BULK CARRIERS AND OIL TANKERS , 2007 .